summaryrefslogtreecommitdiff
path: root/Arduino/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'Arduino/main.c')
-rw-r--r--Arduino/main.c/main.c.ino26
1 files changed, 13 insertions, 13 deletions
diff --git a/Arduino/main.c/main.c.ino b/Arduino/main.c/main.c.ino
index cf6ea90..c527c33 100644
--- a/Arduino/main.c/main.c.ino
+++ b/Arduino/main.c/main.c.ino
@@ -1,8 +1,8 @@
#include <Wire.h>
-double VOLTAGE, P100, P150;
+double VOLTAGE, P68, P150;
double temp, load = 0;
-uint8_t Q100, Q150;
+uint8_t Q68, Q150;
bool new_message = false;
void setup()
@@ -15,7 +15,7 @@ void setup()
Serial.print("System Voltage: ");
Serial.println(VOLTAGE, DEC);
P150 = (VOLTAGE * VOLTAGE) / 150;
- P100 = (VOLTAGE * VOLTAGE) / 100;
+ P68 = (VOLTAGE * VOLTAGE) / 68;
Serial.println("Enter Load in kW:");
}
@@ -28,32 +28,32 @@ void loop()
if ((temp != load) && (temp > 0))
{
load = temp;
- if (VOLTAGE <= 500) //We don't want to use the 100ohm resistors if the voltage is higher than 500 as they would draw excessive power.
+ if (VOLTAGE <= 420) //We don't want to use the 68ohm resistors if the voltage is higher than 420 as they would draw excessive power.
{
- Q100 = load / P100;
- if (Q100 > 5) Q100 = 5;
- Q150 = (load - (Q100 * P100)) / P150;
+ Q68 = load / P68;
+ if (Q68 > 5) Q68 = 5;
+ Q150 = (load - (Q68 * P68)) / P150;
}
else
{
Q150 = load / P150;
- Q100 = 0;
+ Q68 = 0;
}
if (Q150 > 15) Q150 = 15;
Serial.print("A combination of ");
Serial.print(Q150, DEC);
Serial.print(" 150ohm and ");
- Serial.print(Q100, DEC);
- Serial.print(" 100ohm resistors will be requested. ");
+ Serial.print(Q68, DEC);
+ Serial.print(" 68ohm resistors will be requested. ");
//Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC);
- Serial.print(((P150 * Q150) + (P100 * Q100)), DEC);
+ Serial.print(((P150 * Q150) + (P68 * Q68)), DEC);
Serial.println("W Accounted for.");
new_message = true;
}
delay(50);
Wire.beginTransmission(0x30); //Controller Board Has Address 0x07
Wire.write(0x01); //First "EEPROM Address" stores resistor data.
- Wire.write((Q100 << 4) | Q150);
+ Wire.write((Q68 << 4) | Q150);
Wire.endTransmission();
@@ -64,7 +64,7 @@ void loop()
int c = Wire.read();
Serial.print("Quantity of 150Ohm: ");
Serial.print(c & 0b00001111); //Print Q150
- Serial.print(" Quantity of 100Ohm: ");
+ Serial.print(" Quantity of 68Ohm: ");
Serial.print((c & 0b01110000)>>4);
Serial.println(" was recieved.");
}