diff options
| -rw-r--r-- | Arduino/main.c/main.c.ino | 23 | ||||
| -rw-r--r-- | SPI.c | 27 | ||||
| -rw-r--r-- | SPI.h | 5 | ||||
| -rw-r--r-- | build/default/production/SPI.o | bin | 13164 -> 13828 bytes | |||
| -rw-r--r-- | build/default/production/main.o | bin | 4092 -> 6460 bytes | |||
| -rw-r--r-- | build/default/production/main.o.d | 7 | ||||
| -rw-r--r-- | build/default/production/mcc_generated_files/interrupt_manager.o | bin | 3540 -> 5452 bytes | |||
| -rw-r--r-- | build/default/production/mcc_generated_files/mssp1_spi.o | bin | 10480 -> 12012 bytes | |||
| -rw-r--r-- | build/default/production/mcc_generated_files/mssp2_i2c.o | bin | 18248 -> 20408 bytes | |||
| -rw-r--r-- | build/default/production/mcc_generated_files/system.o | bin | 6600 -> 6600 bytes | |||
| -rw-r--r-- | build/default/production/mcc_generated_files/system.o.d | 8 | ||||
| -rw-r--r-- | main.c | 39 | ||||
| -rw-r--r-- | nbproject/Makefile-genesis.properties | 4 | ||||
| -rw-r--r-- | nbproject/configurations.xml | 949 | ||||
| -rw-r--r-- | nbproject/private/private.xml | 2 | ||||
| -rw-r--r-- | queuelogs/debugtool | 918 | ||||
| -rw-r--r-- | resbox.mc3 | 70 |
17 files changed, 1980 insertions, 72 deletions
diff --git a/Arduino/main.c/main.c.ino b/Arduino/main.c/main.c.ino index 2efa972..94570bc 100644 --- a/Arduino/main.c/main.c.ino +++ b/Arduino/main.c/main.c.ino @@ -2,7 +2,7 @@ double VOLTAGE; double P150; double P100; -double load; +double load = 0; int Q150; int Q100; void setup() @@ -10,17 +10,24 @@ void setup() Wire.begin(0x00); Serial.begin(9600); Serial.println("Enter Nominal System Voltage:"); - VOLTAGE = Serial.read(); + while (Serial.available() == 0){;} + VOLTAGE = Serial.parseFloat(SKIP_ALL); Serial.print("System Voltage: "); Serial.println(VOLTAGE, DEC); - P150 = VOLTAGE/150; - P100 = VOLTAGE/100; + P150 = (VOLTAGE*VOLTAGE)/150; + P100 = (VOLTAGE*VOLTAGE)/100; Serial.println("Enter Load in kW:"); } void loop() { - load = Serial.read(); + Serial.flush(); + //while (!Serial.available()){;} + double temp = Serial.parseFloat(SKIP_ALL)*1000; + + if((temp != load)&&(temp > 0)) + { + load = temp; if(VOLTAGE <= 500) //We don't want to use the 100ohm resistors if the voltage is higher than 500 as they would draw excessive power. { Q100 = load/P100; @@ -38,8 +45,10 @@ void loop() Serial.print(" 150ohm and "); Serial.print(Q100, DEC); Serial.print(" 100ohm resistors will be activated. "); - Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC); - Serial.println("kW unaccounted for."); + //Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC); + Serial.print(((P150*Q150)+(P100*Q100)),DEC); + Serial.println("W Accounted for."); + } Wire.beginTransmission(0x01); //Controller Board Has Address 0x01 Wire.write((Q150 << 3) & Q150); Wire.endTransmission(); @@ -7,14 +7,15 @@ #include "SPI.h" +#include "mcc_generated_files/mssp1_spi.h" - uint16_t WriteBuffer[MY_BUFFER_SIZE]; - uint16_t ReadBuffer[MY_BUFFER_SIZE]; + uint8_t WriteBuffer[MY_BUFFER_SIZE]; + uint8_t ReadBuffer[MY_BUFFER_SIZE]; uint16_t writeData; uint16_t readData; uint8_t addr0; uint8_t addr1; - bool write; + uint8_t write; unsigned int total; /*do @@ -25,15 +26,17 @@ } while( total < MY_BUFFER_SIZE );*/ - void Message_OUT(uint8_t Ohm_150, uint8_t Ohm_68, bool testLED) + void Message_OUT(uint8_t Ohm_150, uint8_t Ohm_68, uint8_t testLED) { if (Ohm_150 > 15) Ohm_150 = 15; if (Ohm_68 > 5) Ohm_68 = 5; - WriteBuffer[0] = WriteBuffer[2] = WriteBuffer[4] = (write << 8) | (!write << 7) | 0b000000; + //WriteBuffer[0] = WriteBuffer[2] = WriteBuffer[4] = (write << 8) | (!write << 7) | 0b000000; + WriteBuffer[0] = WriteBuffer[2] = WriteBuffer[4] = 0b10000000; WriteBuffer[1] = (0xFF << Ohm_150) ^ (0xFF); WriteBuffer[3] = (0xFF << (Ohm_150 - 8)) ^ (0xFF); WriteBuffer[5] = (0xFF << (Ohm_68 - 4)) ^ (0xFF) | (testLED << 8); - if (Ohm_68 == 5) WriteBuffer[3]|= 0b10000000; + //if (Ohm_68 == 5) WriteBuffer[3]|= 0b10000000; + readData = MSSP1_SPI_Exchange8bitBuffer(WriteBuffer, 6, ReadBuffer); } void Message_BIM(uint8_t outputs[3]) @@ -94,10 +97,14 @@ void Message_HWCR(uint8_t outputs[3]) { - WriteBuffer[0] = WriteBuffer[2] = WriteBuffer[4] = (write << 8) | (!write << 7) | 0b001100; - WriteBuffer[1] = outputs[0]; - WriteBuffer[3] = outputs[1]; - WriteBuffer[5] = outputs[2]; + //WriteBuffer[0] = WriteBuffer[2] = WriteBuffer[4] = (write << 8) | (!write << 7) | 0b001100; + //WriteBuffer[1] = outputs[0]; + //WriteBuffer[3] = outputs[1]; + //WriteBuffer[5] = outputs[2]; + + WriteBuffer[0] = 0b10001100; + WriteBuffer[1] = 0b10000000; + readData = MSSP1_SPI_Exchange8bitBuffer(*WriteBuffer, 2, *ReadBuffer); } void Message_HWCROCL(uint8_t outputs[3]) @@ -8,7 +8,8 @@ #ifndef XC_SPI_H #define XC_SPI_H -#include "mcc_generated_files/mssp1_spi.h" +#include "stdint.h" + #define MY_BUFFER_SIZE 6 //3 Devices, each of which is 16 bit. (16/8)*3=6 @@ -31,7 +32,7 @@ PWMMAP //Selects one of the two PWM generators }; - void Message_OUT(uint8_t Ohm_150, uint8_t Ohm_68, bool testLED); + void Message_OUT(uint8_t Ohm_150, uint8_t Ohm_68, uint8_t testLED); /** @Summary Enables a selected quantity of 150 ohm resistors and 68 ohm resistors. diff --git a/build/default/production/SPI.o b/build/default/production/SPI.o Binary files differindex ef5c29d..4cbb2df 100644 --- a/build/default/production/SPI.o +++ b/build/default/production/SPI.o diff --git a/build/default/production/main.o b/build/default/production/main.o Binary files differindex 97811ea..a794a16 100644 --- a/build/default/production/main.o +++ b/build/default/production/main.o diff --git a/build/default/production/main.o.d b/build/default/production/main.o.d index 57653e3..b3bbd41 100644 --- a/build/default/production/main.o.d +++ b/build/default/production/main.o.d @@ -1 +1,6 @@ -build/default/production/main.o: main.c +build/default/production/main.o: main.c mcc_generated_files/system.h \ + SPI.h + +mcc_generated_files/system.h: + +SPI.h: diff --git a/build/default/production/mcc_generated_files/interrupt_manager.o b/build/default/production/mcc_generated_files/interrupt_manager.o Binary files differindex 371e272..8e18d22 100644 --- a/build/default/production/mcc_generated_files/interrupt_manager.o +++ b/build/default/production/mcc_generated_files/interrupt_manager.o diff --git a/build/default/production/mcc_generated_files/mssp1_spi.o b/build/default/production/mcc_generated_files/mssp1_spi.o Binary files differindex 79831d8..5464a16 100644 --- a/build/default/production/mcc_generated_files/mssp1_spi.o +++ b/build/default/production/mcc_generated_files/mssp1_spi.o diff --git a/build/default/production/mcc_generated_files/mssp2_i2c.o b/build/default/production/mcc_generated_files/mssp2_i2c.o Binary files differindex 5356210..3b6846c 100644 --- a/build/default/production/mcc_generated_files/mssp2_i2c.o +++ b/build/default/production/mcc_generated_files/mssp2_i2c.o diff --git a/build/default/production/mcc_generated_files/system.o b/build/default/production/mcc_generated_files/system.o Binary files differindex c8ca180..7758e51 100644 --- a/build/default/production/mcc_generated_files/system.o +++ b/build/default/production/mcc_generated_files/system.o diff --git a/build/default/production/mcc_generated_files/system.o.d b/build/default/production/mcc_generated_files/system.o.d index 8cbdc14..53c3ba4 100644 --- a/build/default/production/mcc_generated_files/system.o.d +++ b/build/default/production/mcc_generated_files/system.o.d @@ -1,8 +1,8 @@ build/default/production/mcc_generated_files/system.o: \ mcc_generated_files/system.c mcc_generated_files/pin_manager.h \ mcc_generated_files/clock.h mcc_generated_files/system.h \ - mcc_generated_files/mssp2_i2c.h mcc_generated_files/interrupt_manager.h \ - mcc_generated_files/traps.h mcc_generated_files/mssp1_spi.h + mcc_generated_files/interrupt_manager.h mcc_generated_files/traps.h \ + mcc_generated_files/mssp2_i2c.h mcc_generated_files/mssp1_spi.h mcc_generated_files/pin_manager.h: @@ -10,10 +10,10 @@ mcc_generated_files/clock.h: mcc_generated_files/system.h: -mcc_generated_files/mssp2_i2c.h: - mcc_generated_files/interrupt_manager.h: mcc_generated_files/traps.h: +mcc_generated_files/mssp2_i2c.h: + mcc_generated_files/mssp1_spi.h: @@ -45,22 +45,49 @@ /**
Section: Included Files
*/
-//#include "mcc_generated_files/system.h"
-#include <p24FV16KM202.h>
+#include "mcc_generated_files/system.h"
+#include "SPI.h"
/*
Main application
*/
+uint8_t nullarray = {0x00, 0x00, 0x00};
int main(void)
{
// initialize the device
- //SYSTEM_Initialize();
- //PORTB = 0b000000111110000;
- TRISB = 0xff;
+ SYSTEM_Initialize();
+ //OSCCONbits.SOSCEN = 0;
+ SPI_slaveDeselect();
+ _LATA0 = _LATA1 = 1;//_LATA4 = 1; //Activate gate driver chips
+ _LATA4 = 1;
+
+ SPI_slaveSelect();
+ Message_HWCR(nullarray);
+ SPI_slaveDeselect();
+
+ _LATB6 = 0;
+ _LATB7 = 1;
+ _LATB8 = 1;
+
while (1)
{
- PORTB=0x00;
+ SPI_slaveSelect();
+ Message_OUT(15, 5, 0);
+ SPI_slaveDeselect();
+ /*
+ SPI_slaveSelect();
+ Message_OUT(15, 5, 0);
+ SPI_slaveDeselect();
+
+ SPI_slaveSelect();
+ Message_OUT(15, 5, 0);
+ SPI_slaveDeselect();
+
+ SPI_slaveSelect();
+ Message_OUT(15, 5, 0);
+ SPI_slaveDeselect();
+*/
}
return 1;
diff --git a/nbproject/Makefile-genesis.properties b/nbproject/Makefile-genesis.properties index 7e1e353..0f3374c 100644 --- a/nbproject/Makefile-genesis.properties +++ b/nbproject/Makefile-genesis.properties @@ -1,11 +1,11 @@ # -#Wed Jan 31 20:34:31 CST 2024 +#Wed Mar 06 04:10:54 CST 2024 default.languagetoolchain.version=2.10 default.Pack.dfplocation=/opt/microchip/mplabx/v6.15/packs/Microchip/PIC24F-KA-KL-KM_DFP/1.4.83 conf.ids=default default.languagetoolchain.dir=/opt/microchip/xc16/v2.10/bin host.id=2oqs-k23c-b5 -configurations-xml=4c5412c9fb2829082b03a3b277b024e2 +configurations-xml=aae6a2fa6b09eec831650b355357fe0b com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=e62346c0c0ecee2637e613b49cb7b7fa proj.dir=/home/josh/MPLABXProjects/resbox.X default.com-microchip-mplab-mdbcore-pk4hybrid-Pk4HybridTooImpl.md5=38058ec39ea8224adcc766836376f0d6 diff --git a/nbproject/configurations.xml b/nbproject/configurations.xml index 48a4d3e..87b477f 100644 --- a/nbproject/configurations.xml +++ b/nbproject/configurations.xml @@ -220,6 +220,480 @@ <property key="relaxed-math" value="false"/> <property key="save-temps" value="false"/> </C30Global> + <Simulator> + <property key="codecoverage.enabled" value="Disable"/> + <property key="codecoverage.enableoutputtofile" value="false"/> + <property key="codecoverage.outputfile" value=""/> + <property key="debugoptions.debug-startup" value="Use system settings"/> + <property key="debugoptions.reset-behaviour" value="Use system settings"/> + <property key="event.recorder.enabled" value="false"/> + <property key="event.recorder.scvd.files" value=""/> + <property key="lastid" value=""/> + <property key="oscillator.auxfrequency" value="120"/> + <property key="oscillator.auxfrequencyunit" value="Mega"/> + <property key="oscillator.frequency" value="1"/> + <property key="oscillator.frequencyunit" value="Mega"/> + <property key="oscillator.rcfrequency" value="250"/> + <property key="oscillator.rcfrequencyunit" value="Kilo"/> + <property key="periphADC1.altscl" value="false"/> + <property key="periphADC1.minTacq" value=""/> + <property key="periphADC1.tacqunits" value="microseconds"/> + <property key="periphADC2.altscl" value="false"/> + <property key="periphADC2.minTacq" value=""/> + <property key="periphADC2.tacqunits" value="microseconds"/> + <property key="periphComp1.gte" value="gt"/> + <property key="periphComp2.gte" value="gt"/> + <property key="periphComp3.gte" value="gt"/> + <property key="periphComp4.gte" value="gt"/> + <property key="periphComp5.gte" value="gt"/> + <property key="periphComp6.gte" value="gt"/> + <property key="reset.scl" value="false"/> + <property key="reset.type" value="MCLR"/> + <property key="toolpack.updateoptions" + value="toolpack.updateoptions.uselatestoolpack"/> + <property key="toolpack.updateoptions.packversion" + value="Press to select which tool pack to use"/> + <property key="tracecontrol.include.timestamp" value="summarydataenabled"/> + <property key="tracecontrol.select" value="0"/> + <property key="tracecontrol.stallontracebufferfull" value="false"/> + <property key="tracecontrol.timestamp" value="0"/> + <property key="tracecontrol.tracebufmax" value="546000"/> + <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/> + <property key="tracecontrol.traceresetonrun" value="false"/> + <property key="uart0io.output" value="window"/> + <property key="uart0io.outputfile" value=""/> + <property key="uart0io.uartioenabled" value="false"/> + <property key="uart1io.output" value="window"/> + <property key="uart1io.outputfile" value=""/> + <property key="uart1io.uartioenabled" value="false"/> + <property key="uart2io.output" value="window"/> + <property key="uart2io.outputfile" value=""/> + <property key="uart2io.uartioenabled" value="false"/> + <property key="uart3io.output" value="window"/> + <property key="uart3io.outputfile" value=""/> + <property key="uart3io.uartioenabled" value="false"/> + <property key="uart4io.output" value="window"/> + <property key="uart4io.outputfile" value=""/> + <property key="uart4io.uartioenabled" value="false"/> + <property key="uart5io.output" value="window"/> + <property key="uart5io.outputfile" value=""/> + <property key="uart5io.uartioenabled" value="false"/> + <property key="uart6io.output" value="window"/> + <property key="uart6io.outputfile" value=""/> + <property key="uart6io.uartioenabled" value="false"/> + <property key="usart0io.output" value="window"/> + <property key="usart0io.outputfile" value=""/> + <property key="usart0io.uartioenabled" value="false"/> + <property key="usart1io.output" value="window"/> + <property key="usart1io.outputfile" value=""/> + <property key="usart1io.uartioenabled" value="false"/> + <property key="usart2io.output" value="window"/> + <property key="usart2io.outputfile" value=""/> + <property key="usart2io.uartioenabled" value="false"/> + <property key="usart3io.output" value="window"/> + <property key="usart3io.outputfile" value=""/> + <property key="usart3io.uartioenabled" value="false"/> + <property key="usart4io.output" value="window"/> + <property key="usart4io.outputfile" value=""/> + <property key="usart4io.uartioenabled" value="false"/> + <property key="usartc0io.output" value="window"/> + <property key="usartc0io.outputfile" value=""/> + <property key="usartc0io.uartioenabled" value="false"/> + <property key="usartc1io.output" value="window"/> + <property key="usartc1io.outputfile" value=""/> + <property key="usartc1io.uartioenabled" value="false"/> + <property key="usartd0io.output" value="window"/> + <property key="usartd0io.outputfile" value=""/> + <property key="usartd0io.uartioenabled" value="false"/> + <property key="usartd1io.output" value="window"/> + <property key="usartd1io.outputfile" value=""/> + <property key="usartd1io.uartioenabled" value="false"/> + <property key="usarte0io.output" value="window"/> + <property key="usarte0io.outputfile" value=""/> + <property key="usarte0io.uartioenabled" value="false"/> + <property key="usarte1io.output" value="window"/> + <property key="usarte1io.outputfile" value=""/> + <property key="usarte1io.uartioenabled" value="false"/> + <property key="usarte2io.output" value="window"/> + <property key="usarte2io.outputfile" value=""/> + <property key="usarte2io.uartioenabled" value="false"/> + <property key="usartf0io.output" value="window"/> + <property key="usartf0io.outputfile" value=""/> + <property key="usartf0io.uartioenabled" value="false"/> + <property key="usartf1io.output" value="window"/> + <property key="usartf1io.outputfile" value=""/> + <property key="usartf1io.uartioenabled" value="false"/> + <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN" + value="report"/> + <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/> + <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/> + <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE" + value="report"/> + <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET" + value="report"/> + <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR" + value="report"/> + <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE" + value="report"/> + <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE" + value="report"/> + <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT" + value="report"/> + <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT" + value="report"/> + <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO" + value="report"/> + <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/> + <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY" + value="report"/> + <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/> + <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT" + value="report"/> + <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY" + value="report"/> + <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE" + value="report"/> + <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP" + value="report"/> + <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION" + value="report"/> + <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11" + value="report"/> + <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED" + value="report"/> + <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY" + value="report"/> + <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT" + value="report"/> + <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT" + value="report"/> + <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED" + value="report"/> + <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING" + value="report"/> + <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED" + value="report"/> + <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL" + value="report"/> + <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD" + value="report"/> + <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING" + value="report"/> + <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT" + value="report"/> + <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT" + value="report"/> + <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION" + value="report"/> + <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR" + value="report"/> + <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/> + <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION" + value="report"/> + <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/> + <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD" + value="report"/> + <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL" + value="report"/> + <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION" + value="report"/> + <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT" + value="report"/> + <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED" + value="report"/> + <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL" + value="report"/> + <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC" + value="report"/> + <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/> + <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/> + <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S" + value="report"/> + <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/> + <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY" + value="report"/> + <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING" + value="report"/> + <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED" + value="report"/> + <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED" + value="report"/> + <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET" + value="report"/> + <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED" + value="report"/> + <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED" + value="report"/> + <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR" + value="report"/> + <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/> + <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED" + value="report"/> + <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL" + value="report"/> + <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL" + value="report"/> + <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ" + value="report"/> + <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC" + value="report"/> + <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE" + value="report"/> + <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/> + <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW" + value="report"/> + <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING" + value="report"/> + <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP" + value="report"/> + <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG" + value="report"/> + <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS" + value="report"/> + <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS" + value="report"/> + <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED" + value="report"/> + <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES" + value="report"/> + <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED" + value="report"/> + <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE" + value="report"/> + <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER" + value="report"/> + <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND" + value="report"/> + <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED" + value="report"/> + <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED" + value="report"/> + <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL" + value="report"/> + <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/> + <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/> + <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR" + value="report"/> + <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH" + value="report"/> + <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/> + <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION" + value="report"/> + <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO" + value="report"/> + <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY" + value="report"/> + <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION" + value="report"/> + <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION" + value="report"/> + <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION" + value="report"/> + <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION" + value="report"/> + <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES" + value="report"/> + <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV" + value="report"/> + <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES" + value="report"/> + <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC" + value="report"/> + <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED" + value="report"/> + <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE" + value="report"/> + <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE" + value="report"/> + <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE" + value="report"/> + <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/> + <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE" + value="report"/> + <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT" + value="report"/> + <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION" + value="report"/> + <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND" + value="report"/> + <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL" + value="report"/> + <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR" + value="report"/> + <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED" + value="report"/> + <property key="warningmessagebreakoptions.displaywarningmessagesoption" + value=""/> + <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/> + </Simulator> <Tool> <property key="ADC 1" value="true"/> <property key="AutoSelectMemRanges" value="auto"/> @@ -229,7 +703,7 @@ <property key="Comparators" value="true"/> <property key="DAC 1" value="true"/> <property key="DAC 2" value="true"/> - <property key="Freeze All Other Peripherals" value="true"/> + <property key="Freeze All Other Peripherals" value="false"/> <property key="HLVD" value="true"/> <property key="MCCP/SCCP 1" value="true"/> <property key="MCCP/SCCP 2" value="true"/> @@ -251,6 +725,9 @@ <property key="UART 1" value="true"/> <property key="UART 2" value="true"/> <property key="ULPWU" value="true"/> + <property key="codecoverage.enabled" value="Disable"/> + <property key="codecoverage.enableoutputtofile" value="false"/> + <property key="codecoverage.outputfile" value=""/> <property key="communication.activationmode" value="nohv"/> <property key="communication.interface" value=""/> <property key="communication.interface.jtag" value="2wire"/> @@ -276,7 +753,27 @@ value="${memories.instruction.ram.ranges}"/> <property key="memories.programmemory" value="true"/> <property key="memories.programmemory.ranges" value="0-2bff"/> + <property key="oscillator.auxfrequency" value="120"/> + <property key="oscillator.auxfrequencyunit" value="Mega"/> + <property key="oscillator.frequency" value="1"/> + <property key="oscillator.frequencyunit" value="Mega"/> + <property key="oscillator.rcfrequency" value="250"/> + <property key="oscillator.rcfrequencyunit" value="Kilo"/> + <property key="periphADC1.altscl" value="false"/> + <property key="periphADC1.minTacq" value=""/> + <property key="periphADC1.tacqunits" value="microseconds"/> + <property key="periphADC2.altscl" value="false"/> + <property key="periphADC2.minTacq" value=""/> + <property key="periphADC2.tacqunits" value="microseconds"/> + <property key="periphComp1.gte" value="gt"/> + <property key="periphComp2.gte" value="gt"/> + <property key="periphComp3.gte" value="gt"/> + <property key="periphComp4.gte" value="gt"/> + <property key="periphComp5.gte" value="gt"/> + <property key="periphComp6.gte" value="gt"/> <property key="poweroptions.powerenable" value="true"/> + <property key="programmerToGoFilePath" + value="/home/josh/MPLABXProjects/resbox.X/debug/default/resbox_ptg"/> <property key="programmerToGoImageName" value="resbox_ptg"/> <property key="programoptions.donoteraseauxmem" value="false"/> <property key="programoptions.eraseb4program" value="true"/> @@ -286,7 +783,7 @@ <property key="programoptions.pgdconfig" value="pull down"/> <property key="programoptions.pgdresistor.value" value="4.7"/> <property key="programoptions.pgmentry.voltage" value="high"/> - <property key="programoptions.pgmspeed" value="Min"/> + <property key="programoptions.pgmspeed" value="Med"/> <property key="programoptions.preservedataflash" value="false"/> <property key="programoptions.preservedataflash.ranges" value="${memories.dataflash.default}"/> @@ -301,11 +798,453 @@ <property key="programoptions.testmodeentrymethod" value="VDDFirst"/> <property key="ptgProgramImage" value="true"/> <property key="ptgSendImage" value="true"/> + <property key="reset.scl" value="false"/> + <property key="reset.type" value="MCLR"/> <property key="toolpack.updateoptions" value="toolpack.updateoptions.uselatestoolpack"/> <property key="toolpack.updateoptions.packversion" value="Press to select which tool pack to use"/> + <property key="tracecontrol.include.timestamp" value="summarydataenabled"/> + <property key="tracecontrol.select" value="0"/> + <property key="tracecontrol.stallontracebufferfull" value="false"/> + <property key="tracecontrol.timestamp" value="0"/> + <property key="tracecontrol.tracebufmax" value="546000"/> + <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/> + <property key="tracecontrol.traceresetonrun" value="false"/> + <property key="uart0io.output" value="window"/> + <property key="uart0io.outputfile" value=""/> + <property key="uart0io.uartioenabled" value="false"/> + <property key="uart1io.output" value="window"/> + <property key="uart1io.outputfile" value=""/> + <property key="uart1io.uartioenabled" value="false"/> + <property key="uart2io.output" value="window"/> + <property key="uart2io.outputfile" value=""/> + <property key="uart2io.uartioenabled" value="false"/> + <property key="uart3io.output" value="window"/> + <property key="uart3io.outputfile" value=""/> + <property key="uart3io.uartioenabled" value="false"/> + <property key="uart4io.output" value="window"/> + <property key="uart4io.outputfile" value=""/> + <property key="uart4io.uartioenabled" value="false"/> + <property key="uart5io.output" value="window"/> + <property key="uart5io.outputfile" value=""/> + <property key="uart5io.uartioenabled" value="false"/> + <property key="uart6io.output" value="window"/> + <property key="uart6io.outputfile" value=""/> + <property key="uart6io.uartioenabled" value="false"/> + <property key="usart0io.output" value="window"/> + <property key="usart0io.outputfile" value=""/> + <property key="usart0io.uartioenabled" value="false"/> + <property key="usart1io.output" value="window"/> + <property key="usart1io.outputfile" value=""/> + <property key="usart1io.uartioenabled" value="false"/> + <property key="usart2io.output" value="window"/> + <property key="usart2io.outputfile" value=""/> + <property key="usart2io.uartioenabled" value="false"/> + <property key="usart3io.output" value="window"/> + <property key="usart3io.outputfile" value=""/> + <property key="usart3io.uartioenabled" value="false"/> + <property key="usart4io.output" value="window"/> + <property key="usart4io.outputfile" value=""/> + <property key="usart4io.uartioenabled" value="false"/> + <property key="usartc0io.output" value="window"/> + <property key="usartc0io.outputfile" value=""/> + <property key="usartc0io.uartioenabled" value="false"/> + <property key="usartc1io.output" value="window"/> + <property key="usartc1io.outputfile" value=""/> + <property key="usartc1io.uartioenabled" value="false"/> + <property key="usartd0io.output" value="window"/> + <property key="usartd0io.outputfile" value=""/> + <property key="usartd0io.uartioenabled" value="false"/> + <property key="usartd1io.output" value="window"/> + <property key="usartd1io.outputfile" value=""/> + <property key="usartd1io.uartioenabled" value="false"/> + <property key="usarte0io.output" value="window"/> + <property key="usarte0io.outputfile" value=""/> + <property key="usarte0io.uartioenabled" value="false"/> + <property key="usarte1io.output" value="window"/> + <property key="usarte1io.outputfile" value=""/> + <property key="usarte1io.uartioenabled" value="false"/> + <property key="usarte2io.output" value="window"/> + <property key="usarte2io.outputfile" value=""/> + <property key="usarte2io.uartioenabled" value="false"/> + <property key="usartf0io.output" value="window"/> + <property key="usartf0io.outputfile" value=""/> + <property key="usartf0io.uartioenabled" value="false"/> + <property key="usartf1io.output" value="window"/> + <property key="usartf1io.outputfile" value=""/> + <property key="usartf1io.uartioenabled" value="false"/> <property key="voltagevalue" value="5.0"/> + <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN" + value="report"/> + <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/> + <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/> + <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET" + value="report"/> + <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE" + value="report"/> + <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET" + value="report"/> + <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR" + value="report"/> + <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE" + value="report"/> + <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE" + value="report"/> + <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT" + value="report"/> + <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT" + value="report"/> + <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO" + value="report"/> + <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/> + <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY" + value="report"/> + <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/> + <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT" + value="report"/> + <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY" + value="report"/> + <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE" + value="report"/> + <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS" + value="report"/> + <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP" + value="report"/> + <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION" + value="report"/> + <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11" + value="report"/> + <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED" + value="report"/> + <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY" + value="report"/> + <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT" + value="report"/> + <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT" + value="report"/> + <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED" + value="report"/> + <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING" + value="report"/> + <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED" + value="report"/> + <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL" + value="report"/> + <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD" + value="report"/> + <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING" + value="report"/> + <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT" + value="report"/> + <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT" + value="report"/> + <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION" + value="report"/> + <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR" + value="report"/> + <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/> + <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION" + value="report"/> + <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/> + <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD" + value="report"/> + <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL" + value="report"/> + <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION" + value="report"/> + <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT" + value="report"/> + <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED" + value="report"/> + <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL" + value="report"/> + <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC" + value="report"/> + <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL" + value="report"/> + <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/> + <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/> + <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S" + value="report"/> + <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS" + value="report"/> + <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/> + <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY" + value="report"/> + <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING" + value="report"/> + <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED" + value="report"/> + <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED" + value="report"/> + <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET" + value="report"/> + <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE" + value="report"/> + <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED" + value="report"/> + <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED" + value="report"/> + <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR" + value="report"/> + <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/> + <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED" + value="report"/> + <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL" + value="report"/> + <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL" + value="report"/> + <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ" + value="report"/> + <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC" + value="report"/> + <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE" + value="report"/> + <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/> + <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW" + value="report"/> + <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING" + value="report"/> + <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP" + value="report"/> + <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG" + value="report"/> + <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS" + value="report"/> + <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS" + value="report"/> + <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED" + value="report"/> + <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES" + value="report"/> + <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED" + value="report"/> + <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED" + value="report"/> + <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE" + value="report"/> + <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER" + value="report"/> + <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND" + value="report"/> + <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE" + value="report"/> + <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED" + value="report"/> + <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED" + value="report"/> + <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL" + value="report"/> + <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/> + <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/> + <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR" + value="report"/> + <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH" + value="report"/> + <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/> + <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION" + value="report"/> + <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT" + value="report"/> + <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO" + value="report"/> + <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY" + value="report"/> + <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE" + value="report"/> + <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION" + value="report"/> + <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION" + value="report"/> + <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION" + value="report"/> + <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION" + value="report"/> + <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES" + value="report"/> + <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV" + value="report"/> + <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES" + value="report"/> + <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT" + value="report"/> + <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC" + value="report"/> + <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED" + value="report"/> + <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE" + value="report"/> + <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW" + value="report"/> + <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE" + value="report"/> + <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE" + value="report"/> + <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE" + value="report"/> + <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/> + <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE" + value="report"/> + <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT" + value="report"/> + <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE" + value="report"/> + <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION" + value="report"/> + <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND" + value="report"/> + <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE" + value="report"/> + <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL" + value="report"/> + <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR" + value="report"/> + <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION" + value="report"/> + <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED" + value="report"/> + <property key="warningmessagebreakoptions.displaywarningmessagesoption" + value=""/> + <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/> </Tool> <pk4hybrid> <property key="ADC 1" value="true"/> @@ -316,7 +1255,7 @@ <property key="Comparators" value="true"/> <property key="DAC 1" value="true"/> <property key="DAC 2" value="true"/> - <property key="Freeze All Other Peripherals" value="true"/> + <property key="Freeze All Other Peripherals" value="false"/> <property key="HLVD" value="true"/> <property key="MCCP/SCCP 1" value="true"/> <property key="MCCP/SCCP 2" value="true"/> @@ -364,8 +1303,6 @@ <property key="memories.programmemory" value="true"/> <property key="memories.programmemory.ranges" value="0-2bff"/> <property key="poweroptions.powerenable" value="true"/> - <property key="programmerToGoFilePath" - value="/home/josh/MPLABXProjects/resbox.X/debug/default/resbox_ptg"/> <property key="programmerToGoImageName" value="resbox_ptg"/> <property key="programoptions.donoteraseauxmem" value="false"/> <property key="programoptions.eraseb4program" value="true"/> @@ -375,7 +1312,7 @@ <property key="programoptions.pgdconfig" value="pull down"/> <property key="programoptions.pgdresistor.value" value="4.7"/> <property key="programoptions.pgmentry.voltage" value="high"/> - <property key="programoptions.pgmspeed" value="Min"/> + <property key="programoptions.pgmspeed" value="Med"/> <property key="programoptions.preservedataflash" value="false"/> <property key="programoptions.preservedataflash.ranges" value="${memories.dataflash.default}"/> diff --git a/nbproject/private/private.xml b/nbproject/private/private.xml index 2130e4f..9c9abde 100644 --- a/nbproject/private/private.xml +++ b/nbproject/private/private.xml @@ -5,8 +5,8 @@ <group> <file>file:/home/josh/MPLABXProjects/resbox.X/main.c</file> <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/mssp2_i2c.h</file> - <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/mssp1_spi.c</file> <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/clock.h</file> + <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/mssp1_spi.c</file> <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/clock.c</file> <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/pin_manager.c</file> <file>file:/home/josh/MPLABXProjects/resbox.X/mcc_generated_files/mssp1_spi.h</file> diff --git a/queuelogs/debugtool b/queuelogs/debugtool new file mode 100644 index 0000000..311c686 --- /dev/null +++ b/queuelogs/debugtool @@ -0,0 +1,918 @@ +331 1709157816036 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool is NOT null +331 1709157816036 GEN4_CONNECT_DIAGNOSTICS:AttachedToolPID = 9012, AttachedToolVID = 4d8 +331 1709157816036 GEN4_CONNECT_DIAGNOSTICS:transport type = USB +331 1709157816036 GEN4_CONNECT_DIAGNOSTICS:AttachedToolPID = 9012, AttachedToolVID = 4d8 +331 1709157816066 GEN4_CONNECT_DIAGNOSTICS:Before MPLABCommTool.Connect() +331 1709157816066 GEN4_CONNECT_DIAGNOSTICS:After MPLABCommTool.Connect() +331 1709157816066 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool.Connect() returned MPLABCOMM_NO_ERROR +331 1709157816066 GEN4_CONNECT_DIAGNOSTICS:Attaching to MPLABCommTool plugnplay +331 1709157816145 GEN4_CONNECT_DIAGNOSTICS:Adding new plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@2d0a4673 +331 1709157816145 GEN4_CONNECT_DIAGNOSTICS:Begin PlugNPlayObservers list dump: +331 1709157816145 GEN4_CONNECT_DIAGNOSTICS:com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@2d0a4673 +331 1709157816145 GEN4_CONNECT_DIAGNOSTICS:End PlugNPlayObservers list dump: +331 1709157816147 GEN4_CONNECT_DIAGNOSTICS:Registering for alternate PNP notifications. CommPnPCriteria.cPIDList = [2177, 2179, 217a, 2141, 9017, 901b, 9036, 9035], CommPnPCriteria.cSerialNumber = bur222271433 + +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:init +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: Values: +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: pcAddress = 0000002e, Vpp = 8.75, useRowEraseIfVoltageIsLow = false, voltageBelowWhichUseRowErase = 0.00, deviceName = PIC24FV16KM202, programmerType = PIC24FJ +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: MemInfo values: +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffffff, exists = true, startAddr = 00000000, endAddr = 00002bff, rowSize = 0040, rowEraseSize = 0040, addrInc = 0002, widthProgram = 0004 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffff, exists = true, startAddr = 00f80000, endAddr = 00f8000f, rowSize = 0001, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffff, exists = true, startAddr = 007ffe00, endAddr = 007fffff, rowSize = 0002, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffffff, exists = true, startAddr = 00800000, endAddr = 0080087f, rowSize = 0040, rowEraseSize = 0040, addrInc = 0002, widthProgram = 0004 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816258 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 7fffffff, exists = true, startAddr = 00ff0000, endAddr = 00ff0003, rowSize = 0001, rowEraseSize = 0000, addrInc = 0001, widthProgram = 0001 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: CfgRequiredBitsMask Values: +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80000, Mask = 0000000f +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80004, Mask = 00000003 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80006, Mask = 000000e7 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80008, Mask = 000000ff +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000a, Mask = 000000ff +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000c, Mask = 000000ff +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000e, Mask = 00000003 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 BasicInfo: Values: +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 BasicInfo: InputStream = com.microchip.mplab.libs.toolpacksupport.EquatableFileInputStream@90596e92, ToolFlavor = PICKit4 +331 1709157816259 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:init +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 none +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4DebugInterface +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4DebugInterfaceImpl@2dea6c60 +331 1709157818768 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ProgramInterface +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4ProgramInterfaceImpl@2529a290 +331 1709157818784 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ConnectInterface +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.PK4ToolsController.PK4ConnectInterfaceImpl@bef3b7d +331 1709157818802 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End +331 1709157818807 GEN4_CONNECT_DIAGNOSTICS:acceptablePIDs = [9012, 9017, 901b, 9036, 9035] +331 1709157818807 GEN4_CONNECT_DIAGNOSTICS:otherPIDs = [2177, 2179, 217a, 2141] +331 1709157818807 GEN4_CONNECT_DIAGNOSTICS:Setting selected tool type to pk4 +331 1709157818807 GEN4_CONNECT_DIAGNOSTICS:otherPIDs = [2177, 2179, 217a, 2141] +331 1709157818807 GEN4_CONNECT_DIAGNOSTICS:acceptablePIDs = [9012, 9017, 901b, 9036, 9035] + +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:selectCore +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PIC24FV16KM202 +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:selectCore +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ControllerDiagnosticsInterface +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4ControllerDiagnosticsInterfaceImpl@3a0d9e41 +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 ProgrammerToGo +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.ProgrammerToGoImpl@7bafe7a6 +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Status +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 null +331 1709157818809 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End +331 1709157818815 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() +331 1709157818815 GEN4_CONNECT_DIAGNOSTICS:Created FirmwareUpdateHandler com.microchip.mplab.mdbcore.pk4hybrid.pk4hybridFirmwareUpdateHandler@3fbafb37 +331 1709157818815 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:areWeInBoot returned false +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:inBoot = false +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:uMode = checkingVersions +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:selectedTool = pk4 +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:current tool mode = pk4 +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.GetUpdateInfo() +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:Parsing file for firmware updates +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.ParseSelectedVersionsFromJamFile() +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:Jame file line = boot.hex,010000 +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:Jame file line = scripts.xml,000585 +331 1709157818817 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app1 020085, 0040C000 +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app2 1.14.268, 00500000 +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app3 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app4 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app5 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app6 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app7 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app8 000000, FFFFFFFF +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.ri4ParseSelectedVersionsFromJamFile() +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.GetUpdateInfo() +331 1709157818818 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 + +331 1709157818818 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +331 1709157818818 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818818 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@7627771 +331 1709157818818 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818821 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +331 1709157818821 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +331 1709157818822 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818831 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +331 1709157818831 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818831 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +331 1709157818831 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +331 1709157818831 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +331 1709157818832 GEN4_CONNECT_DIAGNOSTICS:appNeedsUpdate returned false +331 1709157818832 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() + +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@7627771 +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +331 1709157818833 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818840 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +331 1709157818840 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818840 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +331 1709157818840 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +331 1709157818840 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818841 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +331 1709157818841 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818841 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +331 1709157818841 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818848 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +331 1709157818848 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818848 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +331 1709157818848 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +331 1709157818848 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +331 1709157818850 XXXX 1709157818850, Thread 331: XXXX 1709157818850, Entering Thread 331: Commands::runScriptWithUpload with script contents. contents[0] = 0x5e, ... +331 1709157818851 XXXX 1709157818851, Thread 331: XXXX 1709157818851, Entering Thread 331: ToolCommUsb::readTransfer, sideData is 0xd bytes long, transferDataLength is 0x4 bytes long +331 1709157818853 XXXX 1709157818853, Thread 331: XXXX 1709157818853, Exiting Thread 331: ToolCommUsb::readTransfer, cr.status = 0x0 +331 1709157818854 XXXX 1709157818853, Thread 331: XXXX 1709157818853, Exiting Thread 331: Commands::runScriptWithUpload +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:Created FirmwareUpdateHandler com.microchip.mplab.mdbcore.pk4hybrid.pk4hybridFirmwareUpdateHandler@3fbafb37 +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:areWeInBoot returned false +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:inBoot = false +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:uMode = done +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:selectedTool = pk4 +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:current tool mode = pk4 +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.updatePk4HybridFirmware() +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:Don't upgrade fimware = false +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.updatePk4HybridFirmware() +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +331 1709157818854 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() + +331 1709157818854 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetPowerInfo +331 1709157818854 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818854 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: Values: +331 1709157818854 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: shotDownSystem = false, isToolPower = false, voltage = 5.000000, useVppFirst = false, useLowVoltageProgramming = false, useMaintainActivePower = false +331 1709157818854 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818855 XXXX 1709157818855, Thread 331: XXXX 1709157818855, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x39, ... +331 1709157818855 XXXX 1709157818855, Thread 331: XXXX 1709157818855, Exiting Thread 331: Commands::runScriptBasic +331 1709157818856 XXXX 1709157818856, Thread 331: XXXX 1709157818856, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x46, ... +331 1709157818856 XXXX 1709157818856, Thread 331: XXXX 1709157818856, Exiting Thread 331: Commands::runScriptBasic +331 1709157818856 XXXX 1709157818856, Thread 331: XXXX 1709157818856, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +331 1709157818869 XXXX 1709157818869, Thread 331: XXXX 1709157818869, Exiting Thread 331: Commands::runScriptBasic +331 1709157818869 XXXX 1709157818869, Thread 331: XXXX 1709157818869, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0xef, ... +331 1709157818879 XXXX 1709157818879, Thread 331: XXXX 1709157818879, Exiting Thread 331: Commands::runScriptBasic +331 1709157818879 XXXX 1709157818879, Thread 331: XXXX 1709157818879, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x40, ... +331 1709157818914 XXXX 1709157818914, Thread 331: Type = runScript, Script name = unnamed, Status = 0x305 + +331 1709157818915 XXXX 1709157818915, Thread 331: XXXX 1709157818915, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +331 1709157818928 XXXX 1709157818928, Thread 331: XXXX 1709157818928, Exiting Thread 331: Commands::runScriptBasic +331 1709157818931 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool is null + +331 1709157818931 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +331 1709157818931 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818931 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +331 1709157818931 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetPowerInfo +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: Values: +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: shotDownSystem = true, isToolPower = false, voltage = 0.000000, useVppFirst = false, useLowVoltageProgramming = false, useMaintainActivePower = false +331 1709157818938 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +331 1709157818938 XXXX 1709157818938, Thread 331: XXXX 1709157818938, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x39, ... +331 1709157818939 XXXX 1709157818939, Thread 331: XXXX 1709157818939, Exiting Thread 331: Commands::runScriptBasic +331 1709157818939 XXXX 1709157818939, Thread 331: XXXX 1709157818939, Entering Thread 331: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +331 1709157818952 XXXX 1709157818952, Thread 331: XXXX 1709157818952, Exiting Thread 331: Commands::runScriptBasic +331 1709157818952 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetPowerInfo +331 1709157818952 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +331 1709157818952 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +331 1709157818952 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +331 1709157818952 GEN4_CONNECT_DIAGNOSTICS:Removing plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@2d0a4673 +331 1709157818952 GEN4_CONNECT_DIAGNOSTICS:Begin PlugNPlayObservers list dump: +331 1709157818952 GEN4_CONNECT_DIAGNOSTICS:End PlugNPlayObservers list dump: +331 1709157819003 GEN4_CONNECT_DIAGNOSTICS:Calling RIDbgToolCom.Disconnect +331 1709157819003 GEN4_CONNECT_DIAGNOSTICS:Calling MPLABCommTool.Detach to remove tool from plug and play list +331 1709157819003 GEN4_CONNECT_DIAGNOSTICS:Calling RIDbgToolCom.DisconnectFromMPlabComm +331 1709157819003 GEN4_CONNECT_DIAGNOSTICS:Calling MPLABCommTool.Disconnect +430 1709157844068 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool is NOT null +430 1709157844068 GEN4_CONNECT_DIAGNOSTICS:AttachedToolPID = 9012, AttachedToolVID = 4d8 +430 1709157844068 GEN4_CONNECT_DIAGNOSTICS:transport type = USB +430 1709157844068 GEN4_CONNECT_DIAGNOSTICS:AttachedToolPID = 9012, AttachedToolVID = 4d8 +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:Before MPLABCommTool.Connect() +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:After MPLABCommTool.Connect() +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool.Connect() returned MPLABCOMM_NO_ERROR +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:Attaching to MPLABCommTool plugnplay +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:Adding new plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:Begin PlugNPlayObservers list dump: +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:End PlugNPlayObservers list dump: +430 1709157844069 GEN4_CONNECT_DIAGNOSTICS:Registering for alternate PNP notifications. CommPnPCriteria.cPIDList = [2177, 2179, 217a, 2141, 9017, 901b, 9036, 9035], CommPnPCriteria.cSerialNumber = bur222271433 + +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:init +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: Values: +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: pcAddress = 0000002e, Vpp = 8.75, useRowEraseIfVoltageIsLow = false, voltageBelowWhichUseRowErase = 0.00, deviceName = PIC24FV16KM202, programmerType = PIC24FJ +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: MemInfo values: +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffffff, exists = true, startAddr = 00000000, endAddr = 00002bff, rowSize = 0040, rowEraseSize = 0040, addrInc = 0002, widthProgram = 0004 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffff, exists = true, startAddr = 00f80000, endAddr = 00f8000f, rowSize = 0001, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffff, exists = true, startAddr = 007ffe00, endAddr = 007fffff, rowSize = 0002, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = ffffff, exists = true, startAddr = 00800000, endAddr = 0080087f, rowSize = 0040, rowEraseSize = 0040, addrInc = 0002, widthProgram = 0004 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0002, widthProgram = 0002 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 7fffffff, exists = true, startAddr = 00ff0000, endAddr = 00ff0003, rowSize = 0001, rowEraseSize = 0000, addrInc = 0001, widthProgram = 0001 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: mask = 0000, exists = false, startAddr = 00000000, endAddr = 00000000, rowSize = 0000, rowEraseSize = 0000, addrInc = 0000, widthProgram = 0000 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 DeviceInfo: CfgRequiredBitsMask Values: +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80000, Mask = 0000000f +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80004, Mask = 00000003 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80006, Mask = 000000e7 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f80008, Mask = 000000ff +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000a, Mask = 000000ff +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000c, Mask = 000000ff +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Address = 00f8000e, Mask = 00000003 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 BasicInfo: Values: +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 BasicInfo: InputStream = com.microchip.mplab.libs.toolpacksupport.EquatableFileInputStream@90596e92, ToolFlavor = PICKit4 +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:init +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 none +430 1709157844115 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4DebugInterface +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4DebugInterfaceImpl@6fb3bc0 +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ProgramInterface +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4ProgramInterfaceImpl@420e64d5 +430 1709157844116 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ConnectInterface +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.PK4ToolsController.PK4ConnectInterfaceImpl@1901c83c +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End +430 1709157844117 GEN4_CONNECT_DIAGNOSTICS:acceptablePIDs = [9012, 9017, 901b, 9036, 9035] +430 1709157844117 GEN4_CONNECT_DIAGNOSTICS:otherPIDs = [2177, 2179, 217a, 2141] +430 1709157844117 GEN4_CONNECT_DIAGNOSTICS:Setting selected tool type to pk4 +430 1709157844117 GEN4_CONNECT_DIAGNOSTICS:otherPIDs = [2177, 2179, 217a, 2141] +430 1709157844117 GEN4_CONNECT_DIAGNOSTICS:acceptablePIDs = [9012, 9017, 901b, 9036, 9035] + +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 RI4ControllerDiagnosticsInterface +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.RI4ControllerDiagnosticsInterfaceImpl@421e335d +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 ProgrammerToGo +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.libs.RI4ToolsController.implementations.ProgrammerToGoImpl@1d6425e5 +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Pre:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Status +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Post:GetInterfaceProvider +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 null +430 1709157844117 GEN4_TO_CONTROLLER_LOG:GEN4_INIT_INT_LOG_PIC24FV16KM202 Return End +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:Created FirmwareUpdateHandler com.microchip.mplab.mdbcore.pk4hybrid.pk4hybridFirmwareUpdateHandler@187da628 +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:areWeInBoot returned false +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:inBoot = false +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:uMode = checkingVersions +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:selectedTool = pk4 +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:current tool mode = pk4 +430 1709157844118 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.GetUpdateInfo() +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Parsing file for firmware updates +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.ParseSelectedVersionsFromJamFile() +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = boot.hex,010000 +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = scripts.xml,000585 +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app1 020085, 0040C000 +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app2 1.14.268, 00500000 +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app3 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app4 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app5 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app6 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app7 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:Jame file line = app8 000000, FFFFFFFF +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.ri4ParseSelectedVersionsFromJamFile() +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.GetUpdateInfo() +430 1709157844119 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 + +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +430 1709157844119 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844126 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +430 1709157844126 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844126 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +430 1709157844126 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +430 1709157844126 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +430 1709157844127 GEN4_CONNECT_DIAGNOSTICS:appNeedsUpdate returned false +430 1709157844127 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() + +430 1709157844127 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +430 1709157844127 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844127 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +430 1709157844127 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +430 1709157844128 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +430 1709157844135 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844143 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +430 1709157844143 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844143 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +430 1709157844143 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +430 1709157844143 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +430 1709157844143 XXXX 1709157844143, Thread 430: XXXX 1709157844143, Entering Thread 430: Commands::runScriptWithUpload with script contents. contents[0] = 0x5e, ... +430 1709157844143 XXXX 1709157844143, Thread 430: XXXX 1709157844143, Entering Thread 430: ToolCommUsb::readTransfer, sideData is 0xd bytes long, transferDataLength is 0x4 bytes long +430 1709157844145 XXXX 1709157844145, Thread 430: XXXX 1709157844145, Exiting Thread 430: ToolCommUsb::readTransfer, cr.status = 0x0 +430 1709157844145 XXXX 1709157844145, Thread 430: XXXX 1709157844145, Exiting Thread 430: Commands::runScriptWithUpload +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:Created FirmwareUpdateHandler com.microchip.mplab.mdbcore.pk4hybrid.pk4hybridFirmwareUpdateHandler@187da628 +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:areWeInBoot returned false +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:inBoot = false +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:uMode = done +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:selectedTool = pk4 +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:current tool mode = pk4 +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.updatePk4HybridFirmware() +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:Don't upgrade fimware = false +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.updatePk4HybridFirmware() +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +430 1709157844145 GEN4_CONNECT_DIAGNOSTICS:EXITING: com.microchip.mplab.mdbcore.RI4Tool.ConnectionHandler.CheckForFWUpdates() + +430 1709157844145 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetPowerInfo +430 1709157844145 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844145 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: Values: +430 1709157844145 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: shotDownSystem = false, isToolPower = true, voltage = 5.000000, useVppFirst = false, useLowVoltageProgramming = false, useMaintainActivePower = false +430 1709157844145 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844145 XXXX 1709157844145, Thread 430: XXXX 1709157844145, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x39, ... +430 1709157844146 XXXX 1709157844146, Thread 430: XXXX 1709157844146, Exiting Thread 430: Commands::runScriptBasic +430 1709157844146 XXXX 1709157844146, Thread 430: XXXX 1709157844146, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x46, ... +430 1709157844147 XXXX 1709157844147, Thread 430: XXXX 1709157844147, Exiting Thread 430: Commands::runScriptBasic +430 1709157844147 XXXX 1709157844147, Thread 430: XXXX 1709157844147, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +430 1709157844159 XXXX 1709157844159, Thread 430: XXXX 1709157844159, Exiting Thread 430: Commands::runScriptBasic +430 1709157844159 XXXX 1709157844159, Thread 430: XXXX 1709157844159, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x40, ... +430 1709157844339 XXXX 1709157844339, Thread 430: XXXX 1709157844339, Exiting Thread 430: Commands::runScriptBasic +430 1709157844339 XXXX 1709157844339, Thread 430: XXXX 1709157844339, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x47, ... +430 1709157844344 XXXX 1709157844344, Thread 430: XXXX 1709157844344, Exiting Thread 430: Commands::runScriptBasic +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetPowerInfo +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetLEDBrightness +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 5 +430 1709157844344 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844344 XXXX 1709157844344, Thread 430: XXXX 1709157844344, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xcf, ... +430 1709157844345 XXXX 1709157844345, Thread 430: XXXX 1709157844345, Exiting Thread 430: Commands::runScriptBasic +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetLEDBrightness +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetToolInfo +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: Values: +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: speedLevel = 1, PGCResistance = 4700, PGDResistance = 4700, PGCPullDir = PullDown, PGDPullDir = PullDown, ICSPSelected = Wire2 +430 1709157844345 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844345 XXXX 1709157844345, Thread 430: XXXX 1709157844345, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0x27, ... +430 1709157844347 XXXX 1709157844347, Thread 430: XXXX 1709157844347, Exiting Thread 430: Commands::runScriptBasic +430 1709157844347 XXXX 1709157844347, Thread 430: XXXX 1709157844347, Entering Thread 430: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +430 1709157844348 XXXX 1709157844348, Thread 430: XXXX 1709157844348, Exiting Thread 430: Commands::runScriptBasic +430 1709157844348 XXXX 1709157844348, Thread 430: XXXX 1709157844348, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +430 1709157844349 XXXX 1709157844349, Thread 430: XXXX 1709157844349, Exiting Thread 430: Commands::runScriptBasic +430 1709157844349 XXXX 1709157844349, Thread 430: XXXX 1709157844349, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +430 1709157844350 XXXX 1709157844350, Thread 430: XXXX 1709157844350, Exiting Thread 430: Commands::runScriptBasic +430 1709157844350 XXXX 1709157844350, Thread 430: XXXX 1709157844350, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xd4, ... +430 1709157844351 XXXX 1709157844351, Thread 430: XXXX 1709157844351, Exiting Thread 430: Commands::runScriptBasic +430 1709157844351 XXXX 1709157844351, Thread 430: XXXX 1709157844351, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +430 1709157844352 XXXX 1709157844352, Thread 430: XXXX 1709157844352, Exiting Thread 430: Commands::runScriptBasic +430 1709157844352 XXXX 1709157844352, Thread 430: XXXX 1709157844352, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +430 1709157844353 XXXX 1709157844353, Thread 430: XXXX 1709157844353, Exiting Thread 430: Commands::runScriptBasic +430 1709157844353 XXXX 1709157844353, Thread 430: XXXX 1709157844353, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +430 1709157844354 XXXX 1709157844354, Thread 430: XXXX 1709157844354, Exiting Thread 430: Commands::runScriptBasic +430 1709157844354 XXXX 1709157844354, Thread 430: XXXX 1709157844354, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +430 1709157844355 XXXX 1709157844355, Thread 430: XXXX 1709157844355, Exiting Thread 430: Commands::runScriptBasic +430 1709157844355 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetToolInfo +430 1709157844355 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157844355 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +430 1709157844355 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157844356 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetTargetIDInfo +430 1709157844356 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +430 1709157844356 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +430 1709157844356 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +430 1709157844358 XXXX 1709157844358, Thread 430: XXXX 1709157844358, Entering Thread 430: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +430 1709157844359 XXXX 1709157844359, Thread 430: XXXX 1709157844359, Exiting Thread 430: Commands::runScriptBasic +430 1709157844359 XXXX 1709157844359, Thread 430: XXXX 1709157844359, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +430 1709157844360 XXXX 1709157844360, Thread 430: XXXX 1709157844360, Exiting Thread 430: Commands::runScriptBasic +430 1709157844360 XXXX 1709157844360, Thread 430: XXXX 1709157844360, Entering Thread 430: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +430 1709157844361 XXXX 1709157844361, Thread 430: XXXX 1709157844361, Exiting Thread 430: Commands::runScriptBasic +430 1709157844361 XXXX 1709157844361, Thread 430: XXXX 1709157844361, Entering Thread 430: Commands::runScriptBasic, script name = EnterTMOD_HV, timeOut = -1 ms +430 1709157845485 XXXX 1709157845485, Thread 430: XXXX 1709157845485, Exiting Thread 430: Commands::runScriptBasic +430 1709157845485 XXXX 1709157845485, Thread 430: XXXX 1709157845485, Entering Thread 430: Commands::runScriptBasic, script name = GetDeviceID, timeOut = -1 ms +430 1709157845487 XXXX 1709157845487, Thread 430: XXXX 1709157845487, Exiting Thread 430: Commands::runScriptBasic +430 1709157845487 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetTargetIDInfo +430 1709157845487 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +430 1709157845487 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 TargetIDInfo: Values: +430 1709157845487 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 TargetIDInfo: DeviceID = ffffffffffffffff +430 1709157845487 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:SendOperation +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Values: +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Type = read, Mask = 00000000, Erase = false, Production Mode = true +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 0, End = 2bff, Buffer Length = 22528, Type = Pgm, Mask = 00000000 +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = f80000, End = f8000f, Buffer Length = 16, Type = Cfg, Mask = 00000000 +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 7ffe00, End = 7fffff, Buffer Length = 512, Type = EEData, Mask = 00000000 +430 1709157867157 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +430 1709157867158 XXXX 1709157867158, Thread 430: XXXX 1709157867158, Entering Thread 430: Commands::runScriptWithUpload, script name = ReadProgmem +430 1709157867158 XXXX 1709157867158, Thread 430: XXXX 1709157867158, Entering Thread 430: ToolCommUsb::readTransfer, sideData is 0x96 bytes long, transferDataLength is 0x4200 bytes long +430 1709157870425 XXXX 1709157870425, Thread 430: XXXX 1709157870425, Exiting Thread 430: ToolCommUsb::readTransfer, cr.status = 0x0 +430 1709157870425 XXXX 1709157870425, Thread 430: XXXX 1709157870425, Exiting Thread 430: Commands::runScriptWithUpload +430 1709157870425 XXXX 1709157870425, Thread 430: XXXX 1709157870425, Entering Thread 430: Commands::runScriptWithUpload, script name = ReadDataEEmem +430 1709157870425 XXXX 1709157870425, Thread 430: XXXX 1709157870425, Entering Thread 430: ToolCommUsb::readTransfer, sideData is 0x77 bytes long, transferDataLength is 0x200 bytes long +430 1709157870536 XXXX 1709157870536, Thread 430: XXXX 1709157870536, Exiting Thread 430: ToolCommUsb::readTransfer, cr.status = 0x0 +430 1709157870536 XXXX 1709157870536, Thread 430: XXXX 1709157870536, Exiting Thread 430: Commands::runScriptWithUpload +430 1709157870536 XXXX 1709157870536, Thread 430: XXXX 1709157870536, Entering Thread 430: Commands::runScriptWithUpload, script name = ReadConfigmem +430 1709157870536 XXXX 1709157870536, Thread 430: XXXX 1709157870536, Entering Thread 430: ToolCommUsb::readTransfer, sideData is 0x47 bytes long, transferDataLength is 0x10 bytes long +430 1709157870543 XXXX 1709157870543, Thread 430: XXXX 1709157870543, Exiting Thread 430: ToolCommUsb::readTransfer, cr.status = 0x0 +430 1709157870543 XXXX 1709157870543, Thread 430: XXXX 1709157870543, Exiting Thread 430: Commands::runScriptWithUpload +430 1709157870543 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Post:SendOperation +430 1709157870543 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return Value +430 1709157870543 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 None +430 1709157870543 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return End + +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:endOfOperations +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 null +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Post:endOfOperations +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return Value +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 None +430 1709157870587 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return End + +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +441 1709157873960 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +441 1709157873968 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +441 1709157873968 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +441 1709157873968 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +441 1709157873968 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +441 1709157873968 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +441 1709157873968 XXXX 1709157873968, Thread 441: XXXX 1709157873968, Entering Thread 441: Commands::runScriptWithUpload with script contents. contents[0] = 0x5e, ... +441 1709157873968 XXXX 1709157873968, Thread 441: XXXX 1709157873968, Entering Thread 441: ToolCommUsb::readTransfer, sideData is 0xd bytes long, transferDataLength is 0x4 bytes long +441 1709157873969 XXXX 1709157873969, Thread 441: XXXX 1709157873969, Exiting Thread 441: ToolCommUsb::readTransfer, cr.status = 0x0 +441 1709157873969 XXXX 1709157873969, Thread 441: XXXX 1709157873969, Exiting Thread 441: Commands::runScriptWithUpload + +441 1709157873969 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetPowerInfo +441 1709157873969 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +441 1709157873969 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: Values: +441 1709157873969 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: shotDownSystem = false, isToolPower = true, voltage = 5.000000, useVppFirst = false, useLowVoltageProgramming = false, useMaintainActivePower = false +441 1709157873969 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +441 1709157873969 XXXX 1709157873969, Thread 441: XXXX 1709157873969, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x39, ... +441 1709157873970 XXXX 1709157873970, Thread 441: XXXX 1709157873970, Exiting Thread 441: Commands::runScriptBasic +441 1709157873970 XXXX 1709157873970, Thread 441: XXXX 1709157873970, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x46, ... +441 1709157873971 XXXX 1709157873971, Thread 441: XXXX 1709157873971, Exiting Thread 441: Commands::runScriptBasic +441 1709157873971 XXXX 1709157873971, Thread 441: XXXX 1709157873971, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +441 1709157873983 XXXX 1709157873983, Thread 441: XXXX 1709157873983, Exiting Thread 441: Commands::runScriptBasic +441 1709157873983 XXXX 1709157873983, Thread 441: XXXX 1709157873983, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x40, ... +441 1709157874163 XXXX 1709157874163, Thread 441: XXXX 1709157874163, Exiting Thread 441: Commands::runScriptBasic +441 1709157874163 XXXX 1709157874163, Thread 441: XXXX 1709157874163, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x47, ... +441 1709157874168 XXXX 1709157874168, Thread 441: XXXX 1709157874168, Exiting Thread 441: Commands::runScriptBasic +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetPowerInfo +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetLEDBrightness +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 5 +441 1709157874168 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +441 1709157874168 XXXX 1709157874168, Thread 441: XXXX 1709157874168, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xcf, ... +441 1709157874169 XXXX 1709157874169, Thread 441: XXXX 1709157874169, Exiting Thread 441: Commands::runScriptBasic +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetLEDBrightness +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetToolInfo +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: Values: +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: speedLevel = 1, PGCResistance = 4700, PGDResistance = 4700, PGCPullDir = PullDown, PGDPullDir = PullDown, ICSPSelected = Wire2 +441 1709157874169 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +441 1709157874169 XXXX 1709157874169, Thread 441: XXXX 1709157874169, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0x27, ... +441 1709157874170 XXXX 1709157874170, Thread 441: XXXX 1709157874170, Exiting Thread 441: Commands::runScriptBasic +441 1709157874170 XXXX 1709157874170, Thread 441: XXXX 1709157874170, Entering Thread 441: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +441 1709157874171 XXXX 1709157874171, Thread 441: XXXX 1709157874171, Exiting Thread 441: Commands::runScriptBasic +441 1709157874171 XXXX 1709157874171, Thread 441: XXXX 1709157874171, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +441 1709157874172 XXXX 1709157874172, Thread 441: XXXX 1709157874172, Exiting Thread 441: Commands::runScriptBasic +441 1709157874172 XXXX 1709157874172, Thread 441: XXXX 1709157874172, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +441 1709157874173 XXXX 1709157874173, Thread 441: XXXX 1709157874173, Exiting Thread 441: Commands::runScriptBasic +441 1709157874173 XXXX 1709157874173, Thread 441: XXXX 1709157874173, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xd4, ... +441 1709157874174 XXXX 1709157874174, Thread 441: XXXX 1709157874174, Exiting Thread 441: Commands::runScriptBasic +441 1709157874174 XXXX 1709157874174, Thread 441: XXXX 1709157874174, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +441 1709157874175 XXXX 1709157874175, Thread 441: XXXX 1709157874175, Exiting Thread 441: Commands::runScriptBasic +441 1709157874175 XXXX 1709157874175, Thread 441: XXXX 1709157874175, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +441 1709157874176 XXXX 1709157874176, Thread 441: XXXX 1709157874176, Exiting Thread 441: Commands::runScriptBasic +441 1709157874176 XXXX 1709157874176, Thread 441: XXXX 1709157874176, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +441 1709157874177 XXXX 1709157874177, Thread 441: XXXX 1709157874177, Exiting Thread 441: Commands::runScriptBasic +441 1709157874177 XXXX 1709157874177, Thread 441: XXXX 1709157874177, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +441 1709157874178 XXXX 1709157874178, Thread 441: XXXX 1709157874178, Exiting Thread 441: Commands::runScriptBasic +441 1709157874178 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetToolInfo +441 1709157874178 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +441 1709157874178 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +441 1709157874178 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:SendOperation +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Values: +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Type = read, Mask = 00000000, Erase = false, Production Mode = true +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 0, End = 2bff, Buffer Length = 22528, Type = Pgm, Mask = 00000000 +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = f80000, End = f8000f, Buffer Length = 16, Type = Cfg, Mask = 00000000 +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 7ffe00, End = 7fffff, Buffer Length = 512, Type = EEData, Mask = 00000000 +441 1709157874179 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +441 1709157874179 XXXX 1709157874179, Thread 441: XXXX 1709157874179, Entering Thread 441: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +441 1709157874180 XXXX 1709157874180, Thread 441: XXXX 1709157874180, Exiting Thread 441: Commands::runScriptBasic +441 1709157874180 XXXX 1709157874180, Thread 441: XXXX 1709157874180, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +441 1709157874181 XXXX 1709157874181, Thread 441: XXXX 1709157874181, Exiting Thread 441: Commands::runScriptBasic +441 1709157874181 XXXX 1709157874181, Thread 441: XXXX 1709157874181, Entering Thread 441: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +441 1709157874182 XXXX 1709157874182, Thread 441: XXXX 1709157874182, Exiting Thread 441: Commands::runScriptBasic +441 1709157874182 XXXX 1709157874182, Thread 441: XXXX 1709157874182, Entering Thread 441: Commands::runScriptBasic, script name = EnterTMOD_HV, timeOut = -1 ms +441 1709157875306 XXXX 1709157875306, Thread 441: XXXX 1709157875306, Exiting Thread 441: Commands::runScriptBasic +441 1709157875306 XXXX 1709157875306, Thread 441: XXXX 1709157875306, Entering Thread 441: Commands::runScriptWithUpload, script name = ReadProgmem +441 1709157875306 XXXX 1709157875306, Thread 441: XXXX 1709157875306, Entering Thread 441: ToolCommUsb::readTransfer, sideData is 0x96 bytes long, transferDataLength is 0x4200 bytes long +441 1709157878574 XXXX 1709157878574, Thread 441: XXXX 1709157878574, Exiting Thread 441: ToolCommUsb::readTransfer, cr.status = 0x0 +441 1709157878574 XXXX 1709157878574, Thread 441: XXXX 1709157878574, Exiting Thread 441: Commands::runScriptWithUpload +441 1709157878574 XXXX 1709157878574, Thread 441: XXXX 1709157878574, Entering Thread 441: Commands::runScriptWithUpload, script name = ReadDataEEmem +441 1709157878574 XXXX 1709157878574, Thread 441: XXXX 1709157878574, Entering Thread 441: ToolCommUsb::readTransfer, sideData is 0x77 bytes long, transferDataLength is 0x200 bytes long +441 1709157878685 XXXX 1709157878685, Thread 441: XXXX 1709157878685, Exiting Thread 441: ToolCommUsb::readTransfer, cr.status = 0x0 +441 1709157878685 XXXX 1709157878685, Thread 441: XXXX 1709157878685, Exiting Thread 441: Commands::runScriptWithUpload +441 1709157878685 XXXX 1709157878685, Thread 441: XXXX 1709157878685, Entering Thread 441: Commands::runScriptWithUpload, script name = ReadConfigmem +441 1709157878685 XXXX 1709157878685, Thread 441: XXXX 1709157878685, Entering Thread 441: ToolCommUsb::readTransfer, sideData is 0x47 bytes long, transferDataLength is 0x10 bytes long +441 1709157878692 XXXX 1709157878692, Thread 441: XXXX 1709157878692, Exiting Thread 441: ToolCommUsb::readTransfer, cr.status = 0x0 +441 1709157878692 XXXX 1709157878692, Thread 441: XXXX 1709157878692, Exiting Thread 441: Commands::runScriptWithUpload +441 1709157878692 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Post:SendOperation +441 1709157878692 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return Value +441 1709157878692 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 None +441 1709157878692 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return End + +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:endOfOperations +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 null +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Post:endOfOperations +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return Value +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 None +441 1709157878693 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return End + +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +452 1709157884444 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884451 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +452 1709157884451 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +452 1709157884451 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +452 1709157884451 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +452 1709157884451 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +452 1709157884451 XXXX 1709157884451, Thread 452: XXXX 1709157884451, Entering Thread 452: Commands::runScriptWithUpload with script contents. contents[0] = 0x5e, ... +452 1709157884451 XXXX 1709157884451, Thread 452: XXXX 1709157884451, Entering Thread 452: ToolCommUsb::readTransfer, sideData is 0xd bytes long, transferDataLength is 0x4 bytes long +452 1709157884452 XXXX 1709157884452, Thread 452: XXXX 1709157884452, Exiting Thread 452: ToolCommUsb::readTransfer, cr.status = 0x0 +452 1709157884452 XXXX 1709157884452, Thread 452: XXXX 1709157884452, Exiting Thread 452: Commands::runScriptWithUpload + +452 1709157884452 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetPowerInfo +452 1709157884452 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +452 1709157884452 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: Values: +452 1709157884452 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 PowerInfo: shotDownSystem = false, isToolPower = true, voltage = 5.000000, useVppFirst = false, useLowVoltageProgramming = false, useMaintainActivePower = false +452 1709157884452 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884452 XXXX 1709157884452, Thread 452: XXXX 1709157884452, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x39, ... +452 1709157884453 XXXX 1709157884453, Thread 452: XXXX 1709157884453, Exiting Thread 452: Commands::runScriptBasic +452 1709157884453 XXXX 1709157884453, Thread 452: XXXX 1709157884453, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x46, ... +452 1709157884454 XXXX 1709157884454, Thread 452: XXXX 1709157884454, Exiting Thread 452: Commands::runScriptBasic +452 1709157884454 XXXX 1709157884454, Thread 452: XXXX 1709157884454, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x44, ... +452 1709157884466 XXXX 1709157884466, Thread 452: XXXX 1709157884466, Exiting Thread 452: Commands::runScriptBasic +452 1709157884467 XXXX 1709157884467, Thread 452: XXXX 1709157884467, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x40, ... +452 1709157884646 XXXX 1709157884646, Thread 452: XXXX 1709157884646, Exiting Thread 452: Commands::runScriptBasic +452 1709157884646 XXXX 1709157884646, Thread 452: XXXX 1709157884646, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x47, ... +452 1709157884651 XXXX 1709157884651, Thread 452: XXXX 1709157884651, Exiting Thread 452: Commands::runScriptBasic +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetPowerInfo +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetLEDBrightness +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 5 +452 1709157884651 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884651 XXXX 1709157884651, Thread 452: XXXX 1709157884651, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xcf, ... +452 1709157884653 XXXX 1709157884653, Thread 452: XXXX 1709157884653, Exiting Thread 452: Commands::runScriptBasic +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetLEDBrightness +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:SetToolInfo +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: Values: +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 ToolInfo: speedLevel = 1, PGCResistance = 4700, PGDResistance = 4700, PGCPullDir = PullDown, PGDPullDir = PullDown, ICSPSelected = Wire2 +452 1709157884653 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884653 XXXX 1709157884653, Thread 452: XXXX 1709157884653, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0x27, ... +452 1709157884653 XXXX 1709157884653, Thread 452: XXXX 1709157884653, Exiting Thread 452: Commands::runScriptBasic +452 1709157884653 XXXX 1709157884653, Thread 452: XXXX 1709157884653, Entering Thread 452: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +452 1709157884654 XXXX 1709157884654, Thread 452: XXXX 1709157884654, Exiting Thread 452: Commands::runScriptBasic +452 1709157884654 XXXX 1709157884654, Thread 452: XXXX 1709157884654, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +452 1709157884655 XXXX 1709157884655, Thread 452: XXXX 1709157884655, Exiting Thread 452: Commands::runScriptBasic +452 1709157884655 XXXX 1709157884655, Thread 452: XXXX 1709157884655, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +452 1709157884656 XXXX 1709157884656, Thread 452: XXXX 1709157884656, Exiting Thread 452: Commands::runScriptBasic +452 1709157884656 XXXX 1709157884656, Thread 452: XXXX 1709157884656, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xd4, ... +452 1709157884657 XXXX 1709157884657, Thread 452: XXXX 1709157884657, Exiting Thread 452: Commands::runScriptBasic +452 1709157884657 XXXX 1709157884657, Thread 452: XXXX 1709157884657, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +452 1709157884658 XXXX 1709157884658, Thread 452: XXXX 1709157884658, Exiting Thread 452: Commands::runScriptBasic +452 1709157884658 XXXX 1709157884658, Thread 452: XXXX 1709157884658, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +452 1709157884659 XXXX 1709157884659, Thread 452: XXXX 1709157884659, Exiting Thread 452: Commands::runScriptBasic +452 1709157884659 XXXX 1709157884659, Thread 452: XXXX 1709157884659, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xcd, ... +452 1709157884660 XXXX 1709157884660, Thread 452: XXXX 1709157884660, Exiting Thread 452: Commands::runScriptBasic +452 1709157884660 XXXX 1709157884660, Thread 452: XXXX 1709157884660, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xce, ... +452 1709157884661 XXXX 1709157884661, Thread 452: XXXX 1709157884661, Exiting Thread 452: Commands::runScriptBasic +452 1709157884661 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:SetToolInfo +452 1709157884661 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +452 1709157884661 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 none +452 1709157884661 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:SendOperation +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Values: +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 OperationInfo: Type = erase, Mask = 00000000, Erase = false, Production Mode = true +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 0, End = 2bff, Buffer Length = 0, Type = Pgm, Mask = 00000000 +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = f80000, End = f8000f, Buffer Length = 0, Type = Cfg, Mask = 00000000 +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 TransferInfo: Start = 7ffe00, End = 7fffff, Buffer Length = 0, Type = EEData, Mask = 00000000 +452 1709157884715 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +452 1709157884715 XXXX 1709157884715, Thread 452: XXXX 1709157884715, Entering Thread 452: Commands::runScriptBasic, script name = SetSpeedFromDevice, timeOut = -1 ms +452 1709157884715 XXXX 1709157884715, Thread 452: XXXX 1709157884715, Exiting Thread 452: Commands::runScriptBasic +452 1709157884715 XXXX 1709157884715, Thread 452: XXXX 1709157884715, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xed, ... +452 1709157884716 XXXX 1709157884716, Thread 452: XXXX 1709157884716, Exiting Thread 452: Commands::runScriptBasic +452 1709157884716 XXXX 1709157884716, Thread 452: XXXX 1709157884716, Entering Thread 452: Commands::runScriptBasic with script contents. contents[0] = 0xec, ... +452 1709157884717 XXXX 1709157884717, Thread 452: XXXX 1709157884717, Exiting Thread 452: Commands::runScriptBasic +452 1709157884717 XXXX 1709157884717, Thread 452: XXXX 1709157884717, Entering Thread 452: Commands::runScriptBasic, script name = EnterTMOD_HV, timeOut = -1 ms +452 1709157885841 XXXX 1709157885841, Thread 452: XXXX 1709157885841, Exiting Thread 452: Commands::runScriptBasic +452 1709157885841 XXXX 1709157885841, Thread 452: XXXX 1709157885841, Entering Thread 452: Commands::runScriptBasic, script name = EraseChip, timeOut = 30000 ms +452 1709157886355 XXXX 1709157886355, Thread 452: Type = runScript, Script name = EraseChip, Status = 0x104 + + +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Pre:endOfOperations +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 null +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Payload End +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Post:endOfOperations +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return Value +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 None +452 1709157886356 GEN4_TO_CONTROLLER_LOG:GEN4_PROGRAM_INT_LOG_PIC24FV16KM202 Return End +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:Calling Update on plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:Entering plug and play Update(). Attached PID = 9012 +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:Entering MPLABCommEvent handler +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:MPLABCommEvent.pid = 9012 +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:eventType = MPLABCOMM_TOOL_UNPLUGGED +139 1709157897028 GEN4_CONNECT_DIAGNOSTICS:Exiting plug and play Update() +139 1709157899509 GEN4_CONNECT_DIAGNOSTICS:Before MPLABCommTool.Connect() +139 1709157899509 GEN4_CONNECT_DIAGNOSTICS:After MPLABCommTool.Connect() +139 1709157899510 GEN4_CONNECT_DIAGNOSTICS:Calling Update on plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +139 1709157899510 GEN4_CONNECT_DIAGNOSTICS:Entering plug and play Update(). Attached PID = 9012 +139 1709157899510 GEN4_CONNECT_DIAGNOSTICS:Entering MPLABCommEvent handler +139 1709157899510 GEN4_CONNECT_DIAGNOSTICS:MPLABCommEvent.pid = 9012 +139 1709157899510 GEN4_CONNECT_DIAGNOSTICS:eventType = MPLABCOMM_TOOL_PLUGGEDIN + +139 1709157899510 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +139 1709157899510 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +139 1709157899510 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +139 1709157899510 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +139 1709157899511 XXXX 1709157899511, Thread 139: com.Send returned false +139 1709157899511 XXXX 1709157899511, Thread 139: execCommand: exception after writeSideChanel null +139 1709157899511 GEN4_CONNECT_DIAGNOSTICS:Exiting plug and play Update() +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:Calling Update on plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:Entering plug and play Update(). Attached PID = 9012 +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:Entering MPLABCommEvent handler +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:MPLABCommEvent.pid = 9012 +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:eventType = MPLABCOMM_TOOL_UNPLUGGED +139 1709157899978 GEN4_CONNECT_DIAGNOSTICS:Exiting plug and play Update() +139 1709157902006 GEN4_CONNECT_DIAGNOSTICS:Before MPLABCommTool.Connect() +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:After MPLABCommTool.Connect() +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:MPLABCommTool.Connect() returned MPLABCOMM_NO_ERROR +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:Before detaching from MPLABCommTool plugnplay +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:Attaching to MPLABCommTool plugnplay +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:Calling Update on plug and play observer com.microchip.mplab.mdbcore.RI4Tool.RI4ToolBase$RI4PlugNPlayObserver@6e56a048 +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:Entering plug and play Update(). Attached PID = 9012 +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:Entering MPLABCommEvent handler +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:MPLABCommEvent.pid = 9012 +139 1709157902007 GEN4_CONNECT_DIAGNOSTICS:eventType = MPLABCOMM_TOOL_PLUGGEDIN + +139 1709157902007 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +139 1709157902007 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +139 1709157902007 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +139 1709157902007 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +139 1709157902014 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +139 1709157902014 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +139 1709157902014 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +139 1709157902014 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +139 1709157902014 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:ENTERING: com.microchip.mplab.mdbcore.RI4Tool.FirmwareUpdateHandler.UpdateFirmware(FirmwareInfo, UpdateMessage) +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:areWeInBoot returned false +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:inBoot = false +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:uMode = checkingVersions +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:selectedTool = pk4 +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:current tool mode = pk4 +139 1709157902015 GEN4_CONNECT_DIAGNOSTICS:current toolType = pk4 + +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +139 1709157902015 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +139 1709157902022 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:GetFirmwareInfo +139 1709157902022 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +139 1709157902022 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: Values: +139 1709157902022 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 FirmwareInfo: boot = false, bootVer = 01.00.00, apVer = 02.00.85, fpgaVer = ff.ff.ff, scriptVer = 00.05.85, macAddress = 0495683578354564950485156484856, devID = a1020e01, devID1 = 2, devSN0 = ffffffff, devSN1 = ffffffff, serialNumber = BUR222271433, appCommitID = null, scriptCommitID = d33d758f73, PCB_ID = 6 +139 1709157902022 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End +139 1709157902023 GEN4_CONNECT_DIAGNOSTICS:appNeedsUpdate returned false +139 1709157902023 GEN4_CONNECT_DIAGNOSTICS:Exiting plug and play Update() + +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:EstablishCommunincations +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 com.microchip.mplab.mdbcore.PK4Tool.PK4Com@1dff5089 +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Post:EstablishCommunincations +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return Value +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 true +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Return End + +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Pre:GetFirmwareInfo +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 null +462 1709157907523 GEN4_TO_CONTROLLER_LOG:GEN4_CONNECT_INT_LOG_PIC24FV16KM202 Payload End +462 1709157907523 XXXX 1709157907523, Thread 462: com.Send returned false +462 1709157907523 XXXX 1709157907523, Thread 462: execCommand: exception after writeSideChanel null @@ -52,11 +52,11 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="CLKPinsInput"/> - <value>enabled</value> + <value>disabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="CLKPinsOutput"/> - <value>enabled</value> + <value>disabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="CLOCK_FOSC"/> @@ -88,7 +88,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="ClockSource"/> - <value>External Clock</value> + <value>Primary Oscillator</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="ClockSwitching"/> @@ -264,15 +264,15 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="FrcPostscalerClock"/> - <value>4000000</value> + <value>8000000</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="OSCPinsInput"/> - <value>disabled</value> + <value>enabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="OSCPinsOutput"/> - <value>disabled</value> + <value>enabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="PllClock"/> @@ -288,7 +288,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="REFCLKOUT"/> - <value/> + <value>8000000.0</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="REFCLKOUT_ENABLE"/> @@ -339,6 +339,10 @@ <value>disabled</value> </entry> <entry> + <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="customClkOut"/> + <value>Port I/O enabled (CLKO disabled)</value> + </entry> + <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="INTERNAL OSCILLATOR" name="customMasterSlaveViewerEnable"/> <value>enabled</value> </entry> @@ -1216,7 +1220,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="MSSP1" name="OpMode"/> - <value>0</value> + <value>1</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="MSSP1" name="SCK1"/> @@ -1560,7 +1564,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="MSSP1" registerAlias="SSPSTAT"/> - <value>192</value> + <value>128</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP1" registerAlias="BCLI" settingAlias="context"/> @@ -1696,7 +1700,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP1" registerAlias="SSPSTAT" settingAlias="CKE"/> - <value>Active to Idle</value> + <value>Idle to Active</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP1" registerAlias="SSPSTAT" settingAlias="D_nA"/> @@ -2088,7 +2092,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="MSSP2" registerAlias="SSPSTAT"/> - <value>0</value> + <value>128</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP2" registerAlias="BCLI" settingAlias="context"/> @@ -2204,7 +2208,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP2" registerAlias="SSPI" settingAlias="enable"/> - <value>disabled</value> + <value>enabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP2" registerAlias="SSPI" settingAlias="flag"/> @@ -2244,7 +2248,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP2" registerAlias="SSPSTAT" settingAlias="SMP"/> - <value>High Speed</value> + <value>Standard Speed</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="MSSP2" registerAlias="SSPSTAT" settingAlias="UA"/> @@ -2464,7 +2468,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="Pin Module" name="anselUserSetRA3"/> - <value>disabled</value> + <value>enabled</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.CustomKey" moduleName="Pin Module" name="anselUserSetRA4"/> @@ -5320,11 +5324,11 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="System Module" registerAlias="FOSC"/> - <value>188</value> + <value>186</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="System Module" registerAlias="FOSCSEL"/> - <value>98</value> + <value>66</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.RegisterKey" moduleName="System Module" registerAlias="FPOR"/> @@ -5360,7 +5364,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FOSC" settingAlias="OSCIOFCN"/> - <value>OFF</value> + <value>ON</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FOSC" settingAlias="POSCFREQ"/> @@ -5368,7 +5372,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FOSC" settingAlias="POSCMOD"/> - <value>EC</value> + <value>HS</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FOSC" settingAlias="SOSCSEL"/> @@ -5388,7 +5392,7 @@ </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FOSCSEL" settingAlias="SOSCSRC"/> - <value>ANA</value> + <value>DIG</value> </entry> <entry> <key class="com.microchip.mcc.core.tokenManager.SettingKey" moduleName="System Module" registerAlias="FPOR" settingAlias="BOREN"/> @@ -5462,39 +5466,39 @@ </entry> <entry> <file>mcc_generated_files/mssp1_spi.c</file> - <hash>3f277585f081c9366f0b0aec266402c3736530fd2877fed73350fa9d1f505357</hash> - </entry> - <entry> - <file>mcc_generated_files/system.c</file> - <hash>0c09629a74f806a428013e66bff16ca94ce6374886bc01fc006f4d6d8e9ceb5a</hash> + <hash>7d1e76be4f44e0c3033e4839463fd15c463956f0ac4eda99aaa104aaa5c079f9</hash> </entry> <entry> <file>main.c</file> <hash>62990fd6c74361665b0487f7568abd48176fe4f567cce543690db2a436d03a07</hash> </entry> <entry> - <file>mcc_generated_files/mssp1_spi.h</file> - <hash>6028633bb6a6513606b543b57eac40d4690f44ec6865eafa03aba9a6dedfaca6</hash> + <file>mcc_generated_files/system.c</file> + <hash>4d49f0a71be32f17d0d14b686e7af8105d0e99bb192dadc9609cd1c336026801</hash> </entry> <entry> - <file>mcc_generated_files/clock.h</file> - <hash>3d193f5928f2ec9cfcc6ad65b919ebcd72aa3fdf95637843efb6ac6949857aae</hash> + <file>mcc_generated_files/mssp1_spi.h</file> + <hash>6028633bb6a6513606b543b57eac40d4690f44ec6865eafa03aba9a6dedfaca6</hash> </entry> <entry> <file>mcc_generated_files/traps.h</file> <hash>1b2e427e275d3221008b6176bdff465ef4ae43cdbacc3650ebfa64360d5e7780</hash> </entry> <entry> - <file>mcc_generated_files/clock.c</file> - <hash>0cab06910a07845a0da3552256a704d1ec16f9ef27d26c5c2a1ba5dec11acd11</hash> + <file>mcc_generated_files/clock.h</file> + <hash>3d193f5928f2ec9cfcc6ad65b919ebcd72aa3fdf95637843efb6ac6949857aae</hash> </entry> <entry> <file>mcc_generated_files/traps.c</file> <hash>c7984bb4b7a599f4c99e44fc894a33a2dd98187ecab007be4d47056b24237362</hash> </entry> <entry> + <file>mcc_generated_files/clock.c</file> + <hash>0cab06910a07845a0da3552256a704d1ec16f9ef27d26c5c2a1ba5dec11acd11</hash> + </entry> + <entry> <file>mcc_generated_files/mssp2_i2c.c</file> - <hash>936277a1f6609cf46687d3bf68d09b4fab1233ff31df75d5d52684662e5b8cd2</hash> + <hash>dd2f9baba6f9880e8b37a0c4eff07e4be8de9b3a48e1ccd447e439c8481a8f7d</hash> </entry> <entry> <file>mcc_generated_files/mssp2_i2c.h</file> @@ -5502,7 +5506,7 @@ </entry> <entry> <file>mcc_generated_files/mcc.h</file> - <hash>450f290780774dd9e735ef58252c469673aa1c1132776caeef8d68c7abe9b4df</hash> + <hash>5138be3f7a497246c6f3b9216563623cac5b138c2d3e3604911cf70d29649c40</hash> </entry> <entry> <file>mcc_generated_files/system.h</file> @@ -5510,7 +5514,7 @@ </entry> <entry> <file>mcc_generated_files/interrupt_manager.c</file> - <hash>84eae1f2324f80ca7e630f8db7139a0aa8aa30309344ec9b5d0e75752abe307c</hash> + <hash>5aa7d6f716190716f932beb751109385a961c8bb543fb71f1895bb3d1ccd1610</hash> </entry> <entry> <file>mcc_generated_files/mcc.c</file> |