/**
  PIN MANAGER Generated Driver File

  @Company:
    Microchip Technology Inc.

  @File Name:
    pin_manager.h

  @Summary:
    This is the generated manager file for the PIC24 / dsPIC33 / PIC32MM MCUs device.  This manager
    configures the pins direction, initial state, analog setting.

  @Description:
    This source file provides implementations for PIN MANAGER.
    Generation Information :
        Product Revision  :  PIC24 / dsPIC33 / PIC32MM MCUs - 1.171.4
        Device            :  PIC24FV16KM202
    The generated drivers are tested against the following:
        Compiler          :  XC16 v2.10
        MPLAB 	          :  MPLAB X v6.05
*/

/*
    (c) 2020 Microchip Technology Inc. and its subsidiaries. You may use this
    software and any derivatives exclusively with Microchip products.

    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED
    WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
    PARTICULAR PURPOSE, OR ITS INTERACTION WITH MICROCHIP PRODUCTS, COMBINATION
    WITH ANY OTHER PRODUCTS, OR USE IN ANY APPLICATION.

    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS
    BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE
    FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN
    ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
    THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.

    MICROCHIP PROVIDES THIS SOFTWARE CONDITIONALLY UPON YOUR ACCEPTANCE OF THESE
    TERMS.
*/

#ifndef _PIN_MANAGER_H
#define _PIN_MANAGER_H
/**
    Section: Includes
*/
#include <xc.h>

/**
    Section: Device Pin Macros
*/
/**
  @Summary
    Sets the GPIO pin, RA0, high using LATA0.

  @Description
    Sets the GPIO pin, RA0, high using LATA0.

  @Preconditions
    The RA0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA0 high (1)
    IO_RA0_SetHigh();
    </code>

*/
#define IO_RA0_SetHigh()          (_LATA0 = 1)
/**
  @Summary
    Sets the GPIO pin, RA0, low using LATA0.

  @Description
    Sets the GPIO pin, RA0, low using LATA0.

  @Preconditions
    The RA0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA0 low (0)
    IO_RA0_SetLow();
    </code>

*/
#define IO_RA0_SetLow()           (_LATA0 = 0)
/**
  @Summary
    Toggles the GPIO pin, RA0, using LATA0.

  @Description
    Toggles the GPIO pin, RA0, using LATA0.

  @Preconditions
    The RA0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RA0
    IO_RA0_Toggle();
    </code>

*/
#define IO_RA0_Toggle()           (_LATA0 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RA0.

  @Description
    Reads the value of the GPIO pin, RA0.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RA0
    postValue = IO_RA0_GetValue();
    </code>

*/
#define IO_RA0_GetValue()         _RA0
/**
  @Summary
    Configures the GPIO pin, RA0, as an input.

  @Description
    Configures the GPIO pin, RA0, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA0 as an input
    IO_RA0_SetDigitalInput();
    </code>

*/
#define IO_RA0_SetDigitalInput()  (_TRISA0 = 1)
/**
  @Summary
    Configures the GPIO pin, RA0, as an output.

  @Description
    Configures the GPIO pin, RA0, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA0 as an output
    IO_RA0_SetDigitalOutput();
    </code>

*/
#define IO_RA0_SetDigitalOutput() (_TRISA0 = 0)
/**
  @Summary
    Sets the GPIO pin, RA1, high using LATA1.

  @Description
    Sets the GPIO pin, RA1, high using LATA1.

  @Preconditions
    The RA1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA1 high (1)
    IO_RA1_SetHigh();
    </code>

*/
#define IO_RA1_SetHigh()          (_LATA1 = 1)
/**
  @Summary
    Sets the GPIO pin, RA1, low using LATA1.

  @Description
    Sets the GPIO pin, RA1, low using LATA1.

  @Preconditions
    The RA1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA1 low (0)
    IO_RA1_SetLow();
    </code>

*/
#define IO_RA1_SetLow()           (_LATA1 = 0)
/**
  @Summary
    Toggles the GPIO pin, RA1, using LATA1.

  @Description
    Toggles the GPIO pin, RA1, using LATA1.

  @Preconditions
    The RA1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RA1
    IO_RA1_Toggle();
    </code>

*/
#define IO_RA1_Toggle()           (_LATA1 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RA1.

  @Description
    Reads the value of the GPIO pin, RA1.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RA1
    postValue = IO_RA1_GetValue();
    </code>

*/
#define IO_RA1_GetValue()         _RA1
/**
  @Summary
    Configures the GPIO pin, RA1, as an input.

  @Description
    Configures the GPIO pin, RA1, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA1 as an input
    IO_RA1_SetDigitalInput();
    </code>

*/
#define IO_RA1_SetDigitalInput()  (_TRISA1 = 1)
/**
  @Summary
    Configures the GPIO pin, RA1, as an output.

  @Description
    Configures the GPIO pin, RA1, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA1 as an output
    IO_RA1_SetDigitalOutput();
    </code>

*/
#define IO_RA1_SetDigitalOutput() (_TRISA1 = 0)
/**
  @Summary
    Sets the GPIO pin, RA4, high using LATA4.

  @Description
    Sets the GPIO pin, RA4, high using LATA4.

  @Preconditions
    The RA4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA4 high (1)
    IO_RA4_SetHigh();
    </code>

*/
#define IO_RA4_SetHigh()          (_LATA4 = 1)
/**
  @Summary
    Sets the GPIO pin, RA4, low using LATA4.

  @Description
    Sets the GPIO pin, RA4, low using LATA4.

  @Preconditions
    The RA4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RA4 low (0)
    IO_RA4_SetLow();
    </code>

*/
#define IO_RA4_SetLow()           (_LATA4 = 0)
/**
  @Summary
    Toggles the GPIO pin, RA4, using LATA4.

  @Description
    Toggles the GPIO pin, RA4, using LATA4.

  @Preconditions
    The RA4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RA4
    IO_RA4_Toggle();
    </code>

*/
#define IO_RA4_Toggle()           (_LATA4 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RA4.

  @Description
    Reads the value of the GPIO pin, RA4.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RA4
    postValue = IO_RA4_GetValue();
    </code>

*/
#define IO_RA4_GetValue()         _RA4
/**
  @Summary
    Configures the GPIO pin, RA4, as an input.

  @Description
    Configures the GPIO pin, RA4, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA4 as an input
    IO_RA4_SetDigitalInput();
    </code>

*/
#define IO_RA4_SetDigitalInput()  (_TRISA4 = 1)
/**
  @Summary
    Configures the GPIO pin, RA4, as an output.

  @Description
    Configures the GPIO pin, RA4, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RA4 as an output
    IO_RA4_SetDigitalOutput();
    </code>

*/
#define IO_RA4_SetDigitalOutput() (_TRISA4 = 0)
/**
  @Summary
    Sets the GPIO pin, RB6, high using LATB6.

  @Description
    Sets the GPIO pin, RB6, high using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB6 high (1)
    IO_RB6_SetHigh();
    </code>

*/
#define IO_RB6_SetHigh()          (_LATB6 = 1)
/**
  @Summary
    Sets the GPIO pin, RB6, low using LATB6.

  @Description
    Sets the GPIO pin, RB6, low using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB6 low (0)
    IO_RB6_SetLow();
    </code>

*/
#define IO_RB6_SetLow()           (_LATB6 = 0)
/**
  @Summary
    Toggles the GPIO pin, RB6, using LATB6.

  @Description
    Toggles the GPIO pin, RB6, using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB6
    IO_RB6_Toggle();
    </code>

*/
#define IO_RB6_Toggle()           (_LATB6 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RB6.

  @Description
    Reads the value of the GPIO pin, RB6.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB6
    postValue = IO_RB6_GetValue();
    </code>

*/
#define IO_RB6_GetValue()         _RB6
/**
  @Summary
    Configures the GPIO pin, RB6, as an input.

  @Description
    Configures the GPIO pin, RB6, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB6 as an input
    IO_RB6_SetDigitalInput();
    </code>

*/
#define IO_RB6_SetDigitalInput()  (_TRISB6 = 1)
/**
  @Summary
    Configures the GPIO pin, RB6, as an output.

  @Description
    Configures the GPIO pin, RB6, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB6 as an output
    IO_RB6_SetDigitalOutput();
    </code>

*/
#define IO_RB6_SetDigitalOutput() (_TRISB6 = 0)
/**
  @Summary
    Sets the GPIO pin, RB7, high using LATB7.

  @Description
    Sets the GPIO pin, RB7, high using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB7 high (1)
    IO_RB7_SetHigh();
    </code>

*/
#define IO_RB7_SetHigh()          (_LATB7 = 1)
/**
  @Summary
    Sets the GPIO pin, RB7, low using LATB7.

  @Description
    Sets the GPIO pin, RB7, low using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB7 low (0)
    IO_RB7_SetLow();
    </code>

*/
#define IO_RB7_SetLow()           (_LATB7 = 0)
/**
  @Summary
    Toggles the GPIO pin, RB7, using LATB7.

  @Description
    Toggles the GPIO pin, RB7, using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB7
    IO_RB7_Toggle();
    </code>

*/
#define IO_RB7_Toggle()           (_LATB7 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RB7.

  @Description
    Reads the value of the GPIO pin, RB7.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB7
    postValue = IO_RB7_GetValue();
    </code>

*/
#define IO_RB7_GetValue()         _RB7
/**
  @Summary
    Configures the GPIO pin, RB7, as an input.

  @Description
    Configures the GPIO pin, RB7, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB7 as an input
    IO_RB7_SetDigitalInput();
    </code>

*/
#define IO_RB7_SetDigitalInput()  (_TRISB7 = 1)
/**
  @Summary
    Configures the GPIO pin, RB7, as an output.

  @Description
    Configures the GPIO pin, RB7, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB7 as an output
    IO_RB7_SetDigitalOutput();
    </code>

*/
#define IO_RB7_SetDigitalOutput() (_TRISB7 = 0)
/**
  @Summary
    Sets the GPIO pin, RB8, high using LATB8.

  @Description
    Sets the GPIO pin, RB8, high using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB8 high (1)
    IO_RB8_SetHigh();
    </code>

*/
#define IO_RB8_SetHigh()          (_LATB8 = 1)
/**
  @Summary
    Sets the GPIO pin, RB8, low using LATB8.

  @Description
    Sets the GPIO pin, RB8, low using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB8 low (0)
    IO_RB8_SetLow();
    </code>

*/
#define IO_RB8_SetLow()           (_LATB8 = 0)
/**
  @Summary
    Toggles the GPIO pin, RB8, using LATB8.

  @Description
    Toggles the GPIO pin, RB8, using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB8
    IO_RB8_Toggle();
    </code>

*/
#define IO_RB8_Toggle()           (_LATB8 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RB8.

  @Description
    Reads the value of the GPIO pin, RB8.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB8
    postValue = IO_RB8_GetValue();
    </code>

*/
#define IO_RB8_GetValue()         _RB8
/**
  @Summary
    Configures the GPIO pin, RB8, as an input.

  @Description
    Configures the GPIO pin, RB8, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB8 as an input
    IO_RB8_SetDigitalInput();
    </code>

*/
#define IO_RB8_SetDigitalInput()  (_TRISB8 = 1)
/**
  @Summary
    Configures the GPIO pin, RB8, as an output.

  @Description
    Configures the GPIO pin, RB8, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB8 as an output
    IO_RB8_SetDigitalOutput();
    </code>

*/
#define IO_RB8_SetDigitalOutput() (_TRISB8 = 0)
/**
  @Summary
    Sets the GPIO pin, RB9, high using LATB9.

  @Description
    Sets the GPIO pin, RB9, high using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB9 high (1)
    IO_RB9_SetHigh();
    </code>

*/
#define IO_RB9_SetHigh()          (_LATB9 = 1)
/**
  @Summary
    Sets the GPIO pin, RB9, low using LATB9.

  @Description
    Sets the GPIO pin, RB9, low using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB9 low (0)
    IO_RB9_SetLow();
    </code>

*/
#define IO_RB9_SetLow()           (_LATB9 = 0)
/**
  @Summary
    Toggles the GPIO pin, RB9, using LATB9.

  @Description
    Toggles the GPIO pin, RB9, using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB9
    IO_RB9_Toggle();
    </code>

*/
#define IO_RB9_Toggle()           (_LATB9 ^= 1)
/**
  @Summary
    Reads the value of the GPIO pin, RB9.

  @Description
    Reads the value of the GPIO pin, RB9.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB9
    postValue = IO_RB9_GetValue();
    </code>

*/
#define IO_RB9_GetValue()         _RB9
/**
  @Summary
    Configures the GPIO pin, RB9, as an input.

  @Description
    Configures the GPIO pin, RB9, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB9 as an input
    IO_RB9_SetDigitalInput();
    </code>

*/
#define IO_RB9_SetDigitalInput()  (_TRISB9 = 1)
/**
  @Summary
    Configures the GPIO pin, RB9, as an output.

  @Description
    Configures the GPIO pin, RB9, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB9 as an output
    IO_RB9_SetDigitalOutput();
    </code>

*/
#define IO_RB9_SetDigitalOutput() (_TRISB9 = 0)

/**
    Section: Function Prototypes
*/
/**
  @Summary
    Configures the pin settings of the PIC24FV16KM202

  @Description
    This is the generated manager file for the PIC24 / dsPIC33 / PIC32MM MCUs device.  This manager
    configures the pins direction, initial state, analog setting.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    void SYSTEM_Initialize(void)
    {
        // Other initializers are called from this function
        PIN_MANAGER_Initialize();
    }
    </code>

*/
void PIN_MANAGER_Initialize (void);



#endif