/** MSSP2_I2C Generated Driver API Header File @Company Microchip Technology Inc. @File Name mssp2_i2c.h @Summary This is the generated header file for the MSSP2_I2C driver using PIC24 / dsPIC33 / PIC32MM MCUs @Description This header file provides APIs for driver for MSSP2_I2C. Generation Information : Product Revision : PIC24 / dsPIC33 / PIC32MM MCUs - 1.171.4 Device : PIC24FV16KM202 The generated drivers are tested against the following: Compiler : XC16 v2.10 MPLAB : MPLAB X v6.05 */ /* (c) 2020 Microchip Technology Inc. and its subsidiaries. You may use this software and any derivatives exclusively with Microchip products. THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, OR ITS INTERACTION WITH MICROCHIP PRODUCTS, COMBINATION WITH ANY OTHER PRODUCTS, OR USE IN ANY APPLICATION. IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. MICROCHIP PROVIDES THIS SOFTWARE CONDITIONALLY UPON YOUR ACCEPTANCE OF THESE TERMS. */ #ifndef _MSSP2_I2C_H #define _MSSP2_I2C_H #include #include #include #include #ifdef __cplusplus //* Provide C++ Compatibility */ extern "C" { #endif /** I2C Slave Driver Status @Summary Defines the different status that the slave driver has detected over the i2c bus. @Description This defines the different status that the slave driver has detected over the i2c bus. The status is passed to the MSSP2_I2C_StatusCallback() callback function that is implemented by the user of the slave driver as a parameter to inform the user that there was a change in the status of the driver due to transactions on the i2c bus. User of the slave driver can use these to manage the read or write buffers. */ typedef enum { /* This state indicates that the slave driver has detected a transmit request from the master. The next transaction will be a read transaction. Application should prime the transmit buffer with the valid data to be sent to the master using the: I2C2_ReadPointerSet() */ MSSP2_I2C_SLAVE_TRANSMIT_REQUEST_DETECTED, /* This state indicates that the slave driver has detected a reception request from the master. The next transaction will be a write transaction. Application should set up the receive buffer by setting the location of the receive buffer using the: I2C2_WritePointerSet() */ MSSP2_I2C_SLAVE_RECEIVE_REQUEST_DETECTED, /* This state indicates that the slave driver has received data from the master. Application can use this status to process the received data set up the receive buffer in anticipation of next reception in case the master sends more data. See MSSP2_I2C_SLAVE_RECEIVE_REQUEST_DETECTED. */ MSSP2_I2C_SLAVE_RECEIVED_DATA_DETECTED, /* This state indicates that the slave driver has detected the most significant byte of the 10-bit slave address. Another transaction with the least significant byte of the 10-bit address with a read/write request will be detected next. This second detection is automatically done by the driver which may return one of the following: a. MSSP2_I2C_SLAVE_RECEIVE_REQUEST_DETECTED b. MSSP2_I2C_SLAVE_TRANSMIT_REQUEST_DETECTED c. MSSP2_I2C_SLAVE_10BIT_RECEIVE_REQUEST_DETECTED a or b is detected depending on the read/write bit of the received control data. If c is detected next, the master decided to resend the most significant address. */ MSSP2_I2C_SLAVE_10BIT_RECEIVE_REQUEST_DETECTED, } MSSP2_I2C_SLAVE_DRIVER_STATUS; #define MSSP2_I2C_SLAVE_DEFAULT_ADDRESS 0x7 /** @Summary Initializes and enables the i2c slave instance : 2 @Description This routine initializes the i2c slave driver instance for : 2 index, making it ready for clients to open and use it. @Preconditions None @Param None @Returns None @Example uint8_t SlaveReadBuffer; uint8_t SlaveWriteBuffer; // initialize the i2c slave driver MSSP2_I2C_Initialize(); // set up the slave driver // initialize the location of the read buffer MSSP2_I2C_ReadPointerSet(SlaveReadBuffer); // initialize the location of the write buffer MSSP2_I2C_WritePointerSet(SlaveWriteBuffer); */ uint8_t* getTimeoutCounter(void); void resetTimeoutCounter(void); void incrementTimeoutCounter(void); void MSSP2_I2C_Initialize(void); /** @Summary This function sets the slave address mask. @Description This function sets the 10-bit slave address mask to be able to respond to multiple addresses. This function should be called after the initialization of the module. @Preconditions None @Param mask - The address mask to be used when filtering addresses from the i2c master transactions. @Returns None @Example Refer to MSSP2_I2C_SlaveAddressSet() for an example */ void MSSP2_I2C_SlaveAddressMaskSet( uint16_t mask); /** @Summary This function sets the slave address. @Description This function sets the 10-bit slave address to be used by the module when filtering transactions from the i2c masters in the bus. The function analyzes the given address and decides if the 10-bit or 7-bit mode will be enabled. Once the function returns, the given address is set for the slave module. This function should be called after the initialization of the module. When changing the slave address the module must be idle. @Preconditions None @Param address - The address to be used to determine if the transaction is intended for this slave module. @Returns None @Example // initialize the i2c slave driver MSSP2_I2C_Initializer(); // set the slave address and address mask if the default // values set in the initialize is not the desired values. MSSP2_I2C_SlaveAddressMaskSet(0x0xF); MSSP2_I2C_SlaveAddressSet(0x3C); */ void MSSP2_I2C_SlaveAddressSet( uint16_t address); /** @Summary This function sets the read pointer for the slave driver. @Description This function sets the read pointer that the driver will need to retrieve data that will be transmitted to the master whenever the master requests a read. @Preconditions None @Param *p - The pointer to the read buffer, that will be used to transmit data to the requesting i2c master. @Returns None @Example Refer to MSSP2_I2C_Initialize() for an example */ void MSSP2_I2C_ReadPointerSet(uint8_t *p); /** @Summary This function sets the write pointer for the slave driver. @Description This function sets the write pointer that the driver will need to save data that will be received from the master whenever the master requests a write. @Preconditions None @Param *p - The pointer to the read buffer, that will be used to transmit data to the requesting i2c master. @Returns None @Example Refer to MSSP2_I2C_Initialize() for an example */ void MSSP2_I2C_WritePointerSet(uint8_t *p); /** @Summary This function returns the current read pointer used by the slave driver. @Description This function returns the current read pointer used by the slave driver. As the operation executes, the pointer is incremented. User of the slave driver can use this function to check on the current address that the pointer is pointing to. @Preconditions None @Param None @Returns The current pointer used to transmit data to the requesting i2c master @Example uint8_t *pReadBuffer; pReadBuffer = MSSP2_I2C_ReadPointerGet(); */ uint8_t *MSSP2_I2C_ReadPointerGet(void); /** @Summary This function returns the current write pointer used by the slave driver. @Description This function returns the current write pointer used by the slave driver. As the operation executes, the pointer is incremented. User of the slave driver can use this function to check on the current address that the pointer is pointing to. @Preconditions None @Param None @Returns The current pointer used to save received data from the requesting i2c master @Example uint8_t *pWriteBuffer; pWriteBuffer = MSSP2_I2C_WritePointerGet(); */ uint8_t getI2CArray(uint8_t); void setI2CArray(uint8_t index, uint8_t value); uint8_t *MSSP2_I2C_WritePointerGet(void); /** @Summary This application implemented function passes the status of the i2c slave driver. @Description This application implemented function passes the status of the i2c slave driver. The status passed can be used by the application to manage the read and write buffers. This function is called by the slave driver everytime there is an event in the i2c bus that caused an interrupt in the i2c slave module to be asserted. The function will return boolean. The value of the return will determine if the next received byte will be ack'ed or nack'ed. By doing that, the application can have the ability to delay incoming transactions. When a false is returned, the next transactions will be nack'ed forcing the master to restart the transactions. Returning a false will give the application a chance to prepare for the next transactions (for example: a read requests from the master) or process the recently received data. @Preconditions None @Param status - The latest status of the slave driver due to an event in the i2c bus. @Returns True, if the application is ready for the next transaction. False, if the application is not ready for the next transaction. @Example // Example implementation of the callback static uint8_t mssp2_i2c_slaveWriteData = 0xAA; bool MSSP2_I2C_StatusCallback(MSSP2_I2C_SLAVE_DRIVER_STATUS status) { // this emulates the slave device memory where data written to slave // is placed and data read from slave is taken static uint8_t EMULATE_EEPROM_Memory[64] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, }; static uint16_t address, addrByteCount; static bool addressState = true; switch (status) { case MSSP2_I2C_SLAVE_TRANSMIT_REQUEST_DETECTED: // set up the slave driver buffer transmit pointer MSSP2_I2C_ReadPointerSet(&EMULATE_EEPROM_Memory[address]); address++; break; case MSSP2_I2C_SLAVE_RECEIVE_REQUEST_DETECTED: addrByteCount = 0; addressState = true; // set up the slave driver buffer receive pointer MSSP2_I2C_WritePointerSet(&mssp2_i2c_slaveWriteData); break; case MSSP2_I2C_SLAVE_RECEIVED_DATA_DETECTED: if (addressState == true) { // get the address of the memory being written if (addrByteCount == 0) { address = (mssp2_i2c_slaveWriteData << 8) & 0xFF00; addrByteCount++; } else if (addrByteCount == 1) { address = address | mssp2_i2c_slaveWriteData; addrByteCount = 0; addressState = false; } } else // if (addressState == false) { // set the memory with the received data EMULATE_EEPROM_Memory[address] = mssp2_i2c_slaveWriteData; } break; case MSSP2_I2C_SLAVE_10BIT_RECEIVE_REQUEST_DETECTED: // do something here when 10-bit address is detected // 10-bit address is detected break; default: break; } return true; } */ #pragma message "MSSP2_I2C_StatusCallback() is an Application implemented function. If this function is already implemented, you can turn off this message by deleting or commenting out this message." bool MSSP2_I2C_StatusCallback(MSSP2_I2C_SLAVE_DRIVER_STATUS status); #ifdef __cplusplus // Provide C++ Compatibility } #endif #endif /* _MSSP2_I2C_H */