diff options
Diffstat (limited to 'mcc_generated_files/usb/usb_config.h')
| -rw-r--r-- | mcc_generated_files/usb/usb_config.h | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/mcc_generated_files/usb/usb_config.h b/mcc_generated_files/usb/usb_config.h new file mode 100644 index 0000000..76fa587 --- /dev/null +++ b/mcc_generated_files/usb/usb_config.h @@ -0,0 +1,118 @@ +/**
+ * USB_CONFIG Generated Config Header File
+ *
+ * @file usb_config.h
+ *
+ * @defgroup usb_device_stack USB_DEVICE_STACK
+ *
+ * @brief This is a device-specific USB static configuration file that will be editable
+ * through a code composer tool, build script or manual entry by a user.
+ *
+ * The file encompasses static settings like number of endpoints, features to be enabled, etc.
+ *
+ * @version USB_DEVICE_STACK Driver Version 1.0.0
+*/
+/*
+© [2025] Microchip Technology Inc. and its subsidiaries.
+
+ Subject to your compliance with these terms, you may use Microchip
+ software and any derivatives exclusively with Microchip products.
+ You are responsible for complying with 3rd party license terms
+ applicable to your use of 3rd party software (including open source
+ software) that may accompany Microchip software. SOFTWARE IS ?AS IS.?
+ NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS
+ SOFTWARE, INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT,
+ MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
+ WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
+ INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY
+ KIND WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF
+ MICROCHIP HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE
+ FORESEEABLE. TO THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP?S
+ TOTAL LIABILITY ON ALL CLAIMS RELATED TO THE SOFTWARE WILL NOT
+ EXCEED AMOUNT OF FEES, IF ANY, YOU PAID DIRECTLY TO MICROCHIP FOR
+ THIS SOFTWARE.
+*/
+
+#ifndef USB_CONFIG_H
+#define USB_CONFIG_H
+
+#include <stdint.h>
+#include <usb_common_elements.h>
+
+/**
+ * @ingroup usb_device_stack
+ * @def USB_EP_NUM
+ * @brief Limits the size of the endpoint table and transfer array in the RAM
+ * to 1 + the highest endpoint address used by the application.
+ */
+#define USB_EP_NUM 2U
+
+/**
+ * @ingroup usb_device_stack
+ * @def USB_EP0_SIZE
+ * @brief Controls the packet size of endpoint 0 and must correspond to bMaxPacketSize0 in the device descriptor.
+ */
+#define USB_EP0_SIZE 64U
+
+/**
+ * @ingroup usb_device_stack
+ * @def LANG_ID_NUM
+ * @brief Controls the number of language IDs supported by the application.
+ */
+#define LANG_ID_NUM 1U
+
+/**
+ * @ingroup usb_device_stack
+ * @name USB Endpoint Addresses
+ * Macros for the endpoint addresses.
+ */
+///@{
+#define INTERFACE0ALTERNATE1_ISOCHRONOUS_EP1_IN 1U
+///@}
+
+/**
+ * @ingroup usb_device_stack
+ * @name USB Endpoint Packet Sizes
+ * Macros for the endpoint packet sizes.
+ */
+///@{
+#define INTERFACE0ALTERNATE1_ISOCHRONOUS_EP1_IN_SIZE 64U
+///@}
+
+/**
+ * @ingroup usb_device_stack
+ * @def USB_INTERFACE_NUM
+ * @brief The number of interfaces used by a configuration, excluding alternate interfaces.
+ */
+#define USB_INTERFACE_NUM 1U
+
+/**
+ * @ingroup usb_device_stack
+ * @struct USB_EP_STATIC_CONFIG_BITS_struct
+ * @brief Static endpoint settings.
+ */
+typedef struct USB_EP_STATIC_CONFIG_BITS_struct
+{
+ uint8_t InMultipktEnable : 1;
+ uint8_t InAzlpEnable : 1;
+ uint8_t InTrncInterruptEnable : 1;
+ uint8_t OutMultipktEnable : 1;
+ uint8_t OutAzlpEnable : 1;
+ uint8_t OutTrncInterruptEnable : 1;
+ uint8_t reserved : 2;
+} USB_EP_STATIC_CONFIG_BITS_t;
+
+/**
+ * @ingroup usb_device_stack
+ * @struct endpointStaticConfig
+ * @brief Configuration of static endpoint settings.
+ */
+static const USB_EP_STATIC_CONFIG_BITS_t endpointStaticConfig [USB_EP_NUM] = {
+ [0] = {.InTrncInterruptEnable = 1, .OutTrncInterruptEnable = 1, .InMultipktEnable = 1, .InAzlpEnable = 0, .OutMultipktEnable = 1, .OutAzlpEnable = 0},
+ [1] = {.InTrncInterruptEnable = 1, .OutTrncInterruptEnable = 1, .InMultipktEnable = 0, .InAzlpEnable = 0},
+};
+
+#endif // USB_CONFIG_H
+/**
+ End of File
+*/
|
