1 files changed, 1113 insertions, 0 deletions
diff --git a/mcc_generated_files/pin_manager.h b/mcc_generated_files/pin_manager.h
new file mode 100644
index 0000000..8f18362
--- /dev/null
+++ b/mcc_generated_files/pin_manager.h
@@ -0,0 +1,1113 @@
+/**
+  PIN MANAGER Generated Driver File
+
+  @Company:
+    Microchip Technology Inc.
+
+  @File Name:
+    pin_manager.h
+
+  @Summary:
+    This is the generated manager file for the PIC24 / dsPIC33 / PIC32MM MCUs device.  This manager
+    configures the pins direction, initial state, analog setting.
+
+  @Description:
+    This source file provides implementations for PIN MANAGER.
+    Generation Information :
+        Product Revision  :  PIC24 / dsPIC33 / PIC32MM MCUs - 1.171.4
+        Device            :  PIC24FV16KM202
+    The generated drivers are tested against the following:
+        Compiler          :  XC16 v2.10
+        MPLAB 	          :  MPLAB X v6.05
+*/
+
+/*
+    (c) 2020 Microchip Technology Inc. and its subsidiaries. You may use this
+    software and any derivatives exclusively with Microchip products.
+
+    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
+    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED
+    WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
+    PARTICULAR PURPOSE, OR ITS INTERACTION WITH MICROCHIP PRODUCTS, COMBINATION
+    WITH ANY OTHER PRODUCTS, OR USE IN ANY APPLICATION.
+
+    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
+    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
+    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS
+    BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE
+    FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN
+    ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
+    THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
+
+    MICROCHIP PROVIDES THIS SOFTWARE CONDITIONALLY UPON YOUR ACCEPTANCE OF THESE
+    TERMS.
+*/
+
+#ifndef _PIN_MANAGER_H
+#define _PIN_MANAGER_H
+/**
+    Section: Includes
+*/
+#include <xc.h>
+
+/**
+    Section: Device Pin Macros
+*/
+/**
+  @Summary
+    Sets the GPIO pin, RA0, high using LATA0.
+
+  @Description
+    Sets the GPIO pin, RA0, high using LATA0.
+
+  @Preconditions
+    The RA0 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA0 high (1)
+    IO_RA0_SetHigh();
+    </code>
+
+*/
+#define IO_RA0_SetHigh()          (_LATA0 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RA0, low using LATA0.
+
+  @Description
+    Sets the GPIO pin, RA0, low using LATA0.
+
+  @Preconditions
+    The RA0 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA0 low (0)
+    IO_RA0_SetLow();
+    </code>
+
+*/
+#define IO_RA0_SetLow()           (_LATA0 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RA0, using LATA0.
+
+  @Description
+    Toggles the GPIO pin, RA0, using LATA0.
+
+  @Preconditions
+    The RA0 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RA0
+    IO_RA0_Toggle();
+    </code>
+
+*/
+#define IO_RA0_Toggle()           (_LATA0 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RA0.
+
+  @Description
+    Reads the value of the GPIO pin, RA0.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RA0
+    postValue = IO_RA0_GetValue();
+    </code>
+
+*/
+#define IO_RA0_GetValue()         _RA0
+/**
+  @Summary
+    Configures the GPIO pin, RA0, as an input.
+
+  @Description
+    Configures the GPIO pin, RA0, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA0 as an input
+    IO_RA0_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RA0_SetDigitalInput()  (_TRISA0 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RA0, as an output.
+
+  @Description
+    Configures the GPIO pin, RA0, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA0 as an output
+    IO_RA0_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RA0_SetDigitalOutput() (_TRISA0 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RA1, high using LATA1.
+
+  @Description
+    Sets the GPIO pin, RA1, high using LATA1.
+
+  @Preconditions
+    The RA1 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA1 high (1)
+    IO_RA1_SetHigh();
+    </code>
+
+*/
+#define IO_RA1_SetHigh()          (_LATA1 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RA1, low using LATA1.
+
+  @Description
+    Sets the GPIO pin, RA1, low using LATA1.
+
+  @Preconditions
+    The RA1 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA1 low (0)
+    IO_RA1_SetLow();
+    </code>
+
+*/
+#define IO_RA1_SetLow()           (_LATA1 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RA1, using LATA1.
+
+  @Description
+    Toggles the GPIO pin, RA1, using LATA1.
+
+  @Preconditions
+    The RA1 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RA1
+    IO_RA1_Toggle();
+    </code>
+
+*/
+#define IO_RA1_Toggle()           (_LATA1 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RA1.
+
+  @Description
+    Reads the value of the GPIO pin, RA1.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RA1
+    postValue = IO_RA1_GetValue();
+    </code>
+
+*/
+#define IO_RA1_GetValue()         _RA1
+/**
+  @Summary
+    Configures the GPIO pin, RA1, as an input.
+
+  @Description
+    Configures the GPIO pin, RA1, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA1 as an input
+    IO_RA1_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RA1_SetDigitalInput()  (_TRISA1 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RA1, as an output.
+
+  @Description
+    Configures the GPIO pin, RA1, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA1 as an output
+    IO_RA1_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RA1_SetDigitalOutput() (_TRISA1 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RA4, high using LATA4.
+
+  @Description
+    Sets the GPIO pin, RA4, high using LATA4.
+
+  @Preconditions
+    The RA4 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA4 high (1)
+    IO_RA4_SetHigh();
+    </code>
+
+*/
+#define IO_RA4_SetHigh()          (_LATA4 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RA4, low using LATA4.
+
+  @Description
+    Sets the GPIO pin, RA4, low using LATA4.
+
+  @Preconditions
+    The RA4 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RA4 low (0)
+    IO_RA4_SetLow();
+    </code>
+
+*/
+#define IO_RA4_SetLow()           (_LATA4 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RA4, using LATA4.
+
+  @Description
+    Toggles the GPIO pin, RA4, using LATA4.
+
+  @Preconditions
+    The RA4 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RA4
+    IO_RA4_Toggle();
+    </code>
+
+*/
+#define IO_RA4_Toggle()           (_LATA4 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RA4.
+
+  @Description
+    Reads the value of the GPIO pin, RA4.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RA4
+    postValue = IO_RA4_GetValue();
+    </code>
+
+*/
+#define IO_RA4_GetValue()         _RA4
+/**
+  @Summary
+    Configures the GPIO pin, RA4, as an input.
+
+  @Description
+    Configures the GPIO pin, RA4, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA4 as an input
+    IO_RA4_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RA4_SetDigitalInput()  (_TRISA4 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RA4, as an output.
+
+  @Description
+    Configures the GPIO pin, RA4, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RA4 as an output
+    IO_RA4_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RA4_SetDigitalOutput() (_TRISA4 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RB6, high using LATB6.
+
+  @Description
+    Sets the GPIO pin, RB6, high using LATB6.
+
+  @Preconditions
+    The RB6 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB6 high (1)
+    IO_RB6_SetHigh();
+    </code>
+
+*/
+#define IO_RB6_SetHigh()          (_LATB6 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RB6, low using LATB6.
+
+  @Description
+    Sets the GPIO pin, RB6, low using LATB6.
+
+  @Preconditions
+    The RB6 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB6 low (0)
+    IO_RB6_SetLow();
+    </code>
+
+*/
+#define IO_RB6_SetLow()           (_LATB6 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RB6, using LATB6.
+
+  @Description
+    Toggles the GPIO pin, RB6, using LATB6.
+
+  @Preconditions
+    The RB6 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RB6
+    IO_RB6_Toggle();
+    </code>
+
+*/
+#define IO_RB6_Toggle()           (_LATB6 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RB6.
+
+  @Description
+    Reads the value of the GPIO pin, RB6.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RB6
+    postValue = IO_RB6_GetValue();
+    </code>
+
+*/
+#define IO_RB6_GetValue()         _RB6
+/**
+  @Summary
+    Configures the GPIO pin, RB6, as an input.
+
+  @Description
+    Configures the GPIO pin, RB6, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB6 as an input
+    IO_RB6_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RB6_SetDigitalInput()  (_TRISB6 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RB6, as an output.
+
+  @Description
+    Configures the GPIO pin, RB6, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB6 as an output
+    IO_RB6_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RB6_SetDigitalOutput() (_TRISB6 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RB7, high using LATB7.
+
+  @Description
+    Sets the GPIO pin, RB7, high using LATB7.
+
+  @Preconditions
+    The RB7 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB7 high (1)
+    IO_RB7_SetHigh();
+    </code>
+
+*/
+#define IO_RB7_SetHigh()          (_LATB7 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RB7, low using LATB7.
+
+  @Description
+    Sets the GPIO pin, RB7, low using LATB7.
+
+  @Preconditions
+    The RB7 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB7 low (0)
+    IO_RB7_SetLow();
+    </code>
+
+*/
+#define IO_RB7_SetLow()           (_LATB7 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RB7, using LATB7.
+
+  @Description
+    Toggles the GPIO pin, RB7, using LATB7.
+
+  @Preconditions
+    The RB7 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RB7
+    IO_RB7_Toggle();
+    </code>
+
+*/
+#define IO_RB7_Toggle()           (_LATB7 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RB7.
+
+  @Description
+    Reads the value of the GPIO pin, RB7.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RB7
+    postValue = IO_RB7_GetValue();
+    </code>
+
+*/
+#define IO_RB7_GetValue()         _RB7
+/**
+  @Summary
+    Configures the GPIO pin, RB7, as an input.
+
+  @Description
+    Configures the GPIO pin, RB7, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB7 as an input
+    IO_RB7_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RB7_SetDigitalInput()  (_TRISB7 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RB7, as an output.
+
+  @Description
+    Configures the GPIO pin, RB7, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB7 as an output
+    IO_RB7_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RB7_SetDigitalOutput() (_TRISB7 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RB8, high using LATB8.
+
+  @Description
+    Sets the GPIO pin, RB8, high using LATB8.
+
+  @Preconditions
+    The RB8 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB8 high (1)
+    IO_RB8_SetHigh();
+    </code>
+
+*/
+#define IO_RB8_SetHigh()          (_LATB8 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RB8, low using LATB8.
+
+  @Description
+    Sets the GPIO pin, RB8, low using LATB8.
+
+  @Preconditions
+    The RB8 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB8 low (0)
+    IO_RB8_SetLow();
+    </code>
+
+*/
+#define IO_RB8_SetLow()           (_LATB8 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RB8, using LATB8.
+
+  @Description
+    Toggles the GPIO pin, RB8, using LATB8.
+
+  @Preconditions
+    The RB8 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RB8
+    IO_RB8_Toggle();
+    </code>
+
+*/
+#define IO_RB8_Toggle()           (_LATB8 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RB8.
+
+  @Description
+    Reads the value of the GPIO pin, RB8.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RB8
+    postValue = IO_RB8_GetValue();
+    </code>
+
+*/
+#define IO_RB8_GetValue()         _RB8
+/**
+  @Summary
+    Configures the GPIO pin, RB8, as an input.
+
+  @Description
+    Configures the GPIO pin, RB8, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB8 as an input
+    IO_RB8_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RB8_SetDigitalInput()  (_TRISB8 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RB8, as an output.
+
+  @Description
+    Configures the GPIO pin, RB8, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB8 as an output
+    IO_RB8_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RB8_SetDigitalOutput() (_TRISB8 = 0)
+/**
+  @Summary
+    Sets the GPIO pin, RB9, high using LATB9.
+
+  @Description
+    Sets the GPIO pin, RB9, high using LATB9.
+
+  @Preconditions
+    The RB9 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB9 high (1)
+    IO_RB9_SetHigh();
+    </code>
+
+*/
+#define IO_RB9_SetHigh()          (_LATB9 = 1)
+/**
+  @Summary
+    Sets the GPIO pin, RB9, low using LATB9.
+
+  @Description
+    Sets the GPIO pin, RB9, low using LATB9.
+
+  @Preconditions
+    The RB9 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Set RB9 low (0)
+    IO_RB9_SetLow();
+    </code>
+
+*/
+#define IO_RB9_SetLow()           (_LATB9 = 0)
+/**
+  @Summary
+    Toggles the GPIO pin, RB9, using LATB9.
+
+  @Description
+    Toggles the GPIO pin, RB9, using LATB9.
+
+  @Preconditions
+    The RB9 must be set to an output.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Toggle RB9
+    IO_RB9_Toggle();
+    </code>
+
+*/
+#define IO_RB9_Toggle()           (_LATB9 ^= 1)
+/**
+  @Summary
+    Reads the value of the GPIO pin, RB9.
+
+  @Description
+    Reads the value of the GPIO pin, RB9.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    uint16_t portValue;
+
+    // Read RB9
+    postValue = IO_RB9_GetValue();
+    </code>
+
+*/
+#define IO_RB9_GetValue()         _RB9
+/**
+  @Summary
+    Configures the GPIO pin, RB9, as an input.
+
+  @Description
+    Configures the GPIO pin, RB9, as an input.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB9 as an input
+    IO_RB9_SetDigitalInput();
+    </code>
+
+*/
+#define IO_RB9_SetDigitalInput()  (_TRISB9 = 1)
+/**
+  @Summary
+    Configures the GPIO pin, RB9, as an output.
+
+  @Description
+    Configures the GPIO pin, RB9, as an output.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    // Sets the RB9 as an output
+    IO_RB9_SetDigitalOutput();
+    </code>
+
+*/
+#define IO_RB9_SetDigitalOutput() (_TRISB9 = 0)
+
+/**
+    Section: Function Prototypes
+*/
+/**
+  @Summary
+    Configures the pin settings of the PIC24FV16KM202
+
+  @Description
+    This is the generated manager file for the PIC24 / dsPIC33 / PIC32MM MCUs device.  This manager
+    configures the pins direction, initial state, analog setting.
+
+  @Preconditions
+    None.
+
+  @Returns
+    None.
+
+  @Param
+    None.
+
+  @Example
+    <code>
+    void SYSTEM_Initialize(void)
+    {
+        // Other initializers are called from this function
+        PIN_MANAGER_Initialize();
+    }
+    </code>
+
+*/
+void PIN_MANAGER_Initialize (void);
+
+
+
+#endif