summaryrefslogtreecommitdiff
path: root/Arduino/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'Arduino/main.c')
-rw-r--r--Arduino/main.c/main.c.ino23
1 files changed, 16 insertions, 7 deletions
diff --git a/Arduino/main.c/main.c.ino b/Arduino/main.c/main.c.ino
index 2efa972..94570bc 100644
--- a/Arduino/main.c/main.c.ino
+++ b/Arduino/main.c/main.c.ino
@@ -2,7 +2,7 @@
double VOLTAGE;
double P150;
double P100;
-double load;
+double load = 0;
int Q150;
int Q100;
void setup()
@@ -10,17 +10,24 @@ void setup()
Wire.begin(0x00);
Serial.begin(9600);
Serial.println("Enter Nominal System Voltage:");
- VOLTAGE = Serial.read();
+ while (Serial.available() == 0){;}
+ VOLTAGE = Serial.parseFloat(SKIP_ALL);
Serial.print("System Voltage: ");
Serial.println(VOLTAGE, DEC);
- P150 = VOLTAGE/150;
- P100 = VOLTAGE/100;
+ P150 = (VOLTAGE*VOLTAGE)/150;
+ P100 = (VOLTAGE*VOLTAGE)/100;
Serial.println("Enter Load in kW:");
}
void loop()
{
- load = Serial.read();
+ Serial.flush();
+ //while (!Serial.available()){;}
+ double temp = Serial.parseFloat(SKIP_ALL)*1000;
+
+ if((temp != load)&&(temp > 0))
+ {
+ load = temp;
if(VOLTAGE <= 500) //We don't want to use the 100ohm resistors if the voltage is higher than 500 as they would draw excessive power.
{
Q100 = load/P100;
@@ -38,8 +45,10 @@ void loop()
Serial.print(" 150ohm and ");
Serial.print(Q100, DEC);
Serial.print(" 100ohm resistors will be activated. ");
- Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC);
- Serial.println("kW unaccounted for.");
+ //Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC);
+ Serial.print(((P150*Q150)+(P100*Q100)),DEC);
+ Serial.println("W Accounted for.");
+ }
Wire.beginTransmission(0x01); //Controller Board Has Address 0x01
Wire.write((Q150 << 3) & Q150);
Wire.endTransmission();