1 files changed, 13 insertions, 13 deletions

diff --git a/Arduino/main.c/main.c.ino b/Arduino/main.c/main.c.ino
index cf6ea90..c527c33 100644
--- a/Arduino/main.c/main.c.ino
+++ b/Arduino/main.c/main.c.ino
@@ -1,8 +1,8 @@
 #include <Wire.h>
 
-double VOLTAGE, P100, P150;
+double VOLTAGE, P68, P150;
 double temp, load = 0;
-uint8_t Q100, Q150;
+uint8_t Q68, Q150;
 bool new_message = false;
 
 void setup()
@@ -15,7 +15,7 @@ void setup()
   Serial.print("System Voltage: ");
   Serial.println(VOLTAGE, DEC);
   P150 = (VOLTAGE * VOLTAGE) / 150;
-  P100 = (VOLTAGE * VOLTAGE) / 100;
+  P68 = (VOLTAGE * VOLTAGE) / 68;
   Serial.println("Enter Load in kW:");
 }
 
@@ -28,32 +28,32 @@ void loop()
   if ((temp != load) && (temp > 0))
   {
     load = temp;
-    if (VOLTAGE <= 500) //We don't want to use the 100ohm resistors if the voltage is higher than 500 as they would draw excessive power.
+    if (VOLTAGE <= 420) //We don't want to use the 68ohm resistors if the voltage is higher than 420 as they would draw excessive power.
     {
-      Q100 = load / P100;
-      if (Q100 > 5) Q100 = 5;
-      Q150 = (load - (Q100 * P100)) / P150;
+      Q68 = load / P68;
+      if (Q68 > 5) Q68 = 5;
+      Q150 = (load - (Q68 * P68)) / P150;
     }
     else
     {
       Q150 = load / P150;
-      Q100 = 0;
+      Q68 = 0;
     }
     if (Q150 > 15) Q150 = 15;
     Serial.print("A combination of ");
     Serial.print(Q150, DEC);
     Serial.print(" 150ohm and ");
-    Serial.print(Q100, DEC);
-    Serial.print(" 100ohm resistors will be requested. ");
+    Serial.print(Q68, DEC);
+    Serial.print(" 68ohm resistors will be requested. ");
     //Serial.print(load - ((P150*Q150)+(P100*Q100)),DEC);
-    Serial.print(((P150 * Q150) + (P100 * Q100)), DEC);
+    Serial.print(((P150 * Q150) + (P68 * Q68)), DEC);
     Serial.println("W Accounted for.");
     new_message = true;
   }
   delay(50);
   Wire.beginTransmission(0x30); //Controller Board Has Address 0x07
   Wire.write(0x01); //First "EEPROM Address" stores resistor data.
-  Wire.write((Q100 << 4) | Q150);
+  Wire.write((Q68 << 4) | Q150);
   Wire.endTransmission();
 
 
@@ -64,7 +64,7 @@ void loop()
       int c = Wire.read();
       Serial.print("Quantity of 150Ohm: ");
       Serial.print(c & 0b00001111); //Print Q150
-      Serial.print(" Quantity of 100Ohm: ");
+      Serial.print(" Quantity of 68Ohm: ");
       Serial.print((c & 0b01110000)>>4);
       Serial.println(" was recieved.");
   }