Restarted repo because it was somehow borked.

20 files changed, 1649 insertions, 0 deletions

diff --git a/Josh Melvin/Joshua Melvin Thesis Defense V2 1.pptx b/Josh Melvin/Joshua Melvin Thesis Defense V2 1.pptx
new file mode 100644
index 0000000..1b00ded
--- /dev/null
+++ b/Josh Melvin/Joshua Melvin Thesis Defense V2 1.pptx
diff --git a/Josh Melvin/Joshua Melvin Thesis Final V8 1.pdf b/Josh Melvin/Joshua Melvin Thesis Final V8 1.pdf
new file mode 100644
index 0000000..549caf4
--- /dev/null
+++ b/Josh Melvin/Joshua Melvin Thesis Final V8 1.pdf
diff --git a/abstract.tex b/abstract.tex
new file mode 100644
index 0000000..af0abac
--- /dev/null
+++ b/abstract.tex
@@ -0,0 +1,18 @@
+%Abstract will go here.  Make sure it remains within the 350 word limit.
+%\par To get a new paragraph
+\par
+This thesis presents the experimental results of a turboelectric-aircraft power system operating under two electrical configurations.  
+Hybrid turboelectric power systems enable increased versitility over their singularly hydrocarbon fuel or electrically based counterparts through the combination of their advantages: energy density
+in the case of combustion power systems, and power density in that of electrical systems. However, much of the research pertaining to such hybrid systems has been analytical, leaving a need for implementation and experimentation to characterize operating performance. 
+The testrig assembled to undertake this work is comprised of a Cessna-172 airframe, a modified 180kW PBS-TP100 turboprop, and the components necessary to create two electrical configurations. The first of these configurations involved the use of a low system voltage,
+battery augmentation, and an inductive load in the form of electic motors; whereas the second configuration used a high system voltage, a variable-resistive load, and electrical power sourced exclusively from a turbine-driven generator. Custom electronics were fabricated to aid in the control of
+the variable-resistive load as well as for protection of the battery.
+The objective of the studies conducted on this system have been to evaluate the transient and steady-state performance of turboelectric aircraft under various engine and electrical load conditions.
+ Configuration one was tested by varying electrical throttle at maximum engine throttle,
+whereas configuration two was tested through repeated variation in electrical load under four fixed engine throttle points.
+ Engine operation data was acquired from every test including output shaft torque, speed of the free and gas turbines,
+and combustion gas temperature, while voltage, current, and power data was recorded at different locations within the electrical systems. Tests conducted on the first configuration
+showed 17kW of peak electrical power: 4kW from the generator and 13kW from the battery; while 142kW of mechanical power was transfered from the turboprop. Test two demonstrated consistent waveforms accross
+all four turbine throttle points, with peak power output reaching 11.5kW from the generator, and XXXXkW from the engine.
+Observations from these tests highlight the importance of capacitance to hybrid powertrains, the forces induced on turbine engines by electric load, and functional safety considerations in the design and operation of hybrid systems.
+This thesis provides insight into practical implementation of turboelectric power systems for future electrified aircraft.
\ No newline at end of file
diff --git a/acknowledge.tex b/acknowledge.tex
new file mode 100644
index 0000000..d8fa589
--- /dev/null
+++ b/acknowledge.tex
@@ -0,0 +1,14 @@
+I would like to thank Dr.~Rouser and Joshua Johnsen for their support and for the opportunities that they've created for me.
+
+I dedicate this work to my siblings, Rachel and Benjamin, whose love and support have enabled my success. 
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% If you Acknowledgments span MORE than one page, the graduate college
+% requires that you have this footer present on every page. In order to put it
+% there, you will put this footer command in some of the text on page 2 (or 3,
+% etc.) in order to ensure a copy of the footer appears on each page:
+
+%\blfootnote{Acknowledgments reflect the views of the author and are not endorsed
+% by committee members or Oklahoma State University.}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/appendix.tex b/appendix.tex
new file mode 100644
index 0000000..3676806
--- /dev/null
+++ b/appendix.tex
@@ -0,0 +1,23 @@
+\appendix
+%\include{chapter-appendix}
+
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter*{\centerline{APPENDICES}}
+\endgroup
+
+% \begin{center}
+% {\bfseries Title of Appendix (Not Numbered)}
+% \end{center}
+
+\section*{Title of Appendix (Not Numbered)}
+\addcontentsline{toc}{chapter}{APPENDICES}
+\renewcommand{\thechapter}{A}
+\numberwithin{equation}{chapter}
+\setcounter{equation}{0}
+%\setcounter{theorem}{0}
+
+
+Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam finibus venenatis dui, a accumsan dui elementum non. Suspendisse suscipit diam sed dapibus mollis. Quisque id congue nisl, auctor elementum turpis. Sed mattis at leo non rhoncus. Donec at rhoncus velit, at dignissim risus. Sed in quam a felis pulvinar bibendum a eget mi. Aliquam ac ligula nec urna pharetra interdum. Nam varius quis dui non finibus. Proin ullamcorper blandit ipsum nec feugiat.
diff --git a/background.tex b/background.tex
new file mode 100644
index 0000000..8c605df
--- /dev/null
+++ b/background.tex
@@ -0,0 +1,64 @@
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter[BACKGROUND]{BACKGROUND}
+\endgroup
+
+
+%\section{Advanced Air Mobility}
+\section{Turbine Engines}
+A cursory understanding of turbine engines is necessarry to contextualize this work, as their improved power to weight ratio and performance at altitude when compared to piston engines make them an ideal choice for use in hybrid electric aircraft. The following is a description of how a general jet engine with a single inlet and exhuast functions. This description corresponds to the station numbering found in \ref{EoPturbojet} and is applicable to the subcategories of turbine engines discuessed later.
+\begin{figure}[h]
+	\centering
+	\includegraphics[width=\textwidth]{img/EoPturbojet.png}
+	\caption{\label{EoPturbojet}Ideal Turbojet with station numbering}
+\end{figure}
+\par
+The Inlet is the first section of the gas turbine engine, denoted by station numbers 0-2, and its operation and design are described in terms of the efficiency of the compression process, the external drag of the inlet, and the mass flow into the inlet. \cite{EoPGTR2} Inlet design is most heavily influenced by whether the air entering it is subsonic or supersonic. Subsonic inlet design is simple, and typically involves selecting an operating velocity at which air compression is most efficient at the expense of performance at other velocities. Supersonic inlets must take the shockwaves endemic to supersonic flow into account for optimal performace. This is accomplished by adjusting inlet geometry to reduce flow velocity while adding as little weight to the system as possible. Variable inlet geometry will allow for increased efficiency accross many velocities.
+\par
+Compressors, denoted by station numbers 2-3, increase the pressure of the flow obtained by the inlet such that the combustion and exhaust processes can be conducted more efficiently. Increasing the pressure of an initial volume of air results in the reduction of its volume, allowing for the combustion of the air/fuel mixture to occur within a smaller volume than it would otherwise. Turbine engines most commonly employ centrifugal or axial compressors. Figure \ref{EoPturbojet} appropriately depicts an axial compressor in the makeup of the common turbine engine by virtue of their superiority. However, centrifugal compressors find use in smaller, less expensive engines due to their simple design. Centrifugal compressors are comprised of an impeller, which serves to increase flow velocity through rotation; a diffuser, which decreases the velocity of the flow thereby increasing its pressure; and a manifold which directs the compressed air into the combustor. Axial compressors are made of a series of stator vanes and rotor blades that are concentric to the axis of rotation. Each set of these stators and rotors is referred to as a stage. ''The flow path in an axial compressor decreases in cross-sectional area in the direction of flow." \cite{EoPturbojet} Each stage of the compressor results in an increase in air density. Thus, multiple stages are used in the design of high compression ratio turbine engines. Many turbines, including that which is depicted in figure \ref{EoPturbojet}, are equiped with dual axial compressors. Dual axial compressors allow for a more uniform loading of compressor stages, as well as for improved flexibility in the balancing between the initial and later stages.
+
+Gas turbine engines fall into four categories: turbofan, turboprop, and turboshaft, and turbojet. Turbojets make use of a propelling nozzle to create thrust by allowing the heated exhaust created by a gas turbine to expand. \cite{nasa_turbojet}
+
+\begin{figure}[h]
+	\centering
+	\includegraphics[width=\textwidth]{img/tp100cutaway.png}
+	\caption{\label{tp100cutaway}PBS TP100 Cutaway}
+\end{figure}
+\section{Generator Theory}
+\section{Battery Theory}
+\section{Turboelectric Theory}
+\begin{figure}[h]
+	\centering
+	\includegraphics[width=\textwidth]{img/turbosystems.png}
+	\caption{\label{turboarch}Turboelectric Architectures}
+\end{figure}
+\begin{figure}[h]
+	\centering
+	\includegraphics[width=.6\textwidth]{img/turboseriesparallel.png}
+	\caption{\label{turboseriesparallel}Parallel Turboelectric Design}
+\end{figure}
+\section{Previous Work}
+
+
+
+% \begin{figure}[!h]
+%  \centering
+%  \includegraphics[width=3in]{osu}
+%  \caption{\label{fig:2-1}Here is a figure.}
+% \end{figure}
+
+% Below is another table.
+
+% \begin{table}[!h]
+%   \centering
+%     \begin{tabular}{| l c r |}
+%     \hline
+%     1 & 2 & 3 \\
+%     4 & 5 & 6 \\
+%     7 & 8 & 9 \\
+%     \hline
+%     \end{tabular}
+%   \caption{A third table}
+% \end{table}
diff --git a/bibliography.tex b/bibliography.tex
new file mode 100644
index 0000000..d45c4f8
--- /dev/null
+++ b/bibliography.tex
@@ -0,0 +1,31 @@
+%%% You can use BibTeX generated references, or type references out yourself.
+%%% You can download BibTeX information from MathSciNet and 
+%%% insert it into the references.bib file. 
+
+\bibliographystyle{osustyle.bst} % Other common styles: abbrv, amsalpha, ieeetr, alpha
+\renewcommand\bibname{REFERENCES}
+
+% Comment out the next line if you wish to do a manual bibliography:
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\bibliography{references.bib}
+\endgroup
+
+% Uncomment the rest of this for a manual bibliography:
+% \begin{thebibliography}{bg}
+% \interlinepenalty=10000
+% \bibitem{K1}
+% R.  Adler, The Geometry of Random Fields, Wiley, Chichester, 1981.
+% 
+% \bibitem{ApostolAnalyticBook}
+% V. Andrievskii, Weighted polynomial inequalities in the complex plane, J. Approx. Theory, 164 (2012), 1165--1183.
+% 
+% \bibitem{LiCai}
+% A. Granville and I. Wigman, The zeros of random trignometric polynomials, Amer. J. Math. 133 (2011), 295--357.
+% 
+% \bibitem{HM}
+% J. Hammersley, The zeros of a random polynomial, Proc. of the Third Berk. Sym. on Math. Stat. and Prob. 1954-1955 vol. II, University of Cal. Press, Berkeley and Los Angeles (1956) 89--111.
+% 
+% \end{thebibliography}
diff --git a/conclusion.tex b/conclusion.tex
new file mode 100644
index 0000000..4b981fb
--- /dev/null
+++ b/conclusion.tex
@@ -0,0 +1,7 @@
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter[CONCLUSION, RECOMMENDATIONS, AND FUTURE WORK]{CONCLUSION, RECOMMENDATIONS, AND FUTURE WORK}
+\endgroup
+
diff --git a/dissertation_main.pdf b/dissertation_main.pdf
new file mode 100644
index 0000000..3846b1c
--- /dev/null
+++ b/dissertation_main.pdf
diff --git a/dissertation_main.tex b/dissertation_main.tex
new file mode 100644
index 0000000..b9729aa
--- /dev/null
+++ b/dissertation_main.tex
@@ -0,0 +1,286 @@
+\documentclass[12pt]{osuthesis}
+\usepackage[letterpaper, margin=1in]{geometry}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% BASIC INSTRUCTIONS:
+% Find the sections marked with a NOTICE of this form and fill in the relevant
+% information. You will then put the substance of your thesis in the separate
+% chapter TeX files. Remember, you will always compile THIS file.
+
+% Warnings on using this file:
+% - osuthesis.cls is not currently compatible with the hyperref package.
+% - Do not include package amsthm, \qed and such commands are already
+%   defined in osuthesis
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\usepackage{amsmath,amssymb}
+\usepackage{graphicx}
+\usepackage{comment}
+\usepackage{enumerate}
+\usepackage{mathrsfs}
+\usepackage{fancyhdr}
+\usepackage{changepage}
+
+\usepackage{afterpage}
+\usepackage[titles]{tocloft}
+
+\usepackage{chngcntr}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% If you want your tables and/or figures to be numbered within chapter and section,
+% change the following two commands to \counterwithin instead of \counterwithout:
+\counterwithout{figure}{chapter}
+\counterwithout{table}{chapter}
+
+\renewcommand{\cftchapaftersnum}{.}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Make any of these widths wider if needed
+\renewcommand*\cftchapnumwidth{3.5em}
+\renewcommand*\cftsecnumwidth{3.4em}
+\renewcommand*\cftsubsecnumwidth{4em}
+% The second argument (1.5em) is the space before the
+% I.1 entry for the figure/table
+% The third argument (4em) is the space to allow for the I.1
+% style entry.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\makeatletter
+%\renewcommand*\l@figure{\@dottedtocline{1}{1.5em}{4em}}
+%\renewcommand*\l@table{\@dottedtocline{1}{1.5em}{4em}}
+\makeatother
+
+
+\numberwithin{equation}{section}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Put your shortcuts for math symbols etc. that you want to use here in this
+% section. They will be available in every chapter file afterwards.
+% Some example shortcuts are included below.
+\def\A{{\mathbb A}}
+\def\C{{\mathbb C}}
+\def\D{{\mathbb D}}
+\def\K{{\mathbb K}}
+\def\L{{\mathbb L}}
+\def\N{{\mathbb N}}
+\def\Q{{\mathbb Q}}
+\def\R{{\mathbb R}}
+\def\Z{{\mathbb Z}}
+\def\E{{\mathbb E}}
+\def\T{{\mathbb T}}
+\def\P{{\mathbb P}}
+\def\S{{\mathbb S}}
+\def\nn{\mathbf{n}}
+\newcommand{\cE}{\mathcal{E}}
+\newcommand{\cF}{\mathcal{F}}
+\def\eps{\varepsilon}
+\def\vp{\varphi}
+\newcommand{\ds}{\displaystyle{}}
+\newcommand{\abs}[1]{\left\lvert#1\right\rvert}
+\newcommand{\BigO}[1]{\ensuremath{\operatorname{O}\bigl(#1\bigr)}}
+\newcommand{\defeq}{\mathrel{\mathop:}=}
+\newcommand{\Var}{\mathrm{Var}}
+\newcommand{\Cov}{\mathrm{Cov}}
+\DeclareMathOperator{\csch}{csch}
+\newcommand{\overbar}[1]{\mkern 1.5mu\overline{\mkern-1.5mu#1\mkern-1.5mu}\mkern 1.5mu}
+\newcommand{\Sp}{\mathbb S}
+\newcommand{\cp}{\operatorname{cap}}
+\newcommand{\dist}{\operatorname{dist}}
+\newcommand{\interi}{\operatorname{int}}
+\newcommand{\norm}[1]{\left\lVert#1\right\rVert} % norm: double vertical bars
+\newcommand{\Beta}{{\rm B}}
+\newcommand{\sn}{{\rm sn}}
+\newcommand{\cn}{{\rm cn}}
+\newcommand{\dn}{{\rm dn}}
+\newcommand{\Ec}{{\rm Ec}}
+\newcommand{\Es}{{\rm Es}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\makeatletter
+\newcommand\Dotfill{\leavevmode \cleaders \hb@xt@ 1.1em{\hss .\hss }\hfill \kern \z@}
+\makeatother
+
+
+\suppressfloats %\nofiles
+
+\newcommand{\supp}{\mathop{{\rm supp}}}
+\newcommand{\esssup}{\mathop{{\rm ess\,sup}}}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Fill in your title and other information here.
+
+\title{Experimental Evaluation of Transient and Steady-State Characteristics of a 180kW Turboelectric-Aircraft Testrig}
+\formattedtitle{EXPERIMENTAL EVALUATION OF TRANSIENT AND\\
+                 STEADY-STATE CHARACTERISTICS OF A 180KW\\
+                 TURBOELECTRIC-AIRCRAFT TESTRIG}
+
+\author{JOSHUA DRAKE}
+
+\degreeone{\ssp Bachelor of Science in Electrical Engineering\\
+        Oklahoma State University\\
+        Stilwlater, Oklahoma\\
+        2020}
+
+\degreetwo{%\ssp Master of Science in Mathematics\\
+%        University Two\\
+%        City, State\\
+%        2012
+}
+
+\degreethree{%\ssp Third Degree\\
+        %Third University\\
+        %City, State\\
+        %2015
+        }
+
+
+\degreesought{MASTER OF SCIENCE}
+ \degreedate{December, 2024}
+\majorfield{ELECTRICAL ENGINEERING}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\begin{document}
+
+\maketitle
+%\makecopyright
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Put your advisor's and the committee members' names here:
+\makeapproval{Dr. Sheng}{Dr. Rouser}{Dr. Third Reader}{Dr. Outside Member}
+
+% \begin{acknowledge}
+%  \input{acknowledge}
+% \end{acknowledge}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Fields passed to abstract are:
+% Name, Month and Year of Graduation, Title, Field, and spacing: Use 0in or 1in per GC policy,
+% depending on length of the abstract. A longer abstract will 0in, a shorter abstract 1in.
+
+\begin{abstract}{JOSHUA DRAKE}
+{DECEMBER 2024}
+	{EXPERIMENTAL EVALUATION OF TRANSIENT AND STEADY-STATE CHARACTERISTICS OF A 180KW TURBOELECTRIC-AIRCRAFT TESTRIG}
+{ELECTRICAL ENGINEERING}
+{60pt}
+   \input{abstract}
+\end{abstract}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\renewcommand{\listfigurename}{LIST OF FIGURES}
+\renewcommand{\listtablename}{LIST OF TABLES}
+
+{\addtocontents{toc}{\protect\renewcommand{\protect\cftchapleader} {\protect\cftdotfill{\cftsecdotsep}}} %<-adds leaders at the chapter level \addtocontents{toc}{~{\kern-0.3in Chapter}\hfill{Page}\par} %<-this line deals with the first toc page \fancypagestyle{fancyplain}{ %
+ \lhead{ \fancyplain{}{Chapter} }
+ \rhead{ \fancyplain{}{Page} }
+ \renewcommand{\headrulewidth}{0pt} % remove lines which fancyhdr usually uses
+ \renewcommand{\footrulewidth}{0pt}
+}
+
+{\changepage{-29.43001pt}{}{}{}{}{}{15pt}{12pt}{}
+\pagestyle{fancyplain}
+\thispagestyle{plain}
+\tableofcontents
+}
+
+\renewcommand{\cftfigaftersnum}{.}
+\renewcommand{\cfttabaftersnum}{.}
+
+%%% Generate the list of tables
+\fancypagestyle{fancyplain}{ %
+ \lhead{ \fancyplain{}{Table} }
+ \rhead{ \fancyplain{}{Page} }
+ \renewcommand{\headrulewidth}{0pt} % remove lines as well
+ \renewcommand{\footrulewidth}{0pt}
+}
+\changepage{-29.43001pt}{}{}{}{}{}{15pt}{12pt}{}
+\pagestyle{fancyplain}\renewcommand{\thepage}{\roman{page}}
+\thispagestyle{plain}\renewcommand{\thepage}{\roman{page}}
+\ssp
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Comment this line out if you do not want a List of Tables:
+\listoftables
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+%%% Generate the list of figures
+\fancypagestyle{fancyplain}{ %
+ \lhead{ \fancyplain{}{Figure} }
+ \rhead{ \fancyplain{}{Page} }
+ \renewcommand{\headrulewidth}{0pt} % remove lines as well
+ \renewcommand{\footrulewidth}{0pt}
+}
+\pagestyle{fancyplain}\renewcommand{\thepage}{\roman{page}}
+\thispagestyle{plain}\renewcommand{\thepage}{\roman{page}}
+\ssp
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Comment this line out if you do not want a List of Figures:
+\listoffigures
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\pagestyle{plain}
+
+\changepage{27pt}{}{}{}{}{}{-15pt}{-12pt}{} % Reset headers height to zero and restore textheight
+\dsp
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Optional: uncomment the following lines if you want to include a Nomenclature page,
+% and create TeX file notation.tex to use.
+% \begin{nomenclature}
+%  \input{nomenclature}
+% \end{nomenclature}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Optional: uncomment the following 3 lines if you want to include a list of symbols page
+% \begin{listofsymbols}
+%  \input{listofsymbols}
+% \end{listofsymbols}
+
+\newpage
+\pagenumbering{arabic}\setcounter{page}{1}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% This is where you will put your thesis chapters files. You do not need to
+% include the .tex extension, but this input command is inputing chapter1.tex,
+% etc.
+\input{introduction}
+\input{background}
+\input{methodology}
+\input{results}
+\input{conclusion}
+% Include as many chapters as you would like! Add other lines like the following:
+%\input{anotherchapter}
+%\input{conclusions}
+% But don't forget to make a TeX file for each in the same folder!
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% This template is set up to use BiBTeX data and automatically generate the
+% bibliography based ONLY on what references you cite, so you can have a large
+% bib file and only pull what you need.
+%
+% If, however, you want all references in your BiBTeX file to be listed in the
+% references section, EVEN IF THEY WERE NOT SPECIFICALLY CITED SOMEWHERE IN
+% THE DISSERTATION, then you must uncomment the following line:
+
+\nocite{*}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\input{bibliography}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% NOTICE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% You may comment out the following line if you do not have any appendices:
+\input{appendix}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\input{vita}
+
+\end{document}
diff --git a/img/EoPturbojet.png b/img/EoPturbojet.png
new file mode 100644
index 0000000..86448fe
--- /dev/null
+++ b/img/EoPturbojet.png
diff --git a/img/tp100cutaway.png b/img/tp100cutaway.png
new file mode 100644
index 0000000..3055085
--- /dev/null
+++ b/img/tp100cutaway.png
diff --git a/img/turboseriesparallel.png b/img/turboseriesparallel.png
new file mode 100644
index 0000000..746285b
--- /dev/null
+++ b/img/turboseriesparallel.png
diff --git a/img/turbosystems.png b/img/turbosystems.png
new file mode 100644
index 0000000..b8b9c50
--- /dev/null
+++ b/img/turbosystems.png
diff --git a/introduction.tex b/introduction.tex
new file mode 100644
index 0000000..8344350
--- /dev/null
+++ b/introduction.tex
@@ -0,0 +1,39 @@
+
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter[INTRODUCTION]{INTRODUCTION}\label{chap:intro}
+\endgroup
+
+
+% \begin{figure}
+%  \centering
+%  \includegraphics[width=3in]{pistolpete}
+%  \caption{\label{fig:1-1}Pistol Pete picture}
+% \end{figure}
+
+
+% \begin{table}[!h]
+%   \centering
+%     \begin{tabular}{| l c r |}
+%     \hline
+%     1 & 2 & 3 \\
+%     4 & 5 & 6 \\
+%     7 & 8 & 9 \\
+%     \hline
+%     \end{tabular}
+%   \caption{\label{tab:1}A simple table}
+% \end{table}
+
+% \begin{table}[!h]
+%   \centering
+%     \begin{tabular}{| l c r |}
+%     \hline
+%     1 & 2 & 3 \\
+%     4 & 5 & 6 \\
+%     7 & 8 & 9 \\
+%     \hline
+%     \end{tabular}
+%   \caption{A second table}
+% \end{table}
diff --git a/methodology.tex b/methodology.tex
new file mode 100644
index 0000000..b6c8231
--- /dev/null
+++ b/methodology.tex
@@ -0,0 +1,14 @@
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter[METHODOLOGY]{METHODOLOGY}
+\endgroup
+
+\section{General Aircraft System}
+\section{Configuration One}
+  \subsection{Data Acquisition}
+  \subsection{Experimental Procedure}
+\section{Configuration Two}
+  \subsection{Data Acquisition}
+  \subsection{Experimental Procedure}
\ No newline at end of file
diff --git a/osuthesis.cls b/osuthesis.cls
new file mode 100644
index 0000000..f2e6352
--- /dev/null
+++ b/osuthesis.cls
@@ -0,0 +1,1035 @@
+%%
+%% This file `osuthesis.cls' was originally adapted from `report.cls'.
+%%
+%%
+%% Copyright (C) 1999, 2005, 2020
+%% Oklahoma State University
+%%
+%% Original author: Brian O'Dell
+%% Revised: Ryan T. Ratliff  2005
+%% Revised: Paul Fili, Edward Richmond 2020
+%%
+%% YOU SHOULD NOT NEED TO CHANGE ANYTHING IN THIS FILE DIRECTLY.
+%% SEE THE dissertation_main.tex FILE FOR THE DATA WHICH YOU
+%% NEED TO SUPPLY
+%%
+%% Usage:
+%%      This class file follows the format for theses and dissertations
+%%      of Oklahoma State University.  A sample document template is shown
+%%      below.  For special information (name, degree, etc.) use standard
+%%      capitalization rules except where noted.  IT IS IMPORTANT TO
+%%      MAINTAIN THIS SEQUENCE.  User-supplied information is denoted with
+%%      ``< ... >''.
+%%
+%%              % Sample OSU /Dissertation
+%%
+%%              \documentclass{osuthesis}
+%%
+%%              \title{<TITLE>} % Title in ALL CAPS
+%%              \formattedtitle{<TITLE>} % Same as \title, but with line
+%%                                       % breaks to obtain the inverted
+%%                                       % pyramid shape required for
+%%                                       % title and approval pages
+%%              \author{<AUTHOR>} % Author in ALL CAPS
+%%
+%%              % Earned degree(s)
+%%              \degreeone{%
+%%                <Degree>\\%
+%%                <Institution>\\%
+%%                <City>, <State/Country>\\%
+%%                <Year>}
+%%              \degreeone{%
+%%                <Degree>\\%
+%%                <Institution>\\%
+%%                <City>, <State/Country>\\%
+%%                <Year>} % (If applicable)
+%%
+%%              % Current degree information
+%%              \degreesought{<DEGREE>} % Degree in ALL CAPS
+%%              \degreedate{<Month>, <Year>}
+%%              \majorfield{<Field>}
+%%
+%%              \begin{document}
+%%
+%%              \bibliographystyle{plain}  % Several styles available,
+%%                                         % check with your department
+%%
+%%              % FOREMATTER
+%%              \maketitle        % Creates title page.
+%%              \makeapproval{5}  % Creates spproval page.  The argument
+%%                                % (the numeral 4,5, or 6) is the number of
+%%                                % signatures required (Remember to add one
+%%                                % for the Dean of the Graduate College.)
+%%
+%%              \begin{preface}   % Creates Preface page (OPTIONAL)
+%%                <Preface text here.>
+%%              \end{preface}
+%%
+%%              \begin{acknowledge}  % Creates Acknowledgments
+%%                                   % page (OPTIONAL)
+%%                <Acknowledgment text here.>
+%%              \end{acknowledge}
+%%
+%%              \tableofcontents  % Creates table of contents
+%%              \listoffigures    % Creates list of figures (IF APPLICABLE)
+%%              \listoftables     % Creates list of tables (IF APPLICABLE)
+%%
+%%              % BODY OF THESIS
+%%              <Text>  % (Recommend storing text in separate *.tex file, then
+%%                      % including with \include{<filename>}.)
+%%
+%%              % BIBLIOGRAPHY
+%%              \bibliography{<*.bib file(s)>}
+%%
+%%              % APPENDICES
+%%              \appendix
+%%              <Text>  % (Recommend storing text in separate *.tex file, then
+%%                      % including with \include{<filename>}.)
+%%
+%%              % MISCELLANEOUS
+%%              \begin{vita}{<Name>}{<Degree>}{<Field>} % Creates vita
+%%                \vitaitem{Personal Data:} <Text> % OPTIONAL
+%%                \vitaitem{Education:} <Text> Completed the requirements
+%%                  for the <Degree> degree with a major in <Field> at
+%%                  Oklahoma State University in <Month>, <Year>.
+%%                \vitaitem{Experience:} <Text>
+%%                \vitaitem{Professional Memberships:} <Text>
+%%              \end{vita}
+%%
+%%              \begin{abstract}{<Name>}{<Degree>}{<Field>} % Creates abstract
+%%                <Text> % (350 word maximum)
+%%              \end{abstract}
+%%
+%%              \end{document}
+%%
+%%
+%% Notes:
+%%   1) A proof environment is defined in this file.  It must be removed
+%%      if an included package (e.g., amsmath) also defines this environment
+%%      or an error will result.
+%%   2) Theorem-like environments are defined (using the environment name
+%%      in parenthesis) for Theorem (theorem), Lemma (lemma),
+%%      Corollary (corollary), Problem (problem), Definition (definition),
+%%      Assumption (assumption), Example (example), and Remark (remark).
+%%   3) Remember that the abstract must be submitted separately from the
+%%      thesis, and that six copies must be submitted.
+%%   4) Remember to include two blank pages before the title page and after
+%%      the vita.
+%%
+%%
+%% This file requires LaTeX2e.
+%% -------------------------------------------------
+%%
+%%
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+%%
+
+
+\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\ProvidesClass{osuthesis}
+              [2020/02/04 v2.0
+ Oklahoma State University Thesis/Dissertation document class]
+\newcommand\@ptsize{}
+\newif\if@restonecol
+\newif\if@titlepage
+\@titlepagetrue
+\newif\if@openright
+\DeclareOption{letterpaper}
+   {\setlength\paperheight {11in}%
+    \setlength\paperwidth  {8.5in}}
+\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
+\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
+\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
+\DeclareOption{draft}{\setlength\overfullrule{5pt}}
+\DeclareOption{final}{\setlength\overfullrule{0pt}}
+\DeclareOption{openright}{\@openrighttrue}
+\DeclareOption{openany}{\@openrightfalse}
+\DeclareOption{onecolumn}{\@twocolumnfalse}
+\DeclareOption{openbib}{%
+  \AtEndOfPackage{%
+   \renewcommand\@openbib@code{%
+      \advance\leftmargin\bibindent
+      \itemindent -\bibindent
+      \listparindent \itemindent
+      \parsep \z@
+      }%
+   \renewcommand\newblock{\par}}%
+}
+\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final,openany}
+\ProcessOptions
+
+\input{size1\@ptsize.clo}
+\setlength\lineskip{1\p@}
+\setlength\normallineskip{1\p@}
+\renewcommand\baselinestretch{}
+\setlength\parskip{0\p@ \@plus \p@}
+\@lowpenalty   51
+\@medpenalty  151
+\@highpenalty 301
+
+\setcounter{topnumber}{2}
+\renewcommand\topfraction{.7}
+\setcounter{bottomnumber}{1}
+\renewcommand\bottomfraction{.3}
+\setcounter{totalnumber}{3}
+\renewcommand\textfraction{.2}
+\renewcommand\floatpagefraction{.5}
+\setcounter{dbltopnumber}{2}
+\renewcommand\dbltopfraction{.7}
+\renewcommand\dblfloatpagefraction{.5}
+
+
+% ********************************************************
+% **************** SPECIAL DECLARATIONS ******************
+% ********************************************************
+
+% Theorem-like environments defined at end of this document.
+
+% Define single- and double-space environments.
+\def\ssp{\def\baselinestretch{1.0}\large\normalsize}
+\def\msp{\def\baselinestretch{1.3}\large\normalsize}
+\def\dsp{\def\baselinestretch{1.67}\large\normalsize}
+
+% The formatted title
+\def\formattedtitle#1{\gdef\@formattedtitle{#1}}
+
+% The full (unabbreviated) name of the degree
+\def\degreesought#1{\gdef\@degreesought{#1}}
+
+% The year the degree will be officially conferred
+\def\degreedate#1{\gdef\@degreedate{#1}}
+
+% The name of your degree's field (e.g. Economics, Computer Science)
+\def\majorfield#1{\gdef\@majorfield{#1}}
+
+% Previous degrees
+\newif\if@onedegree
+\@onedegreetrue
+\def\degreeone#1{\gdef\@degreeone{#1}}
+\def\degreetwo#1{\gdef\@degreetwo{#1}\@onedegreefalse}
+\def\degreethree#1{\gdef\@degreethree{#1}\@onedegreefalse}
+
+% Commands for proof environment (adapted from amsgen.sty & amsthm.sty)%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\DeclareRobustCommand{\qed}{%
+ \ifmmode % if math mode, assume display: omit penalty etc.
+  \else \leavevmode\unskip\penalty9999 \hbox{}\nobreak\hfill
+  \fi
+  \quad\hbox{\qedsymbol}}
+\newcommand{\openbox}{\leavevmode
+  \hbox to.77778em{%
+  \hfil\vrule
+  \vbox to.675em{\hrule width.6em\vfil\hrule}%
+  \vrule\hfil}}
+\newcommand{\qedsymbol}{{\mbox{\rule[0pt]{1.5ex}{1.5ex}}}}
+
+%%%%the following is the modified proof environment from the university%%%%%%%%%%%%
+%\newenvironment{proof}{%
+  %\par\normalfont\topsep12pt%
+   %\trivlist
+     % \item[\hskip\labelsep\itshape Proof.]\ignorespaces
+  %}{%
+ % %\qed\endtrivlist}
+  %$\Box$\endtrivlist}%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ %%%%%%%this is the proof environment I copied from amsthm package and it works better%%%%%%%%%%%%%%%%%%%%%
+  \newenvironment{proof}[1][\proofname]{\par
+  \normalfont
+  \topsep6\p@\@plus6\p@ \trivlist
+  \item[\hskip\labelsep\itshape
+    #1.]\ignorespaces
+}{%
+  \qed\endtrivlist %%this ending symbol is a solid black box
+ % $\Box$\endtrivlist %%change the ending symbol from a solid black box to an empty box
+}
+\newcommand{\proofname}{Proof}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Define a placeholder counter for roman-numbered pages.
+\newcounter{placeholder}
+
+% Define inverted pyramid title paragraph shape
+\newcommand{\invertedpyramid}{\parshape=3 0in 4in 0.25in 3.5in 0.5in 3in}
+
+% ********************************************************
+% ********************************************************
+
+
+% ********************************************************
+% ****************** PAGE FORMATTING *********************
+% ********************************************************
+
+\dsp   % Use double spacing for text
+
+\newfont{\ninerm}{cmr9}
+\newfont{\tenrm}{cmr10}
+
+\setlength{\voffset}{0in}
+\setlength{\hoffset}{0in}
+\setlength{\topmargin}{0in}
+\setlength{\headheight}{0pt} % 12pt}
+\setlength{\headsep}{0pt} % 12pt}
+\setlength{\textwidth}{6in}
+\setlength{\textheight}{9in} % 624pt} % = 9in - 24 pts for heightheight and sep = 624 pts (72 pt = 1 in)
+\setlength{\oddsidemargin}{0.3125in} % adds to nominal 1in margin
+\setlength{\footskip}{36pt}  % 0.5in
+
+\newlength{\titlewidth} % defines width for title page text
+\setlength{\titlewidth}{4in}
+\newlength{\widertitlewidth} % defines wider width for title page text
+\setlength{\widertitlewidth}{5in}
+
+\setlength{\marginparsep}{0in}
+\setlength{\marginparwidth}{0in}
+
+\newlength{\mylengtha}  % Used in formatting vita and abstract
+\newlength{\mylengthb}
+
+% ********************************************************
+% ********************************************************
+
+
+% ********************************************************
+% ********************  TITLE PAGE  **********************(no page number, put it at the very beginning of the thesis)
+% ********************************************************
+
+\newcommand{\maketitle}% Create coverpage layout.
+  {\newpage \setlength{\partopsep}{0in} \setlength{\topskip}{0in}
+   \thispagestyle{empty}
+    \setcounter{page}{1}
+   \renewcommand{\thepage}{\roman{page}}
+   \begin{center}\ssp
+     \vspace*{1in}\par
+     \parbox{\widertitlewidth}{\centering \dsp \@formattedtitle}
+     \par\vfill\par
+     \if@onedegree
+       \parbox{\titlewidth}{\centering \dsp By \par \@author %
+               \@degreeone \par \ssp}
+     \else
+       \parbox{\widertitlewidth}{\centering \dsp By \linebreak\linebreak %
+       \@author \linebreak\linebreak %
+       \@degreeone \linebreak\linebreak %
+       \@degreetwo \linebreak\linebreak %
+       \@degreethree}
+     \fi
+     \par\vfill\par
+     Submitted to the Faculty of the\\
+     Graduate College of the\\
+     Oklahoma State University\\
+     in partial fulfillment of\\
+     the requirements for\\
+     the Degree of\\
+     \@degreesought\\
+     \@degreedate
+   \end{center}
+   \par\ssp\vspace*{0.875in}\par\dsp% 2 inch nominal bottom margin
+   \newpage
+   \renewcommand{\thepage}{\arabic{page}}
+   }
+
+% \maketitle outputs the complete titlepage.
+
+% ********************************************************
+% ********************************************************
+
+
+% ********************************************************
+% ******************  COPYRIGHT PAGE  ******************** 
+% (not needed on and after May 2016)
+% ********************************************************
+
+%\newcommand{\makecopyright}% Create coverpage layout.
+  %{\newpage
+   %\thispagestyle{empty}
+   %\renewcommand{\thepage}{\roman{page}}
+   %\vspace*{\fill}\par
+   %\begin{center}\dsp
+    % COPYRIGHT \copyright\\
+     %By\\
+     %\@author\\
+     %\@degreedate
+   %\end{center}
+   %\par\vspace*{\fill}\dsp
+   %\newpage
+   %\renewcommand{\thepage}{\arabic{page}}
+   %}
+
+% \maketitle outputs the complete titlepage.
+
+% ********************************************************
+% ********************************************************
+
+% ********************************************************
+% *******************  APPROVAL PAGE  ********************
+% (no need to put the dean of the graduate college for May 2016)
+% ********************************************************
+\newcommand{\makeapproval}[4]% Create approval page layout.
+  {\newpage \setlength{\partopsep}{0in} \setlength{\topskip}{0in}
+   \renewcommand{\thepage}{\roman{page}}
+   \begin{center}\msp  % \msp adjusts the spacing between lines
+     \vspace*{1in}\par
+     \parbox{\widertitlewidth}{\centering \dsp \@formattedtitle}
+
+ \mbox{} \\ \vspace{2cm}
+
+     \parbox{\titlewidth}{Thesis Approved:}\par
+
+
+       \parbox{\titlewidth}{\centering %
+         \begin{tabular}{@{}c@{}}
+         % Remove names if creating signature page
+           \rule{\titlewidth}{0in} \\ \mbox{} \\ \mbox{} \\%\mbox{Dissertation Advisors Name Here} \\
+           \mbox{#1} \\
+           \hline  % Sets width of sig. lines
+           \mbox{Thesis Advisor} \\
+           \mbox{} \\ \mbox{} \\ \mbox{} \\
+
+           \mbox{#2} \\
+           \hline
+           \mbox{} \\ \mbox{} \\ \mbox{} \\
+
+           \mbox{#3} \\
+           \hline
+           \mbox{} \\ \mbox{} \\ \mbox{} \\
+
+           \mbox{#4} \\
+           \hline
+           \mbox{} \\ \mbox{} \\ \mbox{} \\
+
+           %{\ssp Dean of the Graduate College}
+         \end{tabular}}
+     \end{center}
+  %\par\ssp\vspace*{1.8125in}\par\dsp% 4 inch nominal bottom margin
+  \newpage
+  \renewcommand{\thepage}{\arabic{page}}
+  }
+% \makeapproval outputs the complete approval page
+
+% ********************************************************
+% ********************************************************
+
+% ********************************************************
+% ***************  PREFACE PAGE  ****************(did not use)
+% ********************************************************
+
+\newenvironment{preface}
+  {\renewcommand{\thepage}{\roman{page}}
+    {\centering \ssp \rule{0in}{68pt} \par
+       PREFACE \par
+       \vspace*{0.25in} \par \dsp}
+  }
+  {\newpage\renewcommand{\thepage}{\arabic{page}}}
+
+% ********************************************************
+% ********************************************************
+
+
+% ********************************************************
+% ***************  ACKNOWLEDGMENTS PAGE  ****************(optional for May 2016)
+% ********************************************************
+
+\newenvironment{acknowledge}
+  {\newpage \renewcommand{\thepage}{\roman{page}}
+  \makeatletter
+\def\blfootnote{\xdef\@thefnmark{}\@footnotetext}
+\makeatother
+
+     {\centering \ssp \rule{0in}{68pt} \par
+        ACKNOWLEDGMENTS\blfootnote{Acknowledgments reflect the views of the author and are not endorsed
+by committee members or Oklahoma State University.}
+
+ \par
+        \vspace*{0.25in} \par \dsp}
+  }
+  {\newpage\renewcommand{\thepage}{\arabic{page}}}
+
+% ********************************************************
+%*****************************Nomenclature
+% ********************************************************
+\newenvironment{nomenclature}
+  {\newpage \renewcommand{\thepage}{\roman{page}}
+     {\centering \ssp \rule{0in}{68pt} \par
+        NOMENCLATURE \par
+        \vspace*{0.25in} \par \dsp}
+  }
+  {}%\newpage\renewcommand{\thepage}{\arabic{page}}}
+
+\newenvironment{listofsymbols}
+  {\newpage \renewcommand{\thepage}{\roman{page}}
+     {\centering \ssp \rule{0in}{68pt} \par
+        LIST OF SYMBOLS \par
+        \vspace*{0.25in} \par \dsp}
+  }
+  {}%\newpage\renewcommand{\thepage}{\arabic{page}}}
+  
+% ********************************************************
+% *******************  ABSTRACT PAGE  ********************
+% ********************************************************
+\newenvironment{abstract}[5]{
+        \newpage \vspace*{#5}\renewcommand{\thepage}{\roman{page}}
+        {\dsp \parindent=0in
+        Name:~~#1  \par 
+
+        Date of Degree:~~#2  
+        
+        \par \settowidth{\mylengtha}{Title of Study:~~}
+        \setlength{\mylengthb}{\textwidth}
+        \addtolength{\mylengthb}{-\mylengtha}
+        \mbox{Title of Study:~~\parbox[t]{\mylengthb}{\ssp \MakeUppercase{\@title} \par\null}}
+
+
+        % \settowidth{\mylengtha}{Title of Study:~~}
+        % \setlength{\mylengthb}{\textwidth}
+        % \addtolength{\mylengthb}{-\mylengtha}
+        % \mbox{Title of Study:~~#3}
+           \par
+        %
+        Major Field:~~#4 \par
+
+        } \ssp \parindent=0in \parskip=1em
+        Abstract:   }
+        %{\par \parskip=0in \vfill \par ADVISOR'S APPROVAL:~~\hrulefill}
+ {\newpage\renewcommand{\thepage}{\arabic{page}}}
+\newcommand{\abstractitem}[1]{\par \hangindent=0.375in \hangafter=1 \parindent=0in #1~}
+
+% ********************************************************
+% ********************************************************
+
+
+
+% ********************************************************
+% *********************  VITA PAGE  **********************(no page number, put it at the very end of the thesis)
+% ********************************************************
+
+\newenvironment{vita}[3]{%
+        \newpage
+        \addtocounter{page}{-1}
+        \thispagestyle{empty}
+        {\dsp \parindent=0in
+          \vspace*{1in} \par
+         \hspace*{-0.25in} \parbox{\textwidth}{\centering \dsp VITA \par
+          #1 \par
+          Candidate for the Degree of \par
+          #2 \par}
+        \par\rule{0in}{0.5in}\par
+        %
+        \settowidth{\mylengtha}{Thesis:~~}
+        \setlength{\mylengthb}{\textwidth}
+        \addtolength{\mylengthb}{-\mylengtha}
+        \mbox{Thesis:~~\parbox[t]{\mylengthb}{\ssp \MakeUppercase{\@title} \par\null}}
+           \par
+        %
+        Major Field:~~#3 \par
+        Biographical: \par
+        } \ssp  \parskip=1em
+        }
+        {\par \parskip=0in}
+
+%\newcommand{\vitaitem}[1]{\par \hangindent=0.75in %%if we want the content of Education indented.
+  % \hangafter=1 \parindent=0.375in #1~}
+
+\newcommand{\vitaitem}[1]{\par \hangindent=0.375in %%No indent on the row for Education and the content of Education.
+   \hangafter=1 \parindent=0.375in #1~}
+
+
+\newcommand{\abitem}[1]{\par \hangindent=0.375in %
+     \hangafter=1 \parindent=0.0in #1~}
+
+% ********************************************************
+% ********************************************************
+
+\newcommand*\chaptermark[1]{}
+\setcounter{secnumdepth}{2}
+\newcounter {part}
+\newcounter {chapter}
+\newcounter {section}[chapter]
+\newcounter {subsection}[section]
+\newcounter {subsubsection}[subsection]
+\newcounter {paragraph}[subsubsection]
+\newcounter {subparagraph}[paragraph]
+\renewcommand \thepart {\@Roman\c@part}
+\renewcommand \thechapter {\@Roman\c@chapter}
+% To preserve roman numerals in subsections, use the command
+%\renewcommand \thesection {\thechapter.\@arabic\c@section}
+% instead of the command below:
+\renewcommand \thesection {\@arabic\c@chapter.\@arabic\c@section}
+\renewcommand \thesubsection   {\thesection.\@arabic\c@subsection}
+\renewcommand \thesubsubsection{\thesubsection .\@arabic\c@subsubsection}
+\renewcommand \theparagraph    {\thesubsubsection.\@arabic\c@paragraph}
+\renewcommand \thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
+\newcommand\@chapapp{\chaptername}
+\newcommand\part{%
+  \if@openright
+    \cleardoublepage
+  \else
+    \clearpage
+  \fi
+  \thispagestyle{plain}%
+  \if@twocolumn
+    \onecolumn
+    \@tempswatrue
+  \else
+    \@tempswafalse
+  \fi
+  \null\vfil
+  \secdef\@part\@spart}
+
+\def\@part[#1]#2{%
+    \ifnum \c@secnumdepth >-2\relax
+      \refstepcounter{part}%
+      \addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
+    \else
+      \addcontentsline{toc}{part}{#1}%
+    \fi
+    \markboth{}{}%
+    {\centering
+     \interlinepenalty \@M
+     \normalfont
+     \ifnum \c@secnumdepth >-2\relax
+       \huge\bfseries \partname~\thepart
+       \par
+       \vskip 20\p@
+     \fi
+     \Huge \bfseries #2\par}%
+    \@endpart}
+\def\@spart#1{%
+    {\centering
+     \interlinepenalty \@M
+     \normalfont
+     \Huge \bfseries #1\par}%
+    \@endpart}
+\def\@endpart{\vfil\newpage
+              \if@twoside
+                \null
+                \thispagestyle{empty}%
+                \newpage
+              \fi
+              \if@tempswa
+                \twocolumn
+              \fi}
+\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi
+                    \thispagestyle{plain}%
+                    \global\@topnum\z@
+                    \@afterindentfalse
+                    \secdef\@chapter\@schapter
+                    }
+\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
+                         \refstepcounter{chapter}%
+                         \typeout{\@chapapp\space\thechapter.}%
+                         \addcontentsline{toc}{chapter}%
+                                   {\protect\numberline{\thechapter}#1}%
+                    \else
+                      \addcontentsline{toc}{chapter}{#1}%
+                    \fi
+                    \chaptermark{#1}%
+                    \addtocontents{lof}{\protect\addvspace{10\p@}}%
+                    \addtocontents{lot}{\protect\addvspace{10\p@}}%
+                    \if@twocolumn
+                      \@topnewpage[\@makechapterhead{#2}]%
+                    \else
+                      \@makechapterhead{\centering#2}%
+                      \@afterheading
+                    \fi}
+\def\@makechapterhead#1{%                                        %--------------------------Chapter Head
+  \vspace*{72\p@}%
+  {\parindent \z@ \raggedright \centering \normalfont
+    \ifnum \c@secnumdepth >\m@ne
+        \bfseries \@chapapp\space \thechapter
+        \par\nobreak
+        \vskip 15\p@
+    \fi
+    \interlinepenalty\@M
+     \bfseries #1\par\nobreak
+    \vskip 15\p@
+  }}
+\def\@schapter#1{\if@twocolumn
+                   \@topnewpage[\@makeschapterhead{#1}]%
+                 \else
+                   \@makeschapterhead{#1}%
+                   \@afterheading
+                 \fi}
+\def\@makeschapterhead#1{%
+  \vspace*{72\p@}%
+  {\parindent \z@ \raggedright
+    \normalfont
+    \interlinepenalty\@M
+     \bfseries  #1\par\nobreak
+    \vskip 15\p@                                                           %---------------------------------Section Def
+  }}
+\newcommand\section{\@startsection{section}{1}{\z@}%
+                                   {-3.5ex \@plus -1ex \@minus -.2ex}%
+                                   {2.3ex \@plus.2ex}%
+                                   {\begin{center}\normalfont\bfseries}}
+\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
+                                     {-3.25ex\@plus -1ex \@minus -.2ex}%
+                                     {1.5ex \@plus .2ex}%
+                                     {\normalfont\normalfont\bfseries}}
+\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
+                                     {-3.25ex\@plus -1ex \@minus -.2ex}%
+                                     {1.5ex \@plus .2ex}%
+                                     {\normalfont\normalfont\bfseries}}
+\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
+                                    {3.25ex \@plus1ex \@minus.2ex}%
+                                    {-1em}%
+                                    {\normalfont\normalsize\bfseries}}
+\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
+                                       {3.25ex \@plus1ex \@minus .2ex}%
+                                       {-1em}%
+                                      {\normalfont\normalsize\bfseries}}
+\if@twocolumn
+  \setlength\leftmargini  {2em}
+\else
+  \setlength\leftmargini  {2.5em}
+\fi
+\leftmargin  \leftmargini
+\setlength\leftmarginii  {2.2em}
+\setlength\leftmarginiii {1.87em}
+\setlength\leftmarginiv  {1.7em}
+\if@twocolumn
+  \setlength\leftmarginv  {.5em}
+  \setlength\leftmarginvi {.5em}
+\else
+  \setlength\leftmarginv  {1em}
+  \setlength\leftmarginvi {1em}
+\fi
+\setlength  \labelsep  {.5em}
+\setlength  \labelwidth{\leftmargini}
+\addtolength\labelwidth{-\labelsep}
+\@beginparpenalty -\@lowpenalty
+\@endparpenalty   -\@lowpenalty
+\@itempenalty     -\@lowpenalty
+\renewcommand\theenumi{\@arabic\c@enumi}
+\renewcommand\theenumii{\@alph\c@enumii}
+\renewcommand\theenumiii{\@roman\c@enumiii}
+\renewcommand\theenumiv{\@Alph\c@enumiv}
+\newcommand\labelenumi{\theenumi.}
+\newcommand\labelenumii{(\theenumii)}
+\newcommand\labelenumiii{\theenumiii.}
+\newcommand\labelenumiv{\theenumiv.}
+\renewcommand\p@enumii{\theenumi}
+\renewcommand\p@enumiii{\theenumi(\theenumii)}
+\renewcommand\p@enumiv{\p@enumiii\theenumiii}
+\newcommand\labelitemi{\textbullet}
+\newcommand\labelitemii{\normalfont\bfseries \textendash}
+\newcommand\labelitemiii{\textasteriskcentered}
+\newcommand\labelitemiv{\textperiodcentered}
+\newenvironment{description}
+               {\list{}{\labelwidth\z@ \itemindent-\leftmargin
+                        \let\makelabel\descriptionlabel}}
+               {\endlist}
+\newcommand*\descriptionlabel[1]{\hspace\labelsep
+                                \normalfont\bfseries #1}
+\newenvironment{verse}
+               {\let\\\@centercr
+                \list{}{\itemsep      \z@
+                        \itemindent   -1.5em%
+                        \listparindent\itemindent
+                        \rightmargin  \leftmargin
+                        \advance\leftmargin 1.5em}%
+                \item\relax}
+               {\endlist}
+\newenvironment{quotation}
+               {\list{}{\listparindent 1.5em%
+                        \itemindent    \listparindent
+                        \rightmargin   \leftmargin
+                        \parsep        \z@ \@plus\p@}%
+                \item\relax}
+               {\endlist}
+\newenvironment{quote}
+               {\list{}{\rightmargin\leftmargin}%
+                \item\relax}
+               {\endlist}
+
+\newcommand\appendix{\par
+  \setcounter{chapter}{0}%
+  \setcounter{section}{0}%
+  \renewcommand\@chapapp{\appendixname}%
+  \renewcommand\thechapter{\@Alph\c@chapter}}
+\setlength\arraycolsep{5\p@}
+\setlength\tabcolsep{6\p@}
+\setlength\arrayrulewidth{.4\p@}
+\setlength\doublerulesep{2\p@}
+\setlength\tabbingsep{\labelsep}
+\skip\@mpfootins = \skip\footins
+\setlength\fboxsep{3\p@}
+\setlength\fboxrule{.4\p@}
+\@addtoreset {equation}{chapter}
+\renewcommand\theequation
+  {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@equation}
+\newcounter{figure}[chapter]
+\renewcommand \thefigure
+     {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@figure}
+\def\fps@figure{tbp}
+\def\ftype@figure{1}
+\def\ext@figure{lof}
+\def\fnum@figure{\figurename~\thefigure}
+\newenvironment{figure}
+               {\@float{figure}}
+               {\end@float}
+\newenvironment{figure*}
+               {\@dblfloat{figure}}
+               {\end@dblfloat}
+\newcounter{table}[chapter]
+\renewcommand \thetable
+     {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@table}
+\def\fps@table{tbp}
+\def\ftype@table{2}
+\def\ext@table{lot}
+\def\fnum@table{\tablename~\thetable}
+\newenvironment{table}
+               {\@float{table}}
+               {\end@float}
+\newenvironment{table*}
+               {\@dblfloat{table}}
+               {\end@dblfloat}
+\newlength\abovecaptionskip
+\newlength\belowcaptionskip
+\setlength\abovecaptionskip{5\p@}
+\setlength\belowcaptionskip{0\p@}
+\long\def\@makecaption#1#2{%
+  \vskip\abovecaptionskip
+  \sbox\@tempboxa{#1: #2}%
+  \ifdim \wd\@tempboxa >\hsize
+    #1: #2\par
+  \else
+    \global \@minipagefalse
+    \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
+  \fi
+  \vskip\belowcaptionskip}
+\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
+\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
+\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
+\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
+\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
+\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
+\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
+\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
+\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
+\newcommand\@pnumwidth{1.55em}
+\newcommand\@tocrmarg{2.55em}
+\newcommand\@dotsep{1}
+\setcounter{tocdepth}{2}
+
+% ********************************************************
+% **************  TABLE OF CONTENTS PAGE  **************** %----------------------------------------------------------
+% ********************************************************
+
+\newcommand\tableofcontents{%
+    \if@twocolumn
+      \@restonecoltrue\onecolumn
+    \else
+      \@restonecolfalse
+    \fi
+    \newpage
+    % Note here we need one more inch, with header, we have 12 + 15 = 27 points
+    % we've use for the header, now we need 72 - 27 = 45 pts, so we add that
+    % via a \rule command, in TOC, LOT, and LOF's
+    {\centering \ssp \rule{0in}{45pt} \par
+       \osucontentsname \par \dsp}
+    \renewcommand{\thepage}{\roman{page}} %\par
+    %}
+    \@starttoc{toc}
+    \newpage
+    %\setcounter{placeholder}{\value{page}}
+    %\pagenumbering{arabic}   % resets page counter to 1, arabic format
+    }
+% ********************************************************
+% ********************************************************
+
+\newcommand*\l@part[2]{%
+  \ifnum \c@tocdepth >-2\relax
+    \addpenalty{-\@highpenalty}%
+    \addvspace{2.25em \@plus\p@}%
+    \begingroup
+      \setlength\@tempdima{3em}%
+      \parindent \z@ \rightskip \@pnumwidth
+      \parfillskip -\@pnumwidth
+      {\leavevmode
+       \large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
+       \nobreak
+         \global\@nobreaktrue
+         \everypar{\global\@nobreakfalse\everypar{}}%
+    \endgroup
+  \fi}
+\newcommand*\l@chapter[2]{%
+  \ifnum \c@tocdepth >\m@ne
+    \addpenalty{-\@highpenalty}%
+    \vskip 1.0em \@plus\p@
+    \setlength\@tempdima{1.5em}%
+    \begingroup
+      \parindent \z@ \rightskip \@pnumwidth
+      \parfillskip -\@pnumwidth
+      \leavevmode \bfseries
+      \advance\leftskip\@tempdima
+      \hskip -\leftskip
+      #1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
+      \penalty\@highpenalty
+    \endgroup
+  \fi}
+
+  \newcommand*\l@page[2]{%
+  \par \dsp
+       \cname \hfill \pname
+       \par \dsp
+  \fi}
+\newcommand*\l@section{\@dottedtocline{1}{1.5em}{2.3em}}
+\newcommand*\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
+\newcommand*\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
+\newcommand*\l@paragraph{\@dottedtocline{4}{10em}{5em}}
+\newcommand*\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
+\newcommand*\l@figure{\@dottedtocline{1}{2.5em}{4em}}
+\let\l@table\l@figure
+
+\newcommand\listoffigures{%
+    \if@twocolumn
+      \@restonecoltrue\onecolumn
+    \else
+      \@restonecolfalse
+    \fi
+    \newpage
+    {\centering \ssp \rule{0in}{45pt} \par
+       \listfigurename \par
+       \fname \hfill \pname
+       \rule{0in}{0.25in} \par \ssp} % \dsp}
+    %\renewcommand{\thepage}{\roman{page}}
+    %\setcounter{page}{\value{placeholder}}
+    \@starttoc{lof} \newpage
+    %\setcounter{placeholder}{\value{page}}
+    %\pagenumbering{arabic}
+    }
+\newcommand\listoftables{%
+    \if@twocolumn
+      \@restonecoltrue\onecolumn
+    \else
+      \@restonecolfalse
+    \fi
+    {\centering \ssp \rule{0in}{45pt} \par
+       \listtablename \par
+       \tname \hfill \pname
+       \rule{0in}{0.25in} \par \dsp}
+    %\renewcommand{\thepage}{\roman{page}}
+    %\setcounter{page}{\value{placeholder}}
+    \@starttoc{lot} \newpage
+    %\setcounter{placeholder}{\value{page}}
+    %\pagenumbering{arabic}
+%\renewcommand{\thepage}{\arabic{page}}
+    }
+
+\newdimen\bibindent
+\setlength\bibindent{1.5em}
+\newenvironment{thebibliography}[1]
+     {\chapter*{\centerline{\bibname}}
+        %\@mkboth{\MakeUppercase\bibname}{\MakeUppercase\bibname}}% %changed to center bib heading
+      \addcontentsline{toc}{chapter}{\bibname}%
+      \list{\@biblabel{\@arabic\c@enumiv}}%
+           {\settowidth\labelwidth{\@biblabel{#1}}%
+            \leftmargin\labelwidth
+            \advance\leftmargin\labelsep
+            \@openbib@code
+            \usecounter{enumiv}%
+            \let\p@enumiv\@empty
+            \renewcommand\theenumiv{\@arabic\c@enumiv}}%
+      \sloppy
+      \clubpenalty4000
+      \@clubpenalty \clubpenalty
+      \widowpenalty4000%
+      \sfcode`\.\@m}
+     {\def\@noitemerr
+       {\@latex@warning{Empty `thebibliography' environment}}%
+      \endlist}
+\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
+\let\@openbib@code\@empty
+\newenvironment{theindex}
+               {\if@twocolumn
+                  \@restonecolfalse
+                \else
+                  \@restonecoltrue
+                \fi
+                \columnseprule \z@
+                \columnsep 35\p@
+                \twocolumn[\@makeschapterhead{\indexname}]%
+                \@mkboth{\MakeUppercase\indexname}%
+                        {\MakeUppercase\indexname}%
+                \thispagestyle{plain}\parindent\z@
+                \parskip\z@ \@plus .3\p@\relax
+                \let\item\@idxitem}
+               {\if@restonecol\onecolumn\else\clearpage\fi}
+\newcommand\@idxitem{\par\hangindent 40\p@}
+\newcommand\subitem{\@idxitem \hspace*{20\p@}}
+\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
+\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
+\renewcommand\footnoterule{%
+  \kern-3\p@
+  \hrule\@width.4\columnwidth
+  \kern2.6\p@}
+\@addtoreset{footnote}{chapter}
+\newcommand\@makefntext[1]{%
+    \parindent 1em%
+    \noindent
+    \hb@xt@1.8em{\hss\@makefnmark}#1}
+\newcommand\osucontentsname{TABLE OF CONTENTS}
+\newcommand\cname{Chapter}
+\newcommand\fname{Figure}
+\newcommand\tname{Table}
+\newcommand\pname{Page}
+\newcommand\listfigurename{LIST OF FIGURES}
+\newcommand\listtablename{LIST OF TABLES}
+\newcommand\bibname{REFERENCES}
+\newcommand\indexname{Index}
+\newcommand\figurename{Figure}
+\newcommand\tablename{Table}
+\newcommand\partname{Part}
+\newcommand\chaptername{CHAPTER}
+\newcommand\appendixname{\centerline{APPENDICES}\global\def\appendixname{APPENDICES}}
+\newcommand\abstractname{Abstract}
+\newcommand\today{}
+\edef\today{\ifcase\month\or
+  January\or February\or March\or April\or May\or June\or
+  July\or August\or September\or October\or November\or December\fi
+  \space\number\day, \number\year}
+\setlength\columnsep{10\p@}
+\setlength\columnseprule{0\p@}
+\pagestyle{plain}
+\pagenumbering{arabic}
+\if@twoside
+\else
+  \raggedbottom
+\fi
+\if@twocolumn
+  \twocolumn
+  \sloppy
+  \flushbottom
+\else
+  \onecolumn
+\fi
+
+% Theorem-like environments (must be defined here for section numbers).
+\newtheorem{theorem}{Theorem}[section]
+\newtheorem{lemma}{Lemma}[section]
+\newtheorem{corollary}{Corollary}[section]
+\newtheorem{proposition}{Proposition}[section]
+\newtheorem{problem}{Problem}[section]
+\newtheorem{definition}{Definition}[section]
+\newtheorem{assumption}{Assumption}[section]
+\newtheorem{example}{Example}[section]
+\newtheorem{remark}{Remark}[section]
+\newtheorem{conjecture}{Conjecture}[section]
+
+\endinput
+%%
+%% End of file `osuthesis.cls'
diff --git a/references.bib b/references.bib
new file mode 100644
index 0000000..19c9c85
--- /dev/null
+++ b/references.bib
@@ -0,0 +1,88 @@
+@phdthesis {MelvinThesis,
+    TYPE = {Master's Thesis},
+    MONTH = {May},
+    AUTHOR = {Melvin, Joshua},
+    TITLE = {INTEGRATION AND EVALUATION OF A 180-KW TURBOPROP ENGINE WITH A TURBOELECTRIC GROUND TEST RIG},
+    SCHOOL = {OKLAHOMA STATE UNIVERSITY},
+    YEAR = {2021},
+    }
+@article {CessnaASME,
+    AUTHOR = {Johnsen, Joshua and Melvin, Joshua and Drake, Joshua and Jdiobe, Muwanika and Rouser, Kurt},
+     TITLE = {Experimental Evaluation of an Electric PowerTrain Designed for a 180-kW Turboelectric Aircraft Ground Test Rig},
+   JOURNAL = {Journal of Engineering for Gas Turbines and Power},
+  FJOURNAL = {ASME Journal of Engineering for Gas Turbines and Power},
+    VOLUME = {146},
+      YEAR = {2024},
+    NUMBER = {},
+     PAGES = {},
+      ISSN = {},
+   MRCLASS = {},
+  MRNUMBER = {},
+MRREVIEWER = {},
+       DOI = {},
+       URL = {},
+}
+@Article{TurboelectricAS,
+AUTHOR = {Burgess, Johnathan and Runnels, Timothy and Johnsen, Joshua and Drake, Joshua and Rouser, Kurt},
+TITLE = {Experimental Comparison of Direct and Active Throttle Control of a 7 kW Turboelectric Power System for Unmanned Aircraft},
+JOURNAL = {Applied Sciences},
+VOLUME = {11},
+YEAR = {2021},
+NUMBER = {22},
+ARTICLE-NUMBER = {10608},
+URL = {https://www.mdpi.com/2076-3417/11/22/10608},
+ISSN = {2076-3417},
+ABSTRACT = {This article compares direct turbine throttle control and active turbine throttle control for a turboelectric system; the featured turboprop is rated for 7 kW of shaft output power. The powerplant is intended for applications in unmanned aerial systems and requires a control system to produce different amounts of power for varying mission legs. The most straightforward control scheme explored is direct turbine control, which is characterized by the pilot controlling the throttle of the turbine engine. In contrast, active control is characterized by the turbine reacting to the power demanded by the electric motors or battery recharge cycle. The transient response to electric loads of a small-scale turboelectric system is essential in identifying and characterizing such a system’s safe operational parameters. This paper directly compares the turbogenerator’s transient behavior to varying electric loads and categorizes its dynamic response. A proportional, integral, and derivative (PID) control algorithm was utilized as an active throttle controller through a microcontroller with battery power augmentation for the turboelectric system. This controller manages the turbine’s throttle reactions in response to any electric load when applied or altered. By comparing the system’s response with and without the controller, the authors provide a method to safely minimize the response time of the active throttle controller for use in the real-world environment of unmanned aircraft.},
+DOI = {10.3390/app112210608}
+}
+@inbook{doi:10.2514/6.2018-4984,
+author = {Cheryl L. Bowman and Ty V. Marien and James L. Felder},
+title = {Turbo- and Hybrid-Electrified Aircraft Propulsion for Commercial Transport},
+booktitle = {2018 AIAA/IEEE Electric Aircraft Technologies Symposium},
+chapter = {},
+pages = {},
+doi = {10.2514/6.2018-4984},
+year = {2018},
+URL = {https://arc.aiaa.org/doi/abs/10.2514/6.2018-4984},
+eprint = {https://arc.aiaa.org/doi/pdf/10.2514/6.2018-4984}
+}
+@article{hybrid_trends,
+author = {Rendón, Manuel and Sánchez, Carlos and Gallo Muñoz, Josselyn and Anzai, Alexandre},
+year = {2021},
+month = {06},
+pages = {},
+title = {Aircraft Hybrid-Electric Propulsion: Development Trends, Challenges and Opportunities (https://rdcu.be/cmG4u)},
+journal = {Sba Controle \& Automação Sociedade Brasileira de Automatica},
+doi = {10.1007/s40313-021-00740-x}
+}
+@inproceedings{nasa_prop_overview,
+	author = {Jansen, Ralph},
+	year = {2017},
+	URL = {https://ntrs.nasa.gov/api/citations/20180000593/downloads/20180000593.pdf},
+	organization = {NASA Glenn Research Center},
+	title = {Overview of NASA Electrified Aircraft Propulsion Activities},
+}
+@manual{tp100technical,
+	year = {2015},
+	month = {April},
+	title = {Basic Technical Information Turboprop Engine TP100},
+	publisher = {PBS Aerospace},
+	number = {PP-63},
+	version = {2},
+	issue = {Second},
+	author = {PBS Aerospace},
+	institution = {PBS Aerospace}
+}
+@inproceedings{nasa_turbojet,
+	author = {NASA},
+	year = {2017},
+	URL = {https://www.grc.nasa.gov/WWW/K-12/airplane/turbth.html},
+	organization = {NASA Glenn Research Center},
+	title = {Turbojet Engine},
+}
+@book{EoPGTR2,
+	title = {Elements of Propulsion: Gas Turbines and Rockets 2nd Edition},
+	year = {2016},
+	author = {Mattingly, Jack and von Obain, Hans},
+	publisher = {AIAA},
+}
diff --git a/results.tex b/results.tex
new file mode 100644
index 0000000..9944c1e
--- /dev/null
+++ b/results.tex
@@ -0,0 +1,10 @@
+\begingroup
+\clearpage% Manually insert \clearpage
+\let\clearpage\relax% Remove \clearpage functionality
+\vspace*{-16pt}% Insert needed vertical retraction
+\chapter[RESULTS]{RESULTS}
+\endgroup
+
+
+\section{Configuration One}
+\section{Configuration Two}
\ No newline at end of file
diff --git a/vita.tex b/vita.tex
new file mode 100644
index 0000000..db7f61a
--- /dev/null
+++ b/vita.tex
@@ -0,0 +1,20 @@
+\newpage
+%%% THE VITA CAN BE ONLY ONE PAGE IN LENGTH
+ \begin{vita}{Joshua Drake}{Master of Science}{Electrical Engineering} %Creates vita
+
+ \vitaitem{Education:} \\
+ \\
+Completed the requirements for the Master of Science in Electrical Engineering at Oklahoma State University, Stillwater,  Oklahoma in 2024.\\
+\\
+Completed the requirements for the Bachelor of Science in Electrical Engineering at Oklahoma State University, Stillwater, Oklahoma in 2020.\\
+
+\vitaitem{Experience:} \\
+\\
+	 Research and Design Engineer The Toro Company 2020-2023 \\
+	 Research and Design Engineer OAIRE Current
+% Include this if needed:
+% \vitaitem{Professional Membership:}\\
+% \\
+% American Mathematical Society, Mathematical Association of America
+
+ \end{vita}